Accessories

Power module for vacuum cleaner. Located on the side of the vacuum cleaner. Original spare part for many AEG Electrolux Ultra One -models.

The circuit board located on top of the vacuum cleaner. The power switch and power control switches are located on this card. In addition to this card, the vacuum cleaner has a power PCB on the side, which is more susceptible to damage than this card. Original spare part for many AEG Electrolux Ultra One models. Check the compatibility with your model in the compatibility table with the PROD/PNC number of the model sticker found on the bottom of the vacuum cleaner.

Floor tool brush for handheld vacuum cleaner. Original spare part for many AEG Electrolux ErgoRapido AG, ZB, ER -vacuum cleaners.

Vacuum cleaner dust chamber lid opening handle / lock. Dark plastic. Replaces older light grey / silver colored version. Original spare part for many AEG ACX AAM, Electrolux ZCX ZAM, Volta U6400 U6600 -series models.

Vacuum cleaner motor carbon brushes. Fits many Ametek motors.

• Carbon size 6.3 x 11 mm
• The length of the carbon is 27.5 mm
• Plastic case length 42 mm
• The width of the plastic case is 12.5 mm
• Plastic case height 16 mm
• Mounting hole distance 20 mm
• Electrical connector 6.3 mm Abiko

Handheld vacuum cleaner floor tool bigger wheel. Original spare part for many AEG Electrolux  Ergo Rapido AG8, AG9, ZB27, ZB28, ZB29 -series models.

Machine head to vacuum cleaner suction hose. This hose connector locks the hose to the vacuum cleaner. Suitable for vacuum cleaners where the hose is attached using the three fixing lugs on the machine head. Fastening point diameter 43 mm. Rubber seal. Left-handed thread for suction hoses with an outer diameter of 38-41 mm. Suitable for many Nilfisk GD930 Panther, VP930, Electrolux Euroclean UZ930, Lux D700 series vacuum cleaners.

Vacuum cleaner dust chamber lock right spring, original spare part. See list for compatible models.

Left spring: 1180241018 AEG / Electrolux vacuum cleaner dust chamber lock spring, left

Seal ring for vacuum cleaner telescopic tube & hose handle. original spare part for many Electrolux UltraActive, UltraSilencer, UltraPerformer & ultraOne -models.

Vacuum cleaner BigDirt ZE004 Separator pre-separator, ash / dirt unit. You can use this to vacuum fireplace ashes, car floor sand, liquids / wet materials, soil, glass shards, etc. using your vacuum cleaner with this collector. The vacuum cleaner hose is connected to the collector and the waste is sucked with the collector hose. The sucked waste settles to the bottom of the separator. However, never suck hot ashes. The collection tank holds 20 liters of solids or 5 liters of liquids. The tank is treated against corrosion and is easy to clean. The filter is made of polyester and has a high filtration level. The filter can be washed. Fits directly to all vacuum cleaners with a round 32-36 mm pipe connection as well as central vacuum cleaners and, with the nozzle adapter, also to vacuum cleaner models with an oval Aeropro connection.

Bagless vacuum cleaner dust container with filters included. Original spare part for many Ultra Active models.

Electrolux vacuum cleaner dust bag holder. Original spare part for few Volta, Zanussi and Electrolux models.

Vacuum cleaner Sumo turbo floor tool motor cogged belt 60S2M128. Original spare part for many Electrolux Ultra One, Ultra Active, Ultra Captic, Ultra Performer, Ultra Silencer -model's turbo floor nozzle.

Vacuum cleaner multi tool holder. Original spare part for many Electrolux Ultra Silencer, Ultra Active, Ultra Performer, Ultra captic -models with oval tube.

Vacuum cleaner fine filter plastic casing. Located in the bottom of the vacuum cleaner. Original spare part for many Electrolux Ultra Captic -series models.

Handheld vacuum cleaner brush roll for many AEG AG & Electrolux ZB Ergo Rapido -models.

Handheld vacuum cleaner charger power supply. Charges 25,2V Lithium battery packs. Supply output 35V 500mA. Original spare part for many AEG AG5000 & Electrolux ZB5000 -series models. Replaces part 1183391091.

• UltraPower Plus SIL Switching adapter
• MODEL NO: SSC-18P EU
• Input: 100-240V AC
• Output: 35V DC 500mA

Handheld vacuum cleaner motor to brush chassis part with drive wheel. Original spare part for many Electrolux Ergo Rapido ZB2800, AG800, ERGO -series models.

Fits: 32-35 mm

s-fresh sachets are suitable for all bagged vacuum cleaners and are very easy to use: simply open the sachet, pour the grains on the floor and vacuum them up. Once lodged in the bag, they spread a delicate but distinctly clean floral scent throughout your home every time you vacuum.

Central vacuum cleaner suction hose holder. Keep your hose stored to a closet with this holder.

• Hose space 9,5 cm x 11 cm
• Total width 17 cm

LG vacuum cleaner filter holder. Original LG spare part for:

• V-CC182HEU.*    V-CC182HEU.AXRQESW
• V-CC182HTQR.*    V-CC182HEQ.AXRQLFS
• V-CC183HEW.*    V-CC182HEU.ARNQESW

Vacuum cleaner motor carbon brushes. The Abiko connector of the cable is installed between the carbon brass tube and the plastic part. Accessory manufacturer's carbon, replaces the original carbon 2830480. Fits many Miele S125-444i series models. Check the fit table for your model.

• Brush L 27 mm, W 6 mm, H 11 mm.
• Changing guide: Allaway, Beam, Miele imurin moottorin hiilten vaihto

Robot vacuum cleaner front rotating wheel with base & vertical axle. Original Samsung spare part.