Print

Other parts and accessories

Other parts and accessories

Display per page
Sort by
1 - 50 of 54 results
Product no.: 52063

Hot plate under the jug for Moccamaster coffee makers. Original spare part for models K741, KB741, K740, 851

Product no.: 52064

Coffee maker metallic plate under the jug. Black painted metal (the chrome part's production has ended). Original spare part for Moccamaster: H741, K741, K741H, K742, K742H, K743, K743AO, K743H, K942, KB741, KB741M, KB741X, KB744H, KB952, KBG741, KBG741AO, KBG741G, KBG741H, KBG741R, KBG744, KBG962AO, KBGC972AO, KBGC982, KBGC982AO

Product no.: 52062

Moccamaster heating plate for models K741, KB7444 and 851. Brown color. Original spare part.

Product no.: 52154

Coffee maker chromed hot plate. Original spare part for Technivorm Moccamaster CD (clement design), CD AO, KBG40, KBGC40 -models. Heating element not included. Threaded bolt underneath.

Product no.: 43500

Moccamaster coffee maker boiling element heat fuse. Fits to older moccamaster models with old heating element (without spiral): K741A-743A, 851, 862, KB741-744

Product no.: 51030

Coffee maker heating element top copper ring. Located inside the rubber gasket. Diameter 12mm, from the end 15mm. Height 11mm. Original spare part for all Technivorm Moccamaster models.

Product no.: 12235

Technivorm Moccamaster coffee maker water floater. Located in the water container's bottom. Broken float stops the heating element's function. Original spare part for all Moccamaster models: K741-862, KB741-744, KBT, KBT8K, GCSG/B, CD

Product no.: 41216

Coffee jug heating element for Moccamaster K741, H741, K743, K742, KB742, K851, KB851 models with only one switch in the coffee maker. Aluminium part length 40mm, width 36mm. Two wires. If your coffee is too cold, this part is probably broken.

Product no.: 45163

Coffee maker water heating element / Boiling element. Located in the coffee machine body. Spiral design, also replaces the previous smooth-sided wire-type heater. element tube length 141 mm. 1310W 240V AC (1200W 230V AC). Includes thermostat & overheat protection. Total length 157 mm, cylinder length 141 mm, diameter at spiral tube 47 mm. Original spare part for Technivorm Moccamaster K741-862, KB741 / X / M, KBG741R / H / G series models.

Product no.: 41201

Coffee jug heating element for Moccamaster GCS, GCSG/B, K741, KB741 models with heating power selector switch (two switches in the coffee maker). Aluminium part length 76mm, width 36mm. Three wires.

Not suitable for Auto-Off -models. They use different element: Moccamaster levyn vastus Auto-Off

Product no.: 43340

Moccamaster coffee machine micro switch. Located under the water container, under the float. This switch cuts off the operation of the boiling element when the water tank runs out. This part can be white, black, brown. 11A 250VAC. Original spare part for almost all Moccamasters, e.g. For K741-862, GCSG/B, KB741/X/M/R/H/G,KBT, KBT8K, CD models.

Product no.: 53022

This tube leads water over to the coffee filter holder. Original Moccamaster spare part. K741-862, KB741-851, KBG741, KBT, KBT8K, CD

Product no.: 60010

Moccamaster coffee maker glass tube seal. This part fits to both ends of the glass tube. The spout is attached to this on top of the water tank. A similar rubber sleeve is also at the top of the boiler / heating element. Fits all Moccamaster coffee makers. May be different in color, as in older machines this part was black rubber, now light silicone.

Product no.: 63011
Product no.: Clean Drop

Coffee maker cleaner, can be used on Moccamaster. Includes 5 pcs of cleaning bags.

Product no.: 41228

Technivorm Moccamaster hot plate heating element for CD -models. Original spare part for CD-010, CD-011 & all other CD-models. 220V.

Product no.: 11030

Coffee maker water container. Clear polycarbonate plastic. Original spare part for Technivorm Moccamaster models with 8 cup displacement (1,0 litres). K851, 862, KB40, KBT8K.

Product no.: 44345

Coffee maker connection cable. Original spare part for Technivorm Moccamaster K741, KB741, KBG741, GCSG, KBT, KBT8K, K741H, K742H, KBGC 40 -models.

Product no.: 44347

Moccamaster power cord CD.

Product no.: 41209

Coffee jug heating element with two wires.

Product no.: 60095

Technivorm Moccamaster rubber tube. Located between water tank & heating element / boiler. Fits: K741-K743, KB741-KB744, GCSG/B and CD (clement design) -Moccamaster models. Lenght 185 mm. Outer diameter 13 mm, inner diameter 9 mm, wall thickness 2 mm. Can be cut to specific lenght.

Product no.: 46260

Coffee maker boiler thermostat / thermal protection. The part at the top of the heater. Thermostat section with 4 mm threaded pin 145 ° C, overheating protection 260 ° C. 4 pcs 6.3 mm Abiko connectors. Original spare part e.g. Moccamaster K851, K741, KB741, KB742, KB743, KB744, KBG741, KBG744.

Product no.: 50128

Moccamaster coffee grinder metal filter. Original spare part for Technivorm Moccamaster KM3, KM4, KM4TT, KM/DOS (49207). Very fine grind. Less dense sieve available with product number 50120.

Product no.: 61190+70032

Coffee maker water container attachment screws. Including 2 pcs TORX screws & 2 pcs rubber gaskets. Original Moccamaster coffee maker spare parts.

Product no.: 61150

Rubber foot for Moccamaster K741, KB741, K742, K743, Kb744, KBT8K, KBT, RC1, RC2 -models.

  • Lenght 18mm
  • Height 7mm
  • Width 9mm
Product no.: 52147

Moccamaster heating element / hot plate. Original spare part for Moccamaster KB40.

Product no.: MA004

Coffee measuring spoon for Moccamaster coffee makers. Stainless steel body with silicon rubber handle. Holds 30 cl / 2 cups of grinded coffee (i.e. the same as Moccamaster's brown plastic spoon). Silicone rubber main part in the handle and stylish design. Very durable construction, a measuring spoon that lasts forever in normal use.

  • Stem length 100 mm
  • Total length 138 mm
  • The diameter of the cup part is 40 mm
  • Height 29 mm
Product no.: 43671

Coffee maker lime indicator lamp lens / cover lid. Red plastic. Outer measures 7x10,5mm. attachment hole 5x9mm. Original spare part for Technivorm Moccamaster K741, KB741, KBG, GCS, CD -series models.

Product no.: 85025

Coffee machine filter papers. 100 pieces of filter paper in the package. Base diameter 110 mm, top about 200 mm. When spread, 245 mm. Suitable for e.g. Moccamaster Moccaking, Moccafour, Moccaserver and CD Grand AO for 1.8 liter coffee makers.

  • Filter paper has an ISO importance for the taste of the finished coffee
  • Moccamaster filter paper is oxygen bleached, very high quality and made from FSC certified paper
  • By using Moccamaster filter paper, you ensure exactly the right filtering time and that no extra flavors escape from the filter paper into the coffee
  • The Moccamaster filter paper package contains 100 X 110 mm filter paper
Product no.: MA002

Coffee maker water measuring jug. Stainless steel. Use this jug to pour water into your coffee maker to keep the machine clean & the coffee good tasting. Don't use coffee makers own jug to pour water. It's coffee oil will burn in the machine and ruins your coffee's taste.

1,25 litres, scales printed inside. Original Technivorm Moccamaster product.  

Product no.: 60092

Rubber tube for Technivorm Moccamaster coffee maker. Lenght 217mm. Outer diameter 13mm, inner diameter 9mm, wall thickness 2mm. Can be cut to the correct length if the original is shorter. Original spare part.

Product no.: 85090

Coffee filters for Technivorm Moccamaster CupOne. Original filters. Including 80 pcs of no. 1 filters.

Product no.: MA001

Moccamaster airtight coffee container. Stainless steel, black silicon cover. Stylish storage to keep your ground coffee fresh for long time.

Product no.: MA003

Moccamaster filter paper holder. Stainless steel, rubber foot. Original Moccaamaster accessory.

Product no.: 50120

Moccamaster KM/DOS -coffee grinder metal filter. Normal grind. More dense sieve available with product number 50128. Original spare part for Technivorm Moccamaster KM3, KM4, KM4TT, KM/DOS (49207).

Product no.: 12220

Coffee maker float locking ring. Located under the water container in the float rubber tube. Original spare part for all Moccamaster coffee maker models.

  • Bottom diameter 9 mm
  • The diameter of the upper end is 7.6 mm
  • Height 7 mm

First, use needle-nose pliers to pull the float's rubber hose out of the hole in the water tank (carefully) and then lock it by pressing this part inside the rubber hose.

Product no.: 41245

Coffee jug heating element for Moccamaster Auto-Off models with heating power selector switch (two switches in the coffee maker). Aluminium part length 75 mm, width 35 mm. Three wires. Wires now with 6.3mm Abiko flat connectors excluding the blue wire jumper with 4.8 mm connector (your old part may have smaller connectors). This new version is also missing one brown jumper, which you will have to add yourself.

Not for retail sale.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional with electrical permits required by law.  If an electronic component is installed by a person without electrician degree or permits the customer is responsible for any possible accidents / damage.
Product no.: 50125

Moccamaster coffee grinder metal filter. Original spare part for Technivorm Moccamaster KM3, KM4, KM4TT, KM/DOS (49207). Also available with larger hole size: Moccamaster kahvimyllyn sihti.

Product no.: 54130

Moccamaster water container float cover, metal. This spare part can sometimes become dirty over time, it can be cleansed or replaced.

Product no.: 41235

Coffee jug heating element for Moccamaster K741, KB741, KBG741 models with heating power selector switch (two switches in the coffee maker). Aluminium part length 75mm, width 35mm. Three wires. 4 pcs 6,3 mm abiko flat connectors.

Not suitable for Auto-Off -models. They use different element: Moccamaster levyn vastus Auto-Off

Product no.: 62450

Coffee maker bottom round rubber foot. Diameter 10mm, height 7mm. Original spare part for Moccamaster CD (Clement Design) -models.

Product no.: 45149

Coffee maker boiler / water heating element 1450W 240Vac. Located inside the coffee maker frame. Original spare part for Moccamaster 741 ja CD -series models. Total length 157 mm, cylinder length 141 mm, diameter at spiral tube 47 mm.

Product no.: 43650

Coffee maker jug position green signal lamp. Lens outer diameter 15mm, attachment hole diameter 12,5 mm. 6,3 mm Abiko connectors. 230V T120°c. Original spare part for Technivorm Moccaking MK010.

Product no.: 41222

Moccamaster coffee maker jug hotplate heating element. If the freshly brewed coffee feels too cool, the problem is probably in this part. For models with one switch on the side of the machine, two wires on the heating element, 4,8mm abiko connectors. PTC DBK HP13 1/24 A-A- 220-240V. Aluminum section length 40mm, width 36mm.

Not for resale.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Product no.: G285000

Coffee maker & kettle descaler tablets. 4 x 12g tabletteja. Melitta Anti Calc Tabs. Compatible for all filter coffee makers & water kettles, all brands & models.

The tablet is soaked in 500ml water. Boil half of the solution through the coffee maker and leave the rest for twenty minutes. Boil the rest of the solution through the machine. Empty the coffee maker and boil two more times clean water through the machine. In a kettle, heat the solution, do not boil. leave for 20 minutes and pour the solution into the drain. boil a couple of jugs of clean water.

Product no.: 11345

Coffee maker base plate. Fits Technivorm Moccamaster 741 series models. Does not include mounting screws. Brown fiberboard. Total length 287 mm, total width 120 mm. Mounting holes 262 x 90 mm.

  • K741
  • H741 Homeline
  • KB741
  • KB741AO
  • KBG741
  • KBG741AO
  • KB952
  • KBG962AO
  • KBGC982AO
  • HB941
  • H741AO
Product no.: 54155

Metal shaft between the float at the bottom of the coffee machine's water tank and the microswitch. Length 61 mm, shaft diameter 1,5 mm. Fits all Moccamasters.

Product no.: 50030

Coffee grinder metal blade. Original spare part for Technivorm Moccamaster KM / DOS and KM4 models.

  • Length 52 mm
  • Width in the ends 7 mm
  • Width in the middle 14 mm
  • Center hole 4 mm
  • Material thickness 4 mm
Product no.: MMAFKALK

Coffee maker descaler 1 liter. Suitable for descaling and cleaning filter coffee machines. Original Technivorm Moccamaster product.

1 - 50 of 54 results