Other parts

Vacuum cleaner hose handle, chrome-plated. This model has openable vent on top to decrease suction power. Includes lock ring and threaded hose end collar. Nozzle connection end diameter: 32 mm. Suitable for: AEG-Electrolux Karcher Nilfisk Numatic, as well as most of the central vacuum cleaners, Beam, Aertecnica, Puzer, Pölypiika, Fresco, Allaway, Kaikkipois etc.

Compatible with product Vacuum cleaner telescopic tube 32 mm 58-98cm.

Alternative product Suction hose handle 32 mm, long

Vacuum cleaner hose extension connector. Fits for 38mm outer diameter hoses. Left handed threads.

Central vacuum cleaner control circuit board. A redesigned version with an automatic fuse, replacing the previous card model with a ceramic tube fuse. Original spare part for Puzer Oiva and Oiva 1400E.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Vacuum cleaner BigDirt ZE004 Separator pre-separator, ash / dirt unit. You can use this to vacuum fireplace ashes, car floor sand, liquids / wet materials, soil, glass shards, etc. using your vacuum cleaner with this collector. The vacuum cleaner hose is connected to the collector and the waste is sucked with the collector hose. The sucked waste settles to the bottom of the separator. However, never suck hot ashes. The collection tank holds 20 liters of solids or 5 liters of liquids. The tank is treated against corrosion and is easy to clean. The filter is made of polyester and has a high filtration level. The filter can be washed. Fits directly to all vacuum cleaners with a round 32-36 mm pipe connection as well as central vacuum cleaners and, with the nozzle adapter, also to vacuum cleaner models with an oval Aeropro connection.

Central vacuum cleaner fuse. 3SB 7A 250V. Original Allaway spare part.

Allaway central vacuum cleaner motor carbon brushes. Alternative part, replaces parts 2311480, 10123V, 17X0-XA. Fits Motors 117275-07, 116355-00, 10013V. Allaway CV1350, CV1750, KP1400, KP1500, AW1700, V-1700-AA-02, V-1700-AA-12, Fresco Futura 1300, Pölypiika 1300. Note! not suitable for B2-1303B motor!

• Carbon thickness 6mm
• Carbon height 11mm
• Carbon length as new 28mm
• Housing lenght 38mm

Central vacuum cleaner telescopic tube top end pipe. Original spare part for Allaway Premium 81051 -telescopic pipe.

10691CS

Handle part 2G Alliance LV of the suction hose of the central vacuum cleaner. Only suitable for Beam Alliance series machines. Power adjustment and start button on the handle. Oval-shaped AeroPro pipe connection to the telescopic arm. The handle includes fastening clips (kiinnitysklipsit). Original Beam spare part.

Central vacuum cleaner on/off switch and electronics, located on the central unit. Original spare part.

Central vacuum cleaner circuit board assembly. Including LCD-display. Original spare part for Puzer Aino -models.

• 220-240V ac 50/60Hz 10A

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.