Print

Bravilor_Bonamat

Bravilor_Bonamat

Spare parts and accessories for Bravilor Bonamat coffee makers. If you can't find the part you're looking for, ask us!


Product no.: 5111

Coffee machine circuit board 6.301.713.000. Original spare part for Bonamat Mondo 1, Mondo 2, Mondo 3 -models (TH10) from years 1996-2010. Replaces older versions (including installation guide).

Product no.: 5124

Coffee maker level display glass pipe. L 244mm, diameters 12/9mm. 6240124001. Fits for Bravilor Bonamat B5-HW, VHG5.

Product no.: 5522

Commercial coffee machine heating plate and heating element 6.101.072.000. 100-240V. Fits many Bravilor Bonamat MondoTwin, MaticTwin, Novo, Matic, Mondo, HP2, MTCTW-032 (8.010.060.31002) models manufactured after 2009.

  • The largest diameter of the plate is 125 mm
  • cable length 500 mm
Product no.: Q300837

The glass pot / carafe of the commercial restaurant coffee maker. Volume 1.7 liters. Hinged lid. Cover and handle in black plastic. Original spare part for Bravilor Bonamat Novo, Mondo and Matic series models. 7.170.602.101

Product no.: Q300878

Coffee machine filters in a box of one thousand pieces. The diameter of the bottom of the filter cup is 85 mm, the diameter of the upper edge is 245 mm. Original filter for Bravilor Bonamat Novo, Matic, Mondo, Iso, TH, RLX, series comemrcial filter coffee makers. 7.150.101.103. Replaces part 7.150.101.101.

MONDO, MONDO TWIN, MATIC, MATIC TWIN, ISO, TH, NOVO, RLX 41, RLX 76, RLX 575, RLX 75, RLX 585, RLX 55, RLX 5, RLX 131, RLX 676, THa

Product no.: 5197

Coffee machine coffee tank heating resistor 6.240.147.000. PTC element plate resistor, aluminum. Suitable for Bravilor Bonamat B5, B5HW, VHG5, VHG5T models.

Product no.: 5562

Coffee maker black plastic filter holder for many Bravilor Bonamat Novo models. See pictures for dimensions.

Product no.: 5102

Coffee maker boiler heater 1710W / 230V, fits Bravilor Bonamat Mondo Twin- and Matic Twin- coffee machines. 

  • 1710W / 230V
  • Diameter 82 mm
  • Length 105 mm
  • Connectors Abiko 6,3 mm
Product no.: 5105

Coffee maker boiler o-ring seal, fits Bravilor Bonamat Mondo Twin- and Matic Twin- coffee machines. 

  • Height 3 mm
  • Diameter 74 mm
Product no.: 7.094.100.101

Measuring spoon for dispensing coffee grounds in commercial coffee machines. The spoon holds approximately 40 grams of coffee. Spoon dimensions 160 x 55 mm. Brown plastic. Original spare part for Bravilor Bonamat coffee machines.

Product no.: Q300372

Bravilor Bonamat coffee maker switch with light, fits e.g. models B10 and B20. Original spare part, see list for compatible models.

  • 16A, 250V
  • Positions 0-1
  • Max temperature 85°C
  • Mounting hole 22x30 mm
Product no.: Q299435

Bravilor Bonamat coffee maker PTC heating element 230V, fits e.g. models B10. Original spare part, see list for compatible models.

  • 90W, 100-240V
  • Dimensions 75 x 48 x 11 mm
  • Cable length 250 mm
Product no.: 7119403

Coffee maker filter holder 7.090.102.101. Original accessory for some model versions of Mondo, Matic, TH, Tha. Metal basket with black plastic frame, front trim fits the coffee maker switch panel lower edge. See list for compatible models.

Product no.: 6.017.003.006

Magnet located at the bottom of the coffee container of a coffee machine. This part tells the machine that the container is in place in the machine (there is a reed switch at the bottom of the machine where the container is, which the magnet operates). Original spare part for many Bravilor Bonamat B10, B20, VHG series models. Check the compatibility with your model in the compatibility table using the device model information.

Includes magnet only (part shown in product image), does not include mounting parts.

Product no.: 6.206.630.000

REED switch for measuring the position of the coffee container in a coffee machine. A magnetic switch that tells the device's circuit board whether the coffee container is in place in the device for brewing. Original spare part for some Bravilor Bonamat B10, B20, B40 series models. Check the compatibility with your model in the compatibility table using the machine's model information.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 6.101.113.000

REED switch that measures the amount of water in the coffee maker. A magnetic switch that tells the device's circuit board whether there is water in the water tank for boiling. Located at the bottom of the water tank. Original spare part for some Bravilor Bonamat Mondo and TH series models since year 2010. Check the compatibility with your model in the compatibility table using the model information of the coffee maker.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 6.101.061.000

Coffee maker heating element in its steel container. 230V 2000W. Original spare part for many Bravilor Bonamat Mondo, TH series models. Check the compatibility with your model in the compatibility table using the machine model information.