Print

Other commercial kitchen spare parts


Display per page
Sort by
1 - 50 of 60 results
Product no.: 2002B

Energy regulator for many food heating devices, soup pots, pizza ovens (Sweba). 230V voltage, 13A. 50.57021.010

Product no.: A037165

Percolator coffee maker temperature thermostat 73°C. Oroginal spare part for Bartscher Regina 90 -model (ND100-15L, A190192).

Product no.: A040625

Percolator coffee maker overheating cut out thermostat. 150°C. Push button reset. Original spare part for: Bartscher Regina 40 (ND40-6L, A190142), Regina 90 (ND100-15L, A190192), Pro 40, Pro Plus 40T, Pro 60, Pro Plus 60T, Pro 100, Pro Plus 100T, Regina Plus 40T, Regina Plus 90T.

Product no.: 4001

Bain marie thermostat. IMIT TR2 9335, 540350/D. Suitable for e.g. for many bain maries, water heaters and other devices with an adjustment range between zero and 90 degrees celcius. The suitable knob for this thermostat is 4003. Capillary length 1500 mm, Sensor 6.5 x 95 mm, 0-90°C, 250V, Electrical connectors 6.3 mm Abiko, Shaft 6 mm / 4.5 mm, Mounting holes 28mm apart.

Product no.: 4001B

Thermostat, capillary 1500 mm. Probe 6,5 x 95 mm. 15A 250V. 40-120°C. Giga X43100, IMIT TR2. Suitable knob: väännin on 4003B.

Product no.: 401500530

The main power switch of the deep fryer / commercial appliance. 250V 16A. Replaces the  switch that has separate push buttons, on and off. Installation opening dimensions 22 x 30 mm. Two tips, 4 x 6.3 mm Abiko flat connectors. A rubber cover on top of the switch prevents grease and dirt from entering the switch. Suitable for e.g. for many RM Gastro / Redfox fryers.

Product no.: 2393

Power switch KEDU KJD17. Fits for many commercial vegetable cutters, meat grinders, band saws, circular saws etc. Attachment hole 22x50mm. 16A 250V.

Product no.: 0KI095

Commercial kitchen cutter locking handle. Locks the lid to the bottom. Black plastic. 93 x 57 mm. Original spare part for many Dito TRS -models.

Product no.: 7018

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Stiffer steel spiral protection. Fits for many Echtermann Euro Clean  -models.

Product no.: 7018B

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 100cm. Stiffer steel spiral protection. Fits for many Echtermann Euro Clean  -models.

Product no.: 1492

Commercial dishwasher boiler temperature thermostat EGO 55.13219.320. Fits also for few Bain Maries. 1-pole 16A 250V, three Abiko 6,3 connectors. Fits for many Fagor FI-series models. 3444571

Product no.: 5081

Commercial dishwasher green signal light R693055. Attachment hole diameter 12mm. 230V. Fits for Fagor -models manufactured before year 2008.

Product no.: 5082

Commercial dishwasher orange signal light R693056. Attachment hole diameter 12mm. Lens outer diameter 14mm. 230V. T120°. Fits for Fagor -models manufactured before year 2008.

Product no.: B1049

Commercial dishwasher orange signal light Z203079000. Attactment hole diameter 9mm. Lens outer diameter 10mm. 6,3 mm Abiko-connectors. 230V. Fits for Fagor -models manufactured after year 2008.

Product no.: 774380

Temperature control thermostat E.G.O. 55.13022.010. Fits for many Bain Maries, hotdog machines, boilers, pasta kettles etc. Replaces part 55.18022.010

  • Adjustable temperature range 30 ... 110 ° C
  • 16A 240V
  • Capillary tube length 830 mm
  • Sensor probe / bulbo 113 x 6 mm
  • Pass-through kit for 12 mm hole (including seals)
Product no.: 4003B

Bain marie, water heaters etc. thermostat knob. Black plastic. Scale 0-120C°. Diameter 42 mm, height 15,5 mm. Axle 6mm (4,5 mm from the flat area). Fits for thermostat 4001B.

Product no.: 653229

Cutter blade for vegetable cutter. Micro-toothed blades. Original spare part for many older Electrolux / Dito Sama K55 5.5l cutters. Check fit based on dimensions!

  • Plastic frame height 176 mm
  • The outer diameter of the plastic body from the lower end is 62 mm
  • The inner diameter of the plastic body from the lower end is 42 mm
  • Plastic body cap diameter 50 mm
  • The total diameter of the blades is 200 mm
Product no.: 653582

Cutter blade for vegetable cutter. Micro-toothed blades. Original spare part for many Electrolux / Dito Sama 5.5l cutters. Check fit based on dimensions & suitability list!

  • Plastic frame height 141 mm
  • The outer diameter of the plastic body from the lower end is 61 mm
  • The inner diameter of the plastic body from the lower end is 43 mm
  • Plastic body cap diameter 63,5 mm
  • The total diameter of the blades is 212 mm
Product no.: 84919

Stretchable power cord. The spiral section stretches, the length of the cord is 50 cm short, 200 cm long. 215 mm straight cord at the ends.

  • Copper conductors 1.5 mm2
  • Wire protective colors brown, blue, yellow-green
  • Cable thickness 9 mm
  • Outer insulation material PUR
  • Operating temperature -25 ... 70 °C
  • Voltage resistance 450 / 750V
Product no.: B1128

Commercial dishwasher water boiler heating element O-ring seal. Inner diameter 47 mm, outer diameter 57 mm. Thichness 5,34 mm. Replaces part 0L2765. Fits for many Electrolux EUC, NUC -series models & for heating elements 049980, 0L1851, 058666.

Product no.: 401520000

A microswitch with plunger that engages when the fryer heating element package is in place. Metal button. Suitable for e.g. for many Electrolux, RM Gastro, Elettrobar fryers. Size 47 x 40 x 13 mm.

Product no.: 0KJ735

Potato peeler motor timing belt. 150 XL 075 H20. Fits many Dito Sama, Electrolux Professional, Zanussi, Metos T5 series models.

Product no.: 0KJ019

Potato peeler main power switch. Positions I - O. Mounting hole 22 mm. 16A 250V. Fits many Dito Sama, Electrolux Professional, Zanussi, Metos T5 series models.

Product no.: SN313-3/10/3.0B

Power cord, length 3 meters. Suitable for e.g. to many Animo coffee containers and commercial kitchen serving trolleys.

  • Female IEC 60320 C15 plug (Groove on the middle conductor on the wide side of the plug)
  • Euro Schuko CEE 7/7 (E / F) angle plug
  • 250V 10A
  • Conductors 1.0 mm2
Product no.: 0KI843

Vegetable cutter ejector disc, original spare part. See list for compatible models

Product no.: SN313-3/10/5.0B

Power cord, length 5 meters. Suitable for e.g. to many Animo coffee containers and commercial kitchen serving trolleys.

  • Female IEC 60320 C15 plug (Groove on the middle conductor on the wide side of the plug)
  • Euro Schuko CEE 7/7 (E / F) angle plug
  • 250V 10A
  • Conductors 1.0 mm2
Product no.: SN313-3/07/1.8B

Power cord, length 1,8 meters. Suitable for e.g. to many Animo coffee containers and commercial kitchen serving trolleys.

  • Female IEC 60320 C15 plug (Groove on the middle conductor on the wide side of the plug)
  • Euro Schuko CEE 7/7 (E / F) angle plug
  • 250V 10A
  • Conductors 1.0 mm2
Product no.: 0D5560

Professional vegetable/mozzarella cutter cutting block. Original spare part. See list for compatible models.

Product no.: E0P2473

Bain marie thermostat, original spare part. Fits model X81128-1 (50083). Dimensions 52 x 49 x 12 mm, axle 6 mm.

Product no.: 0D5564

Professional kitchen vegetable cutter hopper hinge and screws. Original spare part, see list for compatible models.

Product no.: 4003

Thermostat knob 3444008 suitable for bain maries, etc. Scale 0-90 ° C. Black plastic. Diameter 42 mm, height 15.5 mm. Shaft 6 mm (4.5 mm at chamfer). Suitable for e.g. thermostat 4001

Product no.: 2105B

Timer clock switch, 30 min timing. Turns off or on the device after 0-30 minutes. Also includes a knob and time scale. Suitable for e.g. for many drying cabinets, agricultural and automation installations. 30 min., 250V, 16A, T125 ° C, 2 pol, 47 x 45 x 30 mm, axle 22 mm, Ø 6 mm

MI2R20630M + S30M + RG

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 653028

Vegetable cutter finely toothed blade for 3,5 l cutter. Original spare part for Electrolux Professional / Dito Sama K35 models. Boss diameter 62 mm, overall heigth 165 mm. See list for compatible models.

Product no.: 653029

Vegetable cutter smooth blade for 3,5 l cutter. Original spare part for Electrolux Professional / Dito Sama K35 models. Boss diameter 42 mm, overall heigth 160 mm. See list for compatible models.

Product no.: 653146

Vegetable cutter smooth blade for 2,5 l cutter. Original spare part for Electrolux Professional / Dito Sama K25 models. Boss diameter 55 mm, overall heigth 80 mm. See list for compatible models.

Product no.: 650035

Vegetable cutter microtoothed blade for 2,5 l cutter. Original spare part for Electrolux Professional / Dito Sama K25 and Multigreen models. See list for compatible models.

Product no.: W4-41309

Thermostat that controls the temperature of the bain marie devices, etc. EGO 55.13223.010.

  • Capillary length 1150 mm
  • Capillary lead-through 8 mm
  • Adjustment range 30-110 ° C
  • One pole 1N
  • Sensor 8 mm / 115 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 1128

Solenoid valve repair kit 048046 for Müller valves. Star on the membrane, height 8 mm.

Product no.: 4001C

Bain marie thermostat. Compatible knob: 4003C Imit 0-210°C

  • Temperature area 0-210°C
  • Capillary length 1000 mm
  • Sensor 5 x 140 mm
  • Axle 6 / 4,6 mm
  • Connectors 6,3 mm Abiko
Product no.: 2766

Professional kitchen convection oven / boiler overheating sensor, 140°C. Fits Electrolux Professional models AOS061-202. Capillary lenght 890 mm, sensor ø 6 x 87 mm. Suggestive picture.

Product no.: 2655

Professional kitchen convection oven / boiler overheating sensor, 338°C. Fits Electrolux Professional AOS-series models.

Capillary lenght 900 mm, sensor ø 6 x 53 mm. Suggestive picture.

 

Product no.: 9039

Professional washing machine water heating element 230V / 2500W for Wascator models W73 and W74.

Length 300 mm, width 40 mm, flange 60 x 26 mm.

Product no.: 0D7814

Professional kitchen food processor tank protection kit, stainless steel. Width 345mm, height 198mm. Original spare part, see list for compatible models.

Product no.: 4003C

Knob for the bain marie  thermostat. Imit 556313. Scale 0-210 degrees. Suitable for 6 mm shaft (D-shaped hole 6x4.6 mm). Black plastic. Compatible with thermostat 4001C.

Product no.: 4004

A knob for thermostats and controls. Diameter 42 mm, height 15,5 mm. Black plastic. Arrow scale. Fits to 6/4.6 mm D-shaped axle.

Product no.: 4003D

Knob for the thermostat of an oven, stove or other heating device. Imit 556326. Scale 0-300 degrees. Suitable for 6 mm shaft (D-model 6x4.6 mm). Diameter 41 mm, height 15.5 mm. Black plastic. Suitable for e.g. to thermostat 4001D.

Product no.: 4001D

Thermostat controlling the temperature of an oven, stove or other heating device 0-300°C. Single phase 16A 230V. Capillary length 1500 mm. Sensor part Bulbo 3.5 x 190 mm. D-shaped axle 6x4.6 mm. Toggle switch tip ( C-1 closed or C-2 open). Imit TR2 9332. Compatible knob: 4003D

Product no.: 4003E

Thermostat knob washer Imit 556501. Chromed steel. Suitable for thermostats and controls with a distance of 28 mm (20 x 20 mm) across the mounting holes around the axis. Outer diameter 56 mm. Flat area for the knob 42 mm.

Compatible products:

Product no.: 4023

EGO 55.34023.815 thermostat that controls the temperature of a commercial kitchen bain marie or boiler.

  • Adjustment range 30-110°C
  • Three-phase 10A 400V
  • Sensor 6x130 mm
  • Capillary 1200 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 2633

Thermostat controlling the temperature of the bain marie or boiler. Replaces part 33060301. Fits many Metos, Rational, Frima, Rieber models.

  • Adjustment range 30-110°C
  • Single-phase, 220-240V 16A
  • Sensor bulbo 6x140mm
  • Capillary length 1400 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

1 - 50 of 60 results