Spare parts

Professional / commercial washing machine drain valve rubber hose. This part releases water from the machine when the valve opens. Fits many Electrolux Professional, Wascator, Zanussi W365H, W375H, W385M, W3100, W3200, W3300 series models & valve 432250201. Check the fit table for your model.

Tumble dryer belt Optibelt-RB 487151143, 0E1270. 4 grooves, width 12 mm. Fits many Wascator, Wascomat, Electrolux Professional, Zanussi D200, DI200, TT200 tumble dryers. Check the fit table for your model.

Washing machine drain valve rubber hose. This part releases water from the machine when the valve opens. Fits many Electrolux Professional, Wascator, Zanussi FL, W100, W200, W300, WE series models and valve 472602000. Check the compatibility table for your model.

Professional washing machine water temperature probe with rubber grommet. NTC 3.8 KOHM. -10 -> +100°C. Replaces part 0W2255. Fits many Electrolux Professional- and Wascator-models. See list for compatible models.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional with electrical permits required by law. If an electronic component is installed by a person without electrician degree or permits the customer is responsible for any possible accidents / damage.

Commercial washing machine pneumatic drain valve 230V, 50/60 Hz. Fits many Wascator and Electrolux Professional appliances. See list for compatible models.

• Inlet connector 86 mm
• Outlet connector 76 mm
• Overflow pipe 44 mm
• Pneumatic tube connector 4 mm

The water heating resistance of the washing machine. There are three of these in the machine, sold individually. Replaces part 0W1W06. Suitable for e.g. Electrolux Wascator W3105H, W3105N, W3130M, W3130N.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial washing machine water drain solenoid valve. Normally open. Fits many Asko, Cylinda, Aga, Electrolux Wascator models. Replaces part 471921965.

• The outer diameter of the entrance is 50 mm
• The outer diameter of the outlet is 50 mm
• 230V 50-60Hz 20-17Amp
• Depend-O-Drain Made In USA
• The valve housing may be black or light brown

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial washing machine drain valve 24V, replaces Electrolux Professional part 0L2506. See list for compatible models.

• 24 VAC
• 50/60 Hz
• Water inlet 55 mm
• Water outlet 1,5" (~38 mm)
• Overflow pipe 35 mm

Commercial washing machine heating element 230V / 2200W for some Wascator- and Electrolux Professional-models. Length 340 mm, width 65 mm, flange 80×26 mm. See list for compatible models.