Hoses

Commercial dishwashers bottom hose to drain pump. Suitable for models: EN - 48B / Z - 220902 .

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 9mm, outer diameter 18mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 12,5mm, outer diameter 22mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Professional kitchen dishwasher / oven water drain hose. Length 1500mm. Machine end 48mm with 90 degree angle. Fits for example: Fagor FI-30, FI-48, FI-50, FI-60, FI-64, FI-72, FI-80, FI-100, FI-120.

Commercial dishwasher water drain hose. Max 90°C. Fits some Metos, Adler commercial dishwashers.

• Length 2 meters
• Inner diameter of the joint 33 mm
• Outer diameter of the joint 39 mm
• The outer diameter of the free end is 35 mm
• Inner diameter of free end 28 mm

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Steelbraided plastic coated hose. Fits for many Echtermann Euro Clean  -models.

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 100cm. Stiffer steel spiral protection. Fits for many Echtermann Euro Clean  -models.

Commercial dishwasher detergent pump hose 135 mm. Suitable for e.g. Germac G290, G295, G300, G305, G43, G45, G53, G54, G650, G55.

• THERMOPLASTIC HOSE ø 6.2x10.2 mm
• Total length including ends 185 mm
• Hose section length 115 mm
• Length from one attachment point to another 135 mm

Commercial dishwasher drain hose with over flow pipe. Length 2000 mm. Length of replacement air hose 780 mm. Fits many Electrolux Professional NUC, EUC, WT, ZUC series models with drain pump. Check the fit table for your model.

Commercial dishwasher detergent hose. Hard PE-plastic, suitable for dispensers with quick connectors, such as 864218. Fits many commercial kitchen under counter dishwashers and hood type machines.

• Outer diameter 6 mm
• Inner diameter 4 mm
• Length 2 m

Rubber connection sleeve for commercial hood type dishwasher. Connects washing pump to the water spray arms. Replaces part 0L2825. Inner diameter 50 / 45 / 50 mm, outer diameter 60 / 55 / 60 mm. Fits many Electrolux EHT8, NHT8 series hoods.

The hose inside the rinse aid pump of a commercial dishwasher. Suitable for Seko pump 1572C (PR1). Replaces parts SEKO 990009098, 9900090098. Fits many Dihr, Electrolux Professional dishwashers.

• The inner diameter of the hose is 3 mm
• The outer diameter of the hose is 8 mm
• Yellow connection nipples with nuts for 3 x 6 mm rinse aid hoses
• Length 170 mm

Professional dishwasher drain hose. Rubber machine end with 90º angle, inner diameter 40 mm. Drain end straight, inner diameter 24 mm. Hose length 2000 mm.

DN10 inlet water hose for a commercial dishwasher, pre-wash shower or other large kitchen appliance. 1/2" straight connections (inner thread circa 19 mm). Length 50 cm. Steel braided hose. Suitable for e.g. many Metos WD models.

Inlet water hose for the water boiler of a commercial dishwasher. Steel braided hose DN15, inner diameter 10 mm. Connections 1/2" straight - 1/2" angle 90 degrees (inner thread circa 19 mm). Length 510 mm. Suitable for e.g. for many Metos WD6 and WD7 models.

Commercial dishwasher circulation pump rubber hose 90°, 135 x 105 mm, original spare part for models EHT6, NHT8 etc. Internal diameter 62 mm. See list for compatible models.

Rubber hose, suction pipe, leading water from the boiler of the dishwasher to the rinsing pump. Connection ends 25 mm and 28 mm. Length 210 mm. Fits many Electrolux Professional EHT8, NHT8 series hood type dishwashers. Check the compatibility with your model in the compatibility table with the information on the model label of your machine.

Washing detergent and rinse aid hose for a commercial dishwasher. 10 meters. Suitable for many detergent pumps, rinse aid pumps, e.g. For SEKO and N6 models.

• Length 10 meters
• Inner diameter 4 mm
• Outer diameter 6 mm

Drainage hose for a commercial dishwasher. Grey plastic, rubber joints. Suitable for many dishwashers in commercial kitchens and professional kitchens, e.g. Dihr, Electrolux Professional, Kromo, Mach, Metos, Olis, Silanos, Zanussi.

• Length 1500 mm
• The inner diameter of the straight end is 24 mm
• Inner diameter of the angle end is 28 mm
• 90° angle

Bottom strainer and weight intended for the detergent or rinse aid hose, detergent canister of a commercial dishwasher. A stainless steel weight holds the strainer on the hose and on the bottom of the detergent container. A steel sieve prevents debris from entering the pump. Suitable for many restaurant and professional kitchen dishwashers, Seko, Germac pumps.

• Hose connection for hose with 4 mm inner diameter and 6 mm outer diameter
• The outer dimensions of the weight are 20 x 15 mm, the hole is 7 mm
• Weight 23 grams