Coffee maker

Coffee machine circuit board 6.301.713.000. Original spare part for Bonamat Mondo 1, Mondo 2, Mondo 3 -models (TH10) from years 1996-2010. Replaces older versions (including installation guide).

Percolator coffee maker boiling heating element. Located in the center of bottom. Original spare part for Bartscher Regina 90 (ND100-15L, A190192), Regina Plus 90T (ND100-15L(B) A190196) models.

Opa El-rod percolator coffee maker sieve / filter. Steel. Fits for 4-6 liter models.

Sealing strip for the plastic top cover of the percolator coffee maker. Length 620 mm, Width 11 mm, thickness 1.5 mm, extends to cover. Original spare part for Bartscher Regina 90 models:

• Regina 90 (ND100-15L, A190192)
• Regina 90T (ND100-15L, A190196)

Percolator coffee maker temperature upkeeping heating element. Located in the edge of bottom, surrounding the boiling element. Original spare part for Bartscher PRO 40T, 60T, 100T, Regina 40 -models.

Percolator coffee maker top lid sealing strip. Length 234 mm, Width 11 mm, thickness 1.5 mm. Original spare part for Bartscher Regina 40 models:

• Regina Plus 40T (ND40-6L, A190146)
• Regina 40, 6.8L (A190142)
• Regina 40 ND6.8L(B model)

Coffee maker jug position green signal lamp. Lens outer diameter 15mm, attachment hole diameter 12,5 mm. 6,3 mm Abiko connectors. 230V T120°c. Original spare part for Technivorm Moccaking MK010.

coffee hose water tank rubber hose. Length 305 mm. Original spare part for Technivorm Moccaking models. Can also be shortened to 225 mm in length to fit MOCCASERVER MANUAL, MOCCASERVER AUTOFILL, MOCCASERVER - S, MOCCASTAR, MOCCASTAR - thermo, THERMOKING AUTOFILL, TK-KJS AUTOFILL.

Percolator coffee maker faucet. Original spare part for Bartscher PRO II 40T (A190148), PRO II 60T (A190167) and PRO II 100T (A190198).

• The diameter of the penetration is 14 mm
• Internal thread for attaching the display tube 15 mm

Note! older models use different tap: Perkolaattorin laskuhana PRO 40T / 60T / 100T

Percolator coffee maker water rising tube. Steel. Silicone seal in the bottom cup. Original spare part for Bartscher PRO II 40T (A190148) model.

The glass pot / carafe of the commercial restaurant coffee maker. Volume 1.7 liters. Hinged lid. Cover and handle in black plastic. Original spare part for Bravilor Bonamat Novo, Mondo and Matic series models. 7.170.602.101

Percolator coffee maker rising tube silicone seal. Located in the cup at the lower end of the metal riser tube. Original spare part for Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• Outer diameter 31 mm
• Thickness 2 mm

Percolator coffee maker overheating protection. Cut-off temperature 190 degrees. Manual confirmation button on the bottom. Original spare part for Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• KSD301-CR
• 15A250Vac 
• 190°C

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Percolator coffee maker overheating protection. Cut-off temperature 216 degrees. Replaces part E0139TL. Suitable for e.g. For Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• 250V, 10A
• 216°C

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Percolator coffee maker lid. Black plastic. The diameter of the sealing surface of the lid is 213 mm. Maximum diameter 237 mm. Original spare part for Bartscher Regina 40 6.8L A190142, Regina 40T A190146, Regina PLUS 40T A190149 and ND40-6L(B).

Selection switch for an oven, stove, coffee maker or other large household appliance E.G.O. 49.24215.520. Positions 0-3 (0-1-2-3). 16A / 230V, 10A / 400V. Suitable for e.g. El-Rod coffee makers (percolator coffee maker), Electrolux Zanussi pizza ovens, ND2/3 kebab grill and many other large kitchen appliances.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

The retaining nut and tightening screw located at the upper end of the glass display tube of the percolator coffee maker. Metal. Original Bartscher spare part for PRO40T, PRO60T, PRO100T models (ND40 / ND60 / ND100).

Coffee maker black plastic filter holder for many Bravilor Bonamat Novo models. See pictures for dimensions.

Coffee maker boiler heater 1710W / 230V, fits Bravilor Bonamat Mondo Twin- and Matic Twin- coffee machines. 

• 1710W / 230V
• Diameter 82 mm
• Length 105 mm
• Connectors Abiko 6,3 mm

Measuring spoon for dispensing coffee grounds in commercial coffee machines. The spoon holds approximately 40 grams of coffee. Spoon dimensions 160 x 55 mm. Brown plastic. Original spare part for Bravilor Bonamat coffee machines.

Steel milk jug / milk frother for coffee table, barista, restaurant, bar use. Capacity 350 ml. Polished surface, stainless steel. Dishwasher safe. Original DeLonghi product DLSC060.

Bravilor Bonamat coffee maker PTC heating element 230V, fits e.g. models B10. Original spare part, see list for compatible models.

• 90W, 100-240V
• Dimensions 75 x 48 x 11 mm
• Cable length 250 mm

Bunn-O-Matic coffee maker filter funnel. Black plastic. Original Bunn spare part, fits Bunn-O-Matic AXIOM CDBC, CWA, CWT, CWTF, STA, STF, STFA, VP, VPR, VPS series models.

• Outer diameter of the top 185 mm
• Height 95 mm