Estimated delivery time: 4-14 business days.
Electrolux / Zanussi support for arm (upper)
Estimated delivery time: 2-10 business days.
Magnetic water valve for many commercial kitchen appliances f. ex. dishwashers. Input 1/2" male, output 1/2" male. 6,3mm Abiko -connectors. 220-240V 50-60Hz. A.u.K. Müller SVGW 70010.
Estimated delivery time: 2-10 business days.
Commercial dishwasher over flow pipe o-ring seal Q307051. Original spare part for Fagor FI-100, FI-120, FI-80, FI-72, FI-64B, FI-64. FI-48B, FI-48, FI-30 -models. Outer diameter 41mm, thickness 2mm.
Estimated delivery time: 2-10 business days.
Commercial dishwasher bottom tub. Located under the filter sieve. Original spare part for many Fagor FI -series models.
12024367, 5011630
Estimated delivery time: 2-10 business days.
Commercial dishwasher bottom tub rubber gasket. Original spare part for many Fagor FI -series models. 12024556, Z200907000
Estimated delivery time: 2-10 business days.
Commercial kitchen dish pre-rinse shower hose 547432. 1/2" attachments with inner thread. Lenght 100cm. Steelbraided plastic covered hose. Fits for many Echtermann Euro Clean -models.
Estimated delivery time: 2-7 business days.
Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 80cm. Steelbraided hose. Fits for many Echtermann Euro Clean -models.
Estimated delivery time: 2-7 business days.
Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Steelbraided plastic coated hose. Fits for many Echtermann Euro Clean -models.
Estimated delivery time: 2-7 business days.
Commercial dishwasher over flow pipe cover cap / lid. Fits for many Metos WD-6, WD-7 -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher rinse arm boss / center piece 75920/A. Fits Dihr, Metos Hood, MM5, series models.
Estimated delivery time: 2-10 business days.
Pre rinse shower tap / mixer faucet 540351. Including installation parts, hoses 3/8" (520466) & hose adapters. Output 3/4" outer thread for rising tube. Fits for many Gastrotop, Echtermann, LF, Friulana Rubinetterie, EPGC, Ascaso -pre rinse models.
Estimated delivery time: 2-7 business days.
Commercial dishwasher hydraulic rinse aid doser. Fits for newer Fagor -models & Adler, Comenda. 20199, 40145.
Estimated delivery time: 4-7 business days.
Commercial dishwasher rinse arm jet nozzle for 10mm arm diameter. Including nozzle halfs 517032, bolt, nut & o-ring seal 517035. Fits for Metos Master 2, Master 3 & many Dihr -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher washing arm jet nozzle for 28,5mm arm diameter. Including nozzle halfs 517311, bolts & nuts. Fits for Metos Master 2, Master 3 & many Dihr -models. 10211
Estimated delivery time: 2-10 business days.
Commercial dishwasher washing arm lower support. Dihr 500612, Metos 5210230. Fits for many Metos Master 2, GS50, GS45, Tekno 6, LUX 60-EL, Aqua 80 -model.
Estimated delivery time: 2-10 business days.
Commercial dishwasher spray arm bottom holder O-ring gasket 13015. Fits to part 1628B (Dihr 500612, Metos 5210230).
Estimated delivery time: 2-10 business days.
Commercial dishwasher wash / rinse arm senter impeller. For tube sizes 28mm & 10mm. Fits for many Metos Master 2, Dihr -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher wash / rinse spray arm assembly. Tube sizes 28mm & 10mm. Fits for many Metos Master 2, Dihr -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water inlet valve 230V 50/60Hz MAX 90°C. Replaces parts Z701135000, 12025161. Fits: Fagor FI-30, FI-48, FI-48B, FI-64, FI-64B, FI-72, FI-80, FI-100 -models & much more. Inlet 3/4" (c. 25mm). Outlet 12mm straight.
Estimated delivery time: 2-7 business days.
Water inlet valve 220/240V 50/60Hz. Max. temperature 90°C. Inlet 3/4" - outlet ø 13.5 mm in 90° angle. 6,5mm Abiko -connectors. Fits for many Meiko & Hobart dishwashers.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 2-10 business days.
Commercial dishwasher washing arm lower support nut. Dihr 500610, Metos 500623. Fits for many Metos Master 2, GS50, GS45, Tekno 6, LUX 60-EL -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water rising tube Z200706000. Located between bottom & top washing arms. Hard plastic, rubber end cuffs. Replaces parts 12023699, GEV 505169. Original spare part for many Fagor FI-30, FI-48, FI-64, AD -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water rising tube Z410711000. Located between bottom & top washing arms. Hard plastic, rubber end cuffs. 530mm. Replaces parts 12024059, GEV 505181. Original spare part for many Fagor LVC -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water rising tube Z440711000. Located between bottom & top washing arms. Hard plastic, rubber end cuffs. Length 590mm. Replaces parts 12025154, GEV 505182. Original spare part for many Fagor LVC -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water rising tube Z260701000. Located between bottom & top washing arms. Hard plastic, rubber end cuffs. Length 790mm. Replaces parts 12024606, GEV 505188. Original spare part for many Fagor FI-72 -series models.
Estimated delivery time: 2-10 business days.
Commercial appliance / dishwasher / oven 3-way hose connector tube Z201106000. Fits to 12mm hoses. Length 75mm, tube outer diameter 12,5mm, inner diameter 9mm. Original spare part for many Fagor, Dihr, Zanussi -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher pressure chamber Mod S.P. 121, 12134442. measures water level. Including brass hose connector, bolt & O-ring seals. Fits many Fagor, Hobart, Comenda and Elettrobar models.
Estimated delivery time: 2-7 business days.
Commercial dishwasher top water supplier + seal. Original spare part for Fagor FI-30, FI-48, FI-64, FI-72 -models. Z200707.
Estimated delivery time: 2-10 business days.
Commercial dishwasher bottom water divider + seal. Original spare part for Fagor FI-80 & FI-100 -models. Z710706
Estimated delivery time: 2-10 business days.
1 - 30 of 68 results |
|