Plastic cover / insulator for the 6.3 mm flat connector. Suitable for protecting and insulating 6.3 mm Abiko connectors. The cover is installed on the connector by pushing it from the front side of the connector, this model can be installed on the connector after connecting to the wire. Sold individually.

A screw-mounted electrical device panel socket for the mains power cable. C14 connector with three poles, suitable for three-pole C13 plug. Suitable for e.g. to many lamps and other electrical devices.

• Width 44 mm
• Height 34 mm
• Depth 20 mm
• Mounting hole 27 x 31 mm
• The distance between the attachment holes is 36 mm
• 250V 10A
• 3 x 6.3 mm flat connector to the rear
• Covered fuse box for 5x20 tube fuse (fuse not included)
• Lid has a space for extra fuse

Suitable fuse type: Keraaminen putkisulake 10A 20x5mm, 10kpl

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Silicone-based heat transfer paste, e.g. for computer components. 25g tube, white color. Operating temperature -50...200°C, resistance against bursting 30V/mm.

• AG Termopasty ART.AGT-056
• Density at. 20°C: 1,47 g/cm3
• Flash point: 350°C
• Freezing point: -50°C
• Refraction coefficient: 1,405
• Specific heat at 50°C: 0,243 Cal /g K
• Overall heat-transfer coefficient at 0-50°C:0,88 W/m K
• Dielectric constant at 100 Hz: 4,7 (±0,1 )
• Cross-through resistance: 5 x 1014 Ohm x cm
• Loss tangent at f=100 Hz: 0,020 (±0,003)
• Operating temperature range: -50~200°C