Air conditioner rack. L 800mm, H375mm, D 465mm.

Pressure differential switch between cooker hood or top fan and house ventilation unit. The switch will electronically transfer the relay information to the air conditioner unit from the pressure difference between the indoor air and the hood's extractor tube, measured from the cooker hood or top fan output tube. Suitable for both internal and external motored cooker hoods. Includes installation instructions and accessories for installation: 2m pressure hose, two sensor pins, mounting screws. The suitability of the house air handling unit for the relay data should be checked from the machine manufacturer. Also suitable for a wide range of air pressure and flow control applications. Product information

• The trigger release pressure can be adjusted between 20-200 Pa
• Electrical limit values for resistive load: 0.1 A / 250 VAC
• Operating temperature: -20 to +60 ° C
• Pressure connectors: Male ø 5.0 mm
• Pressure hose: PVC 1x2m
• Protection class: IP54
• Dimensions of the switch unit: 73 (89) x 105 x 63 mm (W x D x H)

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Kitchen cabinet ventilation grille. Aluminium grey color, made from pure aluminium. Suits for oven, refrigerator, cooker hood ventilation.

• Total length 500 mm
• Total height 80 mm
• Attachment hole length 477 - 490 mm
• Attachment hole height 66 - 70 mm
• Attachment collar depth 16 mm

Caravan / RV air conditioner cover lid. White plastic. Original spare part for many Electrolux Dometic FJ1100, FJ1700, FJ2200 -series models.

Air ventilation unit preheating coil set. R model. Includes 2 pre-bent 10 mm copper mounting tubes, 2 black plastic protective tubes, 332 x 125 x 45 mm heater cell and 436 mm white metal mounting plate. Original equipment for Vallox Digit2 SE: 3550 SE, A3550 SE models.

Mounting plugs for the cover of the air conditioner on the roof of the caravan / motorhome. The package includes 6 pieces of plastic fasteners. Original spare part for many Electrolux Dometic FJ, B series models. Check the model view for compatibility with your device.

Output air outlet pipe for portable air conditioner. Flexible and stretchable tube for directing air out. Outer diameter 150mm, inner diameter 133 mm. Original spare part for many Electrolux EXP08, EXP09, EXP12 series models. Check the fit table for your model.

Portable air conditioner exhaust pipe connector. With this ring, a flexible and stretchable tube is connected to a portable air conditioner. Original spare part for many Electrolux EXP09, EXP12 series models. Check the fit table for your model.

The Silent Click water lock prevents the sound caused by water when the water lock dries. Suitable for Vallox ventilation units manufactured after 04/2010, which have a base plate that enables installation. Installation and maintenance space under the machine 75 mm. Can be installed not only on the bottom basin but also on the wall. The package includes the fixing and locking parts, the frame (inside the ball head) and the pipe connector, as well as the fixing screws and installation plugs. Installation instructions also included.

Fan motor for ventilation machines, etc. applications. Replaces previous engines R2E190AO9603, R2E190AE77.

• centrifugal fan, voltage adjustable external rotor synchronous motor
• power 52W with best efficiency, 48W free-blowing
• rated current 0.23 A
• capacitor 1.5 µF (to be ordered separately)
• voltage: 1 ~ 230 VAC
• frequency: 50 Hz
• speed: 2350 rpm
• air volume 150 l / s (540m3 / h)
• Direction of rotation clockwise from the rotor

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.