Other spares

Cooker hood / extractor knob kit. White. Original spare part for Upo models: E5022, E5029, E5031, E5042, E6022, E6029, E6031, E6042, E7022

Cooker hood / extractor noise absorber. Original spare part for many AEG, Electrolux EFP EFT, Elektro Helios SF, Husqvarna QC, Rosenlew RLT -series models.

Push button power switch. Mounting hole: 22 x 27 mm. Fits many cooker hoods and other appliances. Colour options: Clear, red, yellow, green.

A collar to be installed on top of the cooker hood, with plastic flaps that open when the cooker hood blows. When the fan is turned off, the flaps close and prevent outside air from entering the apartment, thus eliminating heat loss. mounting hole diameter 120 mm. Outer diameter of the pipe part 120 mm. Height 40 mm. Original spare part for many AEG, Electrolux EFP EFT, Husqvarna QC, Rosenlew RLT series models.

White plastic knob for cooker hoods. Original spare part for AEG 590D-W & Electrolux EFG643 -models. Diameter 40mm. Axle 6mm.

Cooker hood control circuit board assembly. Replaces parts 4055451126, 3918307012, 4055236444, 50277673005, 50286110007, 50289417003. Original spare part for many Electrolux EFT, Husqvarna QC, Rosenlew RLT -series models.

Savo cooker hood fitting ring 150mm pipe to 125mm exhaust pipe 03292631.

Cooker hood anti-freeze valve, cold protection valve. Prevents cold air from flowing in when the device is not in use. The metal flaps open when the fan is switched on and close automatically with spring force when the fan is switched off. To be installed from above on top of the cooker hood, between the cooker hood and the 125 mm air duct pipe (this part cannot be installed from below inside the cooker hood). Replaces parts 03292210, 02000749, 32922106, Candy Hoover 93958577.

Savo cooker hood air diffuser kit 133.0046.956. fits to 160mm tube. for 300mm wide frame cover.

Savo cooker hood main switch 06103891. Suitable for models: Kite/ Kuutio

Knob kit for home appliances, commercial appliances & other devices. Includes 5 white plastic knobs and 3 different spacers for every knob:

• Length 28 mm; for 6 and 8 mm axles, distance from knob surface 16 mm
• Length 14 mm; 6 mm axle, distance 2 mm
• Length 14 mm; 8 mm axle, distance 2 mm

Knob diameter 42 mm. Knob direction is fully adjustable.

Cooker hood / extractor lamp cover. Clear plastic. outer size 374 x 59 mm, for 369 x 54 mm sizer hole. Spare part for many Turboair & Electrolux models.

Cooker hood motor. This motor is turning counterclockwise. Original spare part for many AEG DF / CHDF, Electrolux EFP6400G -series models.

Cooker hood tube connector with air vent valve. You can connect your extractor to air output tubing using this part. The valve flaps stops the air flowing back. Original spare part for many Electrolux ETF500 EFT600 EFT60000, Elektro Helios SF, Rosenlew RLT -series models.

Electrolux cooker hood circuit board. Original spare part for many models.

Cooker hood noise guard. Original spare part for many Electrolux, AEG and Husqvarna cooker hoods.

Plastic holder for the grease filter plate under the cooker hood. This locking lever locks the grease filter support plate to the cooker hood. White plastic. Sold individually, there are two of these in the device. Maximum width 15.5 mm, total length 40 mm. Width at the locking spout 9 mm. Original spare part for Savo F-1005-W, F-1006-W, SP-2002, F-1105-W, F-1106-W, F-1105-S, F-1106-S -models.

Cooker hood / extractor glass panel left end holder. White plastic. Original spare part for many Turboair K700, K800 -series models.

Cooker hood / extractor air splitter. Vents output air back to your apartment. Original spare part for Savo C-51, C-52, C-55, C-60, C-63, C-64 -series models. 08088366, 80883663.

Wire between the cooker hood halogen light transformer and the circuit board. 004261639 + 004200800. For Savo Best I-55 and ASC models. Original spare part.

Condensate water collector to be installed in the extract air pipe of the cooker hood. The collector is installed on or in the immediate vicinity of the hood of the cooker hood. Condensation water flowing along the inner wall of the ventilation duct passes into the condensate collector before it can drain into the cooker hood and hob. The water that has accumulated in the tank of the condensate trap will evaporate by itself. Make sure that in addition to this part, your fan has a cold protection valve. NABER KDA 125/150.

• Suitable for pipe sizes 125 and 150 mm in internal diameter
• Total height 240 mm
• Water container volume 3.5 dl

Cooker hood / extractor cold air valve. prevents cold air to flow from cooker hood's output piping to your kitchen. Opens automatically when the cooker hood is turned on. Original spare part for Savo G-34, C-58, C-69, C-78, Noppa, I-60, I-63 -models. Inner diameter of the lower part 150 mm, total height of the collar 45 mm, outer diameter of the upper part 148 mm. Replaces parts Faber roblin 133.0056.646, 1330056646, 14CO006, 133.0258.023, 1330258023.

Connector kit. Needed when installing cooker hood circuit boards, example Savo V0413.

Includes 10 connectors and 10 sheets.

Size 2,80 x 0,50mm

Cooker hood speed control knob. Positions: 0, 1, 2, 3, 4. White plastic. Original spare part for Vallox -models: PTX, TTX, LTX, 70K