Bartscher

Percolator coffee maker rising tube silicone seal. Located in the cup at the lower end of the metal riser tube. Original spare part for Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• Outer diameter 31 mm
• Thickness 2 mm

Silicone seal between the boiling element and the inner base of the percolator coffee maker. Inner diameter 55 mm, outer diameter 63 mm, thickness 2.3 mm. Fits many Bartscher Regina, Pro series models.

The retaining nut and tightening screw located at the upper end of the glass display tube of the percolator coffee maker. Metal. Original Bartscher spare part for PRO40T, PRO60T, PRO100T models (ND40 / ND60 / ND100).

Percolator coffee maker lid. Black plastic. The diameter of the sealing surface of the lid is 213 mm. Maximum diameter 237 mm. Original spare part for Bartscher Regina 40 6.8L A190142, Regina 40T A190146, Regina PLUS 40T A190149 and ND40-6L(B).

Percolator coffee maker overheating protection. Cut-off temperature 216 degrees. Replaces part E0139TL. Suitable for e.g. For Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• 250V, 10A
• 216°C

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Percolator coffee maker overheating protection. Cut-off temperature 190 degrees. Manual confirmation button on the bottom. Original spare part for Bartscher PRO II 40T A190148, PRO II 60T A190167, PRO II 100T A190198 models.

• KSD301-CR
• 15A250Vac 
• 190°C

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Percolator coffee maker side handle. Original spare part for Bartscher Pro 60T & Pro 100T -models.

Percolator coffee maker faucet. Original spare part for Bartscher PRO II 40T (A190148), PRO II 60T (A190167) and PRO II 100T (A190198).

• The diameter of the penetration is 14 mm
• Internal thread for attaching the display tube 15 mm

Note! older models use different tap: Perkolaattorin laskuhana PRO 40T / 60T / 100T

Percolator coffee maker water rising tube. Steel. Silicone seal in the bottom cup. Original spare part for Bartscher PRO II 100T (A190198) model.

Percolator coffee maker temperature thermostat KSD301 250V 10A. Cut off 65°C. Original spare part for Bartscher Regina 40 -models:

• Regina Plus 40T (ND40-6L, A190146)
• Regina 40, 6,8L (A190142)
• Regina 40 ND6.8L(B model)

Percolator coffee maker boiling heating element. Located in the center of bottom. Original spare part for Bartscher Regina 40 -models:

• Regina Plus 40T (ND40-6L, A190146)
• Regina 40, 6,8L (A190142)

Percolator coffee maker temperature upkeeping heating element. Located in the edge of bottom, surrounding the boiling element. Original spare part for Bartscher Regina 90 (ND100-15L, A190192), Regina Plus 90T (ND100-15L A190196).