Water valves

Dishwasher water inlet valve Bitron type 902. Located at the end of the dishwasher's inlet water hose. If the machine does not take water, this part may be damaged. This often happens if the tap is forgotten to open when the machine is started. Original Bosch / Siemens AQUASTOP valve, you can distinguish the model from the shape of the protective case or its marking Type 902. Installation instructions included, compression connectors for wires and a shrink sleeve over the connections. 00263789, 00263642. Bitron type 902.

Water inlet valve with 12mm output. 3/4" input. Output is in 90 degree angle. Coil 220-240V 50Hz. Fits many washing machines & dishwashers.

Washing machine or dishwasher water valve with two valves. Seen from the input, the 12 mm output connectors go straight back. Input connector 3/4 "standard. Coil operating voltage 230V AC. 6.3 mm Abiko flat connectors. Replaces LG spare part 5220FR1251A. Bitron 2483026

Magnetic fill solenoid valve for AEG, Electrolux & Zanussi dishwashers. includes frood protection valve. 00207045

Dishwasher inlet water valve. A single-acting valve with a water flow rate of 3.75 liters per minute (these machines draw water based on time, so this valve cannot be replaced with the valve of the universal model). Original spare part for many Asko, Upo and Cylinda dishwashers from the 70s-90s. Replace parts Asko Atag 8057507, 108057507 8072120, 018072120,108072120. Check the suitability for your model in the suitability table with the information on the model label of the machine.

Dishwasher water inlet valve. Inlet 3/4", outlet 12mm. This electric inlet valve sits at the back of your dishwasher, where the water supply enters. It controls the flow of water into the machine. If it is faulty your dishwasher may be over-filling or not filling at all. Original spare part for many AEG Favorit, Electrolux ESF ESL ESI, Elektro Helios DI, Husqvarna QB, Ikea RDW Rengora Hjalpsam Skinande, Rosenlew RW, Zanussi ZDF ZDS ZDT DA DE ZDI -series models. Please ensure the fit with PROD/PNC number.

Dishwasher water inlet valve. Two magnetic valves. Original spare part for many Electrolux ESL ESF, Elektro Helios DI, Rosenlew RW, Zanussi DE ZDT -models. Please ensure the fit with PROD/PNC number.

Dishwasher water intake valve. Original spare part for many AEG Favorit, Electrolux ESF, Elektro Helios DI, IKEA, Rosenlew RW, Zanussi ZDS ZDF -series models. Please ensure the fit with PROD/PNC number.

Water valve for washing machines, dishwashers & other devices.

• 3-way  180°
• in: 3/4"
• out: 11,5 mm
• 6,3mm Abiko
• 240V

Dishwasher water inlet hose with AQUASTOP -water valve. Original spare part for many Aeg Favorit, Electrolux ESF ESI GA ESL, Husqvarna QB, Ikea -series models.

The magnetic solenoid valve / water intake valve of a washing machine, dishwasher, commercial appliance or other machine. Suitable for e.g. for many Electrolux ESF, AEG Lavamat, Favorit, Husqvarna Cardinal, Zanussi, Rosenlew, Elektro Helios, etc. machines. Also suitable as a replacement for Electrolux Professional 049626, 0L3440 valves (connectors of the wires must be changed). 284942

• Inlet connector 3/4" (thread on top 26.5 mm)
• Output connector 14.5 mm
• 6.3 mm Abiko flat connectors
• 220-240V ac 50/60Hz 8VA
• The outlet is at a 90° angle to the inlet

Dishwasher water inlet valve. Two coils. Inlet 3/4", outlet 12mm 90 degree angle. Including o-ring seal & attachment part. Original spare part for many Asko d5000, DWC, Cylinda DM, Gorenje GDV -series models.

Valve-Outlet For Heat Exchanger, a solenoid valve in the side chamber of the dishwasher. 280-340 V DC. A protective film to be glued next to the valve is included to protect the valve from rupture again. If error code E19 flashes on the machine's screen, this part may be at fault (of course, the error code can also be caused by something else). Replaces part 00631199. Original spare part for many Bosch Siemens models. Check the fit table for your model.

Dishwasher water inlet valve. Replaces parts Haier 49055396, 0530019426, Vestel 32016053, 60329, 434165, 0530019426, 530019426. Fits for many Upo D454, D60, D62, D65D, D65DS -series models.

Dishwasher water solenoid valve 230V. The machine takes water with this part. Inlet 3/4" and outlet are at a 90 degree angle to each other. Replaces parts 273176, 8801375, 428899. Original spare part for many Asko, Gorenje, Upo models. Check the suitability for your model in the compatibility table with the model information on the edge of the machine door.

Dishwasher water valve. With this solenoid valve, the dishwasher takes in water. Replace parts 481228128462, C00311288. Fits many Ikea, Whirlpool ADG, ADP, WP series models. Check the fit table for your model.

Dishwasher inlet hose and water valve 230V. Length 2 meters. Original spare part for many Bosch / Siemens models. Check the fit table for your model.

Alternative version W502691.

Dishwasher Aquastop filling water hose with 230V water valve. Length 170 cm. If the machine does not take in water, this part may be broken. Original spare part for many Asko, Gorenje, Cylinda, Upo models. Check the fit table for your model.

Dishwasher filling water hose with Aquastop water safety system and solenoid valve. 220-240V ac. Manufactured by Bitron. Alternative manufacturer's part, replaces Miele hoses 5016970, 5016971, 5168031, 5168032, 5168033, 5168034, 5168035. Fits many Miele G7800 series models. Check the fit table for your model.

Dishwasher water inlet valve / solenoid valve. Includes seal between valve and side chamber and valve mounting loop. Original spare part for many Asko models. Check the fit table for your model.

Dishwasher inlet water hose with water valve and Aquastop valve. Manufacturer Bitron. Fits many Bosch SRI, SRS, SRU, SRV, Siemens SF series models. Check the suitability for your model in the suitability table with the E-number etched on the machine's door.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Dishwasher water valve. Two magnetic valves. Replaces part 481227128558.

Dishwasher magnetic water valve 230V, 3,75 L/min, two coils. Original spare part, replaces part 8072122. See list for compatible models.

Water valve coil. Suitable for T&P and Bitron valves with a coil hole size of 9 mm.

• Operating voltage 24V ac 50/60Hz
• Total height 31 mm
• Hole for valve 9 mm
• 6.3 mm flat terminals

A water valve water flow restrictor that is placed inside the connection pipe on the output side of the solenoid valve. Suitable for water intake valves with an outlet internal diameter of 8 mm, e.g. Bitron, T&P.

• Flow rate 3 liters per minute (± 25%)
• Green
• External diameter 8 mm
• Install the rubber part on the valve first (see picture)