Print

Nilfisk vacuum cleaner spare parts


Display per page
Sort by
1 - 50 of 57 results
Product no.: 1406880500

Vacuum cleaner cylinder main filter. Pleated filter with sheet metal base and rubber rim. Replaces filters 1406880003, 1406880500. Fits Nilfisk Terrier UZ934.

  • Filter height 128 mm
  • Filter outer diameter 190 mm
  • Filter inner diameter 161 mm
Product no.: 1406879500

terrier filter. 5pcs. 100x150mm

Product no.: 1401515500

Vacuum cleaner filter. Located inside the top lid. Fits: Nilfisk / Electrolux GD930, UZ930, Volta UZ930, Electrolux UZ920 - UZ930S, UZ932, Euroclean, Nilfisk GD920 - 930S Panther, EVA, Volta Proffs

  • thickness 35mm
  • diameter 300mm

Fine filter also available: Nilfisk UZ 930 / GD 930 imurin lisäsuodatin (300mm) 5 kpl

Product no.: 1403260500

Micro fiber filter for vacuum cleaner. Fits to the vacuum cleaner top cover with thicker superlon filter. including 5 pcs of filters. Diameter 300mm. 1403260001, 1403260506. Original filters for Nilfisk GD930 Panther, Volta / Electrolux UZ930

Product no.: 9001969642

ES100 dust bag kit. Contains 10 microfiber dust bags. Better filtering ability than paper bag, up to 50% longer service life. Guarantees the best suction power. Cardboard width 95 mm. Hole size 55 mm. Bag length 740 mm, height 165 mm. Volume approx. 15 liters. Suitable for many professional vacuum cleaners:

  • Electrolux Z930, Z940, Z950, Pro Z951, UZ173, UZ872, UZ920, UZ921, UZ922, UZ923/S, UZ925, UZ930/S, UZ945, DP9000, P9000
  • Volta UZ173, UZ920, UZ930, UZ923/S, UZ925, UZ93, UZ945
  • Nilfisk GD930 Panther, DP9000, GD936, GD940, GD950
  • EuroClean HZ173, UZ920, UZ930, UZ930S, UZ931, UZ935, UZ945
  • Kärcher T201, T251, T201C
Product no.: BXL-50568/P

Vacuum cleaner dust bags. Including 10 pcs. Fits:

  • Electrolux / Nilfisk: UZ872, UZ932, UZ934 pro, Terrier
  • Volta UZ872, UZ932, PPT20
Product no.: 5808

Vacuum cleaner suction hose. Handle end diameter 32 mm. machine head max diameter 54,5 mm. Fits:

  • Electrolux / Nilfisk UZ872, UZ932, UZ934 Terrier, GD320, GWD320, GWD335
  • Volta UZ872, UZ832

 

Product no.: 68174

ELECTROLUX UZ 872, 930S, UZ 932, UZ 934pro/X, 940S2, Terrier, Neptune, Apollo
NILFISK GD932, 934, PPT 20, GD930
VOLTA UZ 872, UZ 932, UZ 934pro, Terrier

2pcs dust bags

Product no.: W7-87077

Vacuum cleaner suction hose. Three claw attachment to the cleaner. 32 mm handle end diameter for telescopic tube. Attachment point outer diameter 43 mm. Hose length 185 cm + handle. Original Nilfisk spare part.

  • Electrolux Euroclean / Volta / Nilfisk Panther GD930, UZ930
  • LUX / Electrolux D710, D325, D310, D730, D728, D740, D748, D750, D768, D770, D775, D780, D790, D795
  • Electrolux ZE020, 9000846858, 115719049, 116435017, 1081601336
  • Nilfisk 1402782500
Product no.: 1401535510

Vacuum cleaner motor filters. Original spare part for: Nilfisk GD930 ja Electrolux / Volta UZ 930, Electrolux UZ920 - UZ930S, 930, Euroclean, Nilfisk GD 920 - 930S Panther, EVA, Volta Proffs

  • Size: ø 110mm x 9mm
  • Including 3 pcs
Product no.: 1406744500

Three plastic dustbag holders for Nilfisk UZ934, UZ872, SL011 & UZ932 vacuum cleaners. W 120mm, H 105mm.

Product no.: W7-50554/HQ

Paper dust bags for professional vacuum cleaners. pack of 10 dust bags. Suitable for:

  • Electrolux Z930, Z940, Z950, Pro Z951, UZ173, UZ872, UZ920, UZ921, UZ922, UZ923/S, UZ925, UZ930/S, UZ945, DP9000, P9000
  • Volta UZ173, UZ920, UZ930, UZ923/S, UZ925, UZ93, UZ945
  • Nilfisk GD930 Panther, GD930S, DP9000, GD936, GD940, GD950
  • EuroClean HZ173, UZ920, UZ930, UZ930S, UZ931, UZ935, UZ945
  • Kärcher T201, T251, T201C
Product no.: 1407033500

Vacuum cleaner main power switch. Original spare part for many Electrolux UZ930, U200, Z800, D700, Z300, Z400, Z3000, LUX D700, Nilfisk GD930 panther, Volta U2000 -series vacuum cleaners.

Product no.: 6821

Vacuum cleaner dust bags. Including 4 pieces of microfiber dust bags. Fits to Nilfisk: GA70, GM80, GM90, GX80, GX90, GS80, GS84, GS90, GS90C, G90/A, 816200, GSD

(DUBG222NIL4) 

Product no.: 6870

NILFISK GM -sarja
GM 200 --> 599
GMD 400, 410, 420, 430
KING 510, 520, 530, 540
Arnoldi, Great Dane, Home
Hygienic, Silverjubileum, X150, 300
Extreme 150-,200-,300-sarja
Power Allergy

Product no.: W7-88994

Power cable for vacuum cleaners. Lenght 15 meters. Black. 2 x 1,0 mm2. Round outer sole with 6,5mm diameter. Euro- plug. VCPC110CBK150.

Product no.: 39 6010-14

Vacuum cleaner motor for Nilfisk GD 930 panther & Electrolux EuroClean UZ 930 -models. 1000W 240V. Alternative part. Attachment with one spring on the center. Total height 180mm, turbine chamber height 68mm, bottom diameter 131mm, max diameter 145mm.

Product no.: 1407902520

Professional vacuum cleaner motor for many Nilfisk / Electrolux Panther GD930, UZ930S, -models. Attachment with two springs on the top of the motor. Motor height c. 165mm, bottom diameter c. 143mm. 1407902520

Product no.: 1407902525

Vacuum cleaner motor MKM3552. This model is attached with two spings on the top.  Including cables, springs & noise filter capasitor. 240V. Replaces motor 1407902520. Original spare part for many Nilfisk Panther GD930, GD930S, UZ930S2, GM110, GM130, UZ930, UZ930S, UZ934, GD930S2, Electrolux Euro Clean UZ930, UZ930S, DP9000 -models.

Product no.: 1407800500

Vacuum cleaner handle with suction hose connection. Original spare part for many Nilfisk VP930, GD930 Panther, Electrolux UZ930 -series models.

Product no.: 49594

Vacuum cleaner suction motor. Domel MKM7778/8. 1200W 220-240V AC. Fits for many Nilfisk Attix -series models.

Product no.: M417207

Vacuum cleaner filter cartridge. Diameter 185 mm, height 140 mm. Replace filters  63990, 11753, 302000490, 107402338 (orange edged). Fits many Makita, Nilfisk, Protool models.

Product no.: 82222900

Vacuum cleaner dust bags. Including five paper bags. Fits for Nilfisk VP100, VP300, GD710, GD910, GD1010, GD2000, GSN1010, HDS2000 -models.

Product no.: 1939.3119

Black rocker switch with rubber cover. Excellent switch for dirty and wet objects. Protected by a rubber edge throughout, protection class IP65 from the outside. Black frame. The ON-OFF-ON positions (1-0-2) remain on. Suitable for many vacuum cleaners, household appliances, industrial machines and other electrical equipment. Replaces part Nilfisk Aero / Flex 107409135.

Product no.: 1407832500
Product no.: 31001065

Vacuum cleaner wheels 2pcs. Azle diameter 8 mm, axle length 25 mm. Wheel diameter 50 mm. Original spare part for Nilfisk Multi 2 -series models.

Product no.: 1406422500

Vacuum cleaner front wheels 2pcs. Axle diameter 10 mm, axle length 36 mm. Wheel diameter 50,5 mm. Replaces part 1406422000. Original spare part for Nilfisk GD320, GD934, GWD320, UZ934, VP300HEPA -models.

Product no.: 433960

Vacuum cleaner suction hose 1.8 m. Replaces part 12018001. Fits many Nilfisk CDB, CDF, GD series models.

Product no.: 1405496510

Vacuum cleaner main power switch. Black color. Original spare part for Nilfisk / Euro Clean UZ934, UZ964 models.

  • Mounting hole size 22 x 19 mm
  • External dimensions of the frame 21 x 24 mm
  • Thickness 20 mm
  • Connectors 4 x 4.8 mm Abiko

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Product no.: 7838780

Power switch with orange light. 3628-251.22 INTERBÄR. Replaces e.g. switch Nilfisk 1405496510. Suitable as a main power switch for many devices.

  • Mounting hole size 22 x 19 mm
  • External dimensions of the frame 24 x 21 mm
  • Thickness 23 mm
  • 4 x 4.8 mm Abiko connectors
  • 10A 250VAC

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Product no.: 31001058

Plastic fasteners / locking clamps for the vacuum cleaner motor unit and the dust container below it. Original spare part for a few Nilfisk Multi II series models:

  • MULTI II 22 INOX 18451551 NILFISK
  • MULTI II 30 T 18451556 NILFISK
  • MULTI II 30 T INOX VSC 18451553 NILFISK
  • MULTI II 50 18451554 NILFISK
Product no.: 11641000

Vacuum cleaner microfiber filters. Includes two similar filters on the vacuum cleaner cover. Maximum dimensions 130 x 178 mm, thickness 1.5 mm. Replaces filter 11693700. Original spare part for many Nilfisk GS80, GM80, GS81, GS90, GM90 series models.

Product no.: 107417193

Vacuum cleaner suction hose. Length 4 meters. Original spare part for a few Nilfisk Multi II and Buddy II series models. Check the fit table for your model.

Product no.: 107417195

Vacuum cleaner microfiber dust bags. The package contains 4 pieces of 22 / 30l Fleece dust bags. Original spare part for a few Nilfisk Multi II series models. Check the fit table for your model.

Product no.: 1408434500

Vacuum cleaner power cord. Cable length 15 m. Short (49,5mm) angle plug C17 for vacuum cleaner. Ungrounded euro schuko plug. Red color. Replaces part Kärcher 6.648-172.0. Fits many Kärcher, Nilfisk GD2000, HDS2000, Taski Vento, Aero, Wetrok Durovac, Monovac models.

Product no.: D54314

Vacuum cleaner suction hose. Accessory version, fits many Electrolux Euroclean / Volta / Nilfisk Panther models with three-pin suction cup holder. Telescopic tube connection 32 mm. The outer diameter of the vacuum cleaner connection head is 43 mm. Hose length 180 cm + handle.

  • Electrolux Euroclean / Volta / Nilfisk Panther GD930, UZ930, VP930
  • LUX / Electrolux D710, D325, D310, D730, D728, D740, D748, D750, D768, D770, D775, D780, D790, D795
  • Electrolux ZE020, 9000846858, 115719049, 116435017
  • Nilfisk 1402782500
Product no.: 9099672000

Floor scrubber / dryer brush holder, original spare part for model SC351.

Product no.: 1406872500

Vacuum cleaner carrying handle. Does not include mounting screws (use old screws). Black plastic. Original spare part for Nilfisk Terrier UZ934.

Product no.: 22142500

Locking levers connect the vacuum cleaner motor and dust container. Includes two clips and mounting screws. Original spare part for Nilfisk GS80 and GM80 models.

Product no.: 1471428500

Vacuum cleaner motor V1J-PH20-009. Original spare part for some Nilfisk GD101, GD111, Saltix 10, VP300 series models. Check the compatibility with your model in the compatibility table with the product number found on the model label of the vacuum cleaner.

  • 220-240V ac 900W
  • 1471428000 SIP CINDERSON MOTOR
Product no.: 107402675

Vacuum cleaner motor V1J-PH22. 230-240V ac 1200W. 107403560 Sip Cinderson Motor. Original spare part for some Nilfisk VP300, GD910, saltix series models. Check the compatibility with your model in the compatibility table and with the data of the old motor.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 302002042

Wet & Dry vacuum cleaner Hepa filter attachment plate. Black plastic. A thread in the middle to tighten the filter in place. Original spare part for many Nilfisk Alto Aero 20, 25 and Multi 20, 30 series models. Check the fit for your model in the fit table.

Product no.: 1403846500

Vacuum cleaner suction hose connector to the vacuum cleaner. Three locking nails for the connection point of the vacuum cleaner, rubber seal. Connection head diameter 43 mm. Original spare part for many Nilfisk GD930 Panther, VP930, Electrolux Euroclean UZ930, Lux D700 series vacuum cleaners.

Product no.: 6504

Machine head to vacuum cleaner suction hose. This hose connector locks the hose to the vacuum cleaner. Suitable for vacuum cleaners where the hose is attached using the three fixing lugs on the machine head. Fastening point diameter 43 mm. Rubber seal. Left-handed thread for suction hoses with an outer diameter of 38-41 mm. Suitable for many Nilfisk GD930 Panther, VP930, Electrolux Euroclean UZ930, Lux D700 series vacuum cleaners.

Product no.: 107416571

Vacuum cleaner suction hose. Does not include the handle part. Original spare part for many Nilfisk Select series models.

  • Length 2 m
  • Hose diameter 45 mm
  • The diameter of the connecting device is 39.5 mm
  • Handle connection diameter 45 mm
Product no.: 107414062

Vacuum cleaner suction hose handle. Black plastic. Original spare part for many Nilfisk Select series models. Check the suitability for your model in the suitability table with the information on the model label of the vacuum cleaner.

Product no.: 107409976

Vacuum cleaner suction hose D32X3500. Replaces the previous hose 302000473. Original spare part for many Nilfisk Aero, Attix, Maxxi II series models. Check the suitability for your model in the suitability table with the information on the model label of the vacuum cleaner.

  • Hose connection to the vacuum cleaner, outer diameter 57 mm
  • Hose connection to the vacuum cleaner, inner diameter 54 mm
  • The outer diameter of the handle tube is 34 mm
  • Hose outer diameter 40 mm
  • Hose length 3.5 m
  • Total length with handle 3.95 m
Product no.: 1470746010

Dust bags for industrial vacuum cleaners / vacuum cleaners intended for professional use. 3 synthetic microfibre bags in the package. Replaces parts 1407633010, 1407695000. Original spare part for many Nilfisk GWD350, GWD350-2, GWD375, GWD375-2, MAXXI WD7, WD150, WD175, WD245, WD245F, WD250, WD260, WD275 series models. Check the fit for your model in the fit table.

Product no.: 107419590

Dust bag packaging for an industrial vacuum cleaner. Contains five microfiber dust bags. Fits some Nilfisk Aero 21, 26, 31, VL200 vacuum cleaners. Check the fit for your model in the fit table.

Product no.: FL901-GF

Dust bags for contsruction vacuum cleaners / large vacuum cleaners. The package includes five microfiber dust bags. Fits many Electrolux, Kärcher, Nilfisk Aero models. Check the fit for your model in the fit table.

1 - 50 of 57 results