Filling / Inlet Hoses

Home appliance water inlet hose for cold water. Suits for washing machines.

• Connectors: 3/4" straight and 3/4" corner (thread c. 25mm)
• Length: 150cm

00110301

Washing machine water inlet hose for cold water.

• Length 350 cm
• ¾" straight (thread c. 25mm)
• ¾" corner (thread c. 25mm)

3/4" seal with sieve for washing machine or dishwasher inlet hose. Seals outer diameter 24,4mm, inner diameter 17,7mm.

1/2" straight and 3/4" corner
Length: 4m

Washing machine inlet water Y-divider. You can attach two machines into one inlet tap with this part. Connections: 2 x 3/4 "outer, 1 x 3/4 "inner.

Washing machine / dishwasher water inlet hose. Length 3.0 meters. Durable nylon coating.

Nailon hose.
1/2 inch end straight and 3/4 inch end corner
Lenght: 2.5m

Washing machine / dishwasher water inlet hose extension 50cm. 3/4" (c. 26mm) connections, male - female.

Dishwasher / washing machine water inlet hose seal. Diameter 19mm. 333387

Washing machine / dishwasher water inlet hose with Aquastop -valve. 3/4" attachments. max 90°C. 0,2-10 bar. Lenght 2500mm.

Washing machine, dishwasher or other appliance inlet water flow regulator and safety valve. This valve allows you to adjust the water flow to suit. The device is installed between the tap and the water inlet hose to the washing machine. adjustable 2-30l / min. Laundry Machine correct position is 8 (approx. 22l / min), the dishwasher 4 (approx. 12l / min). Built-in non-return valve. Comes with installation instructions in English, and tool for adjusting the flow rate. Manufacturer Eltek, Italy. 100041. 3525024

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 9mm, outer diameter 18mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 12,5mm, outer diameter 22mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 200cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Water inlet hose 250cm for home appliances & commercial appliances. You can connect this hose to hot or cold water, max 90°C. Hose inner diameter 14,5mm, outer diameter 26mm. Stainless steel braided outsole. Metal ends 3/4" straight & 3/4" corner with metal nuts. Gaskets included.

Washing machine / dishwasher water inlet hose with Aquastop -valve. 3/4" attachments. max 90°C. 0,2-10 bar. Lenght 2500mm.

Washing machine / dishwasher water ilnet hose rubber gasket. Outer diameter 23mm, inner diameter 12mm. Thickness 2mm.

Washing machine inlet water filter ELTEK 10.0885.80. Installation between tap & inlet hose. Filter mesh hole size 0,4mm. Prevents alrger particles to enter the machine. The sieve part also has a magnet collecting metal fragments and other magnetic particles from the water. Attachments 3/4". Easy to open & clean.

Washing machine water inlet hose extender hose. Durable steel woven hose with metallic connectors.

• L 50cm
• Attachments 3/4" straight outer thread - 3/4" straight inner thread
• Pressure max 90 bar

Faucet connection adapter for connecting the filling water hose of a washing machine or dishwasher. Included between the adapter and the tap fitting-half inch rubber seal. If your inlet faucet connection is 1/2 "(tap thread measured from the top approx. 21 mm) and your washing machine water hose connection is 3/4" (hose connection thread measured from the inside approx. 25 mm) you can adapt to the hose connection with this adapter. The supplied rubber seal seals the adapter to the faucet at the ends, i.e. between the end of the threaded part of the faucet and the flange inside the adapter. Manufactured by Electrolux.

Washing machine inlet hose, original spare part. See list for compatible models!

Washing machine water filling hose. Outer sock made of durable stainless steel braid. Metal connection heads, 3/4 "connections. Length 150 cm. Replaces hose Miele 7010550.

Washing machine water filling hose. outer sock made of durable stainless steel braid. Metal connection heads, 3/4 "connections. Length 350 cm.

Washing machine filling hose. Peel made of durable stainless steel braid. Metal connection heads, 1/2 "straight, 3/4" angle. Length 150 cm.