Model sticker locator
Click the appliance that you have and find out where the model sticker can be found.
Model sticker locator
Your basket is empty.
Front page Electrical accessories Power plugs / sockets
Power plugs / sockets
A screw-mounted electrical device panel socket for the mains power cable. C14 connector with three poles, suitable for three-pole C13 plug. Suitable for e.g. to many lamps and other electrical devices.
- Width 44 mm
- Height 34 mm
- Depth 20 mm
- Mounting hole 27 x 31 mm
- The distance between the attachment holes is 36 mm
- 250V 10A
- 3 x 6.3 mm flat connector to the rear
- Covered fuse box for 5x20 tube fuse (fuse not included)
- Lid has a space for extra fuse
Suitable fuse type: Keraaminen putkisulake 10A 20x5mm, 10kpl
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
Estimated delivery time: 4-10 business days.
Female Abiko flat connector 6.35 mm x 0.80 mm. Nickel steel. Sold in bags of 100 pieces.
- Suitable cable size 1.0-2.5 mm2
- Inner width for male connector 6.35 mm
- Inner height for male connector 0.8 mm
Estimated delivery time: 2-10 business days.
Cable connector Abiko. 6,35mm x 0,8mm. For cable sizes 1,0-2,5mm2. Sold in pairs.
Estimated delivery time: 2-7 business days.
Cable connector Abiko. 6,35mm x 0,8mm. For cable sizes 1,0-2,5mm2.
Estimated delivery time: 2-7 business days.
High quality male plug for car cigarette lighter outlet. Fits a 21 mm car cigarette lighter socket and by removing the red adapter also to the 12 mm smaller 12V socket. 12V 15A glass tube fuse inside plug, so it is suitable for many car refrigerators, vacuum cleaners, fans, inverters and other appliances that require high power. Screw connections for cabled, strain relief. Replaces part 7829233, 530160. Manufactured by SCI
- Voltage 12-24V DC
- 15A fuse (5x20mm)
- Total length 84 mm
- Maximum diameter 24.5 mm
- Plug diameter for cigarette lighter 21 mm
- Plug diameter under the red adapter 12mm
- Maximum conductor thickness 16AWG (1.30 mm²)
Estimated delivery time 2 - 4 business days.
6.3 mm flat connector plastic cover sleeve / insulation. Suitable for protecting and insulating 6.3 mm Abiko connectors. The shield is placed on the cable before attaching the flat connector (it is no longer possible to install this afterwards).
Estimated delivery time: 2-10 business days.
Plastic cover / insulator for the 6.3 mm flat connector. Suitable for protecting and insulating 6.3 mm Abiko connectors. The cover is installed on the connector by pushing it from the front side of the connector, this model can be installed on the connector after connecting to the wire. Sold individually.
Estimated delivery time: 4-10 business days.
A screw-fastened panel-mounted socket for the mains inlet cable of the electrical device. C14 connector with three wires, suitable for three-pole C13 plug. Suitable for e.g. to many lamps and other electrical devices.
- Width 48 mm
- Height 23 mm
- Depth 25 mm
- Installation hole 19.5 x 27 mm
- The distance between the fixing holes is 40 mm
- 250V 10A
- 3 x solder lugs with holes, to the rear
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
Estimated delivery time: 4-10 business days.
Wago Inline box connector for through wiring. With this connector, you can connect the wires in a straight line to each other. Easy-to-use levers. Suitable for all types of conductors, cross-sectional area max 4.0 mm2. The feed-through connector has a transparent body and a protective strip.
- 2-pole, you can connect two wires together
- Maximum ambient temperature 85 °C
- 0.2 to 4.0 mm² for multi-core and single-core conductors
- Transparent body
- Rated current 32 A
- Nominal voltage 450 V
- Outer dimensions 8 x 8,5 x 35 mm
Estimated delivery time: 2-7 business days.
Wago box connector for dividing wiring. With this connector, you can connect three wires together. Easy-to-use levers. Suitable for all types of conductors, cross-sectional area max 4.0 mm2. Transparent body and protective strip.
- 3-pin, you can connect three wires together
- Maximum ambient temperature 85 °C
- 0.2 to 4.0 mm² for multi-core and single-core conductors
- Transparent plastic body
- Rated current 32 A
- Nominal voltage 450 V
- External dimensions 19 x 8 x 18 mm
Estimated delivery time: 2-7 business days.
Wago box connector for dividing wiring. With this connector you can connect five wires together. Easy-to-use levers. Suitable for all types of conductors, cross-sectional area max 4.0 mm2. Transparent body and protective strip.
- 5-pin, you can connect five wires together
- Maximum ambient temperature 85 °C
- 0.2 to 4.0 mm² for multi-core and single-core conductors
- Transparent plastic body
- Rated current 32 A
- Nominal voltage 450 V
- External dimensions 30 x 8 x 18 mm
Estimated delivery time: 2-7 business days.
