Print

Hoses

Inlet hoses, outlet hoses & internal hoses for commercial dishwashers.


Display per page
Sort by
Product no.: B1131
Commercial dishwashers bottom hose to drain pump. Suitable for models: EN - 48B / Z - 220902 .
Product no.: 7011

Water inlet hose for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 9mm, outer diameter 18mm. Stainless steel braided outsole. Metal 1/2" & 3/4" ends with metal nuts. Gaskets included.

Product no.: 7012

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 9mm, outer diameter 18mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7012B

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 9mm, outer diameter 18mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7033

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 12,5mm, outer diameter 22mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7034

Water inlet hose 150cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 12,5mm, outer diameter 22mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7014

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7014B

Water inlet hose 150cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 7014C

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Product no.: 00551209

Stainless steel AISI 430 hose clamper. Adjustable diameter 48-68mm. Fits for Fagor FI-30, FI-48, FI-72 dishwasher drain hose.

Product no.: 1467

Professional kitchen dishwasher / oven water drain hose. Length 1500mm. Machine end 48mm with 90 degree angle. Fits for example: Fagor FI-30, FI-48, FI-50, FI-60, FI-64, FI-72, FI-80, FI-100, FI-120.

Product no.: 1098B/2,5

Washing and fabric softener hose. Length 2,5m. 4/6 mm.

Product no.: 7006

Dishwasher drain hose. Length 2m. 32mm diameter.

Product no.: 7140

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 80cm. Steelbraided hose. Fits for many Echtermann Euro Clean  -models.

Product no.: 7142

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Steelbraided plastic coated hose. Fits for many Echtermann Euro Clean  -models.

Product no.: 7018

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Stiffer steel spiral protection. Fits for many Echtermann Euro Clean  -models.

Product no.: 7018B

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 100cm. Stiffer steel spiral protection. Fits for many Echtermann Euro Clean  -models.

Product no.: 0L2841

Commercial dishwasher water drain hose. Original spare part for many Electrolux / Zanussi AHT8, EHT8, NHT8, ZHT8 -series models.

  • Sleeves internal diameter 21 mm
  • Length 2000 mm
  • Max temperature 90°C
  • Complete with support
Product no.: 1299B

Commercial dishwasher detergent pump hose 135 mm. Suitable for e.g. Germac G290, G295, G300, G305, G43, G45, G53, G54, G650, G55.

  • THERMOPLASTIC HOSE ø 6.2x10.2 mm
  • Total length including ends 185 mm
  • Hose section length 115 mm
  • Length from one attachment point to another 135 mm
Product no.: 11251

Commercial dishwasher rubber outlet hose. Joint inner diameters of the joints 48, 35, 34 mm. Fits many Dihr HT12 models.

Product no.: 3450131

Commercial dishwasher drain hose with over flow pipe. Length 2000 mm. Length of replacement air hose 780 mm. Fits many Electrolux Professional NUC, EUC, WT, ZUC series models with drain pump. Check the fit table for your model.

Product no.: 0L1163

Commercial dishwasher rinse aid pump suction pipe 4x6. Length 2660 mm. Grey hard tube. Inner diameter 4.3 mm, outer diameter 6 mm. Fits many Electrolux, Zanussi, Alpeninox dishwashers.

Product no.: 1098E

Commercial dishwasher detergent hose. Hard PE-plastic, suitable for dispensers with quick connectors, such as 864218. Fits many commercial kitchen under counter dishwashers and hood type machines.

  • Outer diameter 6 mm
  • Inner diameter 4 mm
  • Length 2 m
Product no.: 1098E-2

Commercial dishwasher rinse aid pump suction pipe 4/6. Length 5000 mm. Blue hard tube. Inner diameter 4.0 mm, outer diameter 6 mm. Fits many  commercial kitchen under counter dishwashers and hood type machines.

Product no.: 11323

Rubber connection sleeve for commercial hood type dishwasher. Connects washing pump to the water spray arms. Replaces part 0L2825. Inner diameter 50 / 45 / 50 mm, outer diameter 60 / 55 / 60 mm. Fits many Electrolux EHT8, NHT8 series hoods.

Product no.: 1213D

Professional dishwasher tank connector, thread 12 mm, hose connectors 4 and 7 mm.

 

Product no.: 1970

The hose inside the rinse aid pump of a commercial dishwasher. Suitable for Seko pump 1572C (PR1). Replaces parts SEKO 990009098, 9900090098. Fits many Dihr, Electrolux Professional dishwashers.

  • The inner diameter of the hose is 3 mm
  • The outer diameter of the hose is 8 mm
  • Yellow connection nipples with nuts for 3 x 6 mm rinse aid hoses
  • Length 170 mm
Product no.: 11903

Professional dishwasher drain hose. Machine end 90º / 35mm, drain end straight / 40mm. Length 1600mm.

Electrolux Professional 0L4552, replaces straight hose 049856. Fits some Electrolux EHT8 dishwashers.

Product no.: 7007

Professional dishwasher drain hose. Rubber machine end with 90º angle, inner diameter 40 mm. Drain end straight, inner diameter 24 mm. Hose length 2000 mm.

Product no.: 7010

Professional dishwasher drain hose. Rubber machine end with 90º angle, inner diameter 28 mm. Drain end straight, inner diameter 24 mm. Hose length 2000 mm. Water maximum temperature 90ºC.

Product no.: 7081

DN10 inlet water hose for a commercial dishwasher, pre-wash shower or other large kitchen appliance. 1/2" straight connections (inner thread circa 19 mm). Length 50 cm. Steel braided hose. Suitable for e.g. many Metos WD models.

Product no.: Q99474

DN10 inlet water hose for a household appliance, commercial dishwasher, pre-wash shower or other large kitchen appliance. 3/4" straight connections. Length 50 cm. Steel braid hose.

Product no.: 281

Inlet water hose for the water boiler of a commercial dishwasher. Steel braided hose DN15, inner diameter 10 mm. Connections 1/2" straight - 1/2" angle 90 degrees (inner thread circa 19 mm). Length 510 mm. Suitable for e.g. for many Metos WD6 and WD7 models.

Product no.: 282

DN10 inlet water hose for a commercial dishwasher, pre-wash shower or other large kitchen appliance. 1/2" straight connections (inner thread of the connections approx. 19 mm). Length 100 cm. Inner diameter at least 7 mm. Steel braided hose.

Product no.: 0L2836

Commercial dishwasher circulation pump rubber hose 90°, 135 x 105 mm, original spare part for models EHT6, NHT8 etc. Internal diameter 62 mm. See list for compatible models.

Product no.: 11097

Commercial dishwasher internal hose, both ends inner diameter 29 mm.

Product no.: 11521

Rubber hose, suction pipe, leading water from the boiler of the dishwasher to the rinsing pump. Connection ends 25 mm and 28 mm. Length 210 mm. Fits many Electrolux Professional EHT8, NHT8 series hood type dishwashers. Check the compatibility with your model in the compatibility table with the information on the model label of your machine.