Vacuum cleaner suction hose handle. Chromed tube. The handle has a thumb-operated side air valve that allows you to adjust the suction power. Includes lock ring and threaded hose end collar for 38-39 mm outer diameter hose. The outer diameter of the handle tube is 32 mm (head slightly conical, measured from the tip 31 mm, fits all 32 mm nozzles and telescopic tubes). Suitable for e.g. Allaway, BEAM, Everybody, Puzer, Nilfisk, Electrolux, Volta, AEG, Zanussi, Philips, Aertecnica, dustbin, fresco and more.

Compatible with product Vacuum cleaner telescopic tube 32 mm 58-98cm.

Alternative product Suction hose handle 32 mm, long

• Outer diameter of the white threaded part 44 mm
• Height of white thread part 24 mm
• Inner diameter of the white threaded part 39 mm
• Suitable for suction hoses with an outer diameter of 38-39 mm

​Installation instructions

Note! the handle does not have a central vacuum cleaner start switch. The handle fits into the hose which starts the vacuum cleaner when the hose is pushed into the wall box.

The handle part of the suction hose of the vacuum cleaner, the oval-shaped 36 mm Aeropro- connection to the telescopic tube. A handle with NO remote start of the vacuum cleaner. Thumb-operated suction power reducer. Original spare part for many AEG Electrolux UltraSilencer, UltraPerformer, UltraActive, UltraOne, UltraFlex, UltraCaptic, Pure C9, Pure D8 series models. Check the compatibility with your model using the PROD/PNC number found on the bottom of the vacuum cleaner in the compatibility table.

Replaces handles 2193710015, 2193710023, 2193710031, 2193710049, 2193710056, 2193710064, 2193710155, 2193710163, 2193710262, 2193710304, 2193710312, 2193710320, 2193710346, 2193710353, 2193710361, 2193710379, 2193710395.

Handle for many electrolux Ultra Performer, Ultra Active and Ultra Silencer vacuum cleaners with an oval 36 mm Aeropro attachment.

Hose handle for UltraOne Z8860C &  Z8860CS vacuum cleaner. Remote controller. 2193711591.

Original spare part for only these models (Check the PNC number!):

Reprogramming:

1. Press ON/OFF button on cleaner and keep it pressed while inserting the main plug.
2. Keep the ON/OFF button pressed until the AUTO LED:s start flashing, the cleaner is now in RF learning mode. Release the ON/OFF button.
3. On the remote control press the ON/OFF button.
4. If the cleaner have received the new RF remote address the power bar will start flashing, indicating that the learning process is finalized.
5. On the cleaner, press the ON/OFF button. The cleaner will now be in standby mode.
6. Start the cleaner either with the remote control or on the cleaner

Vacuum cleaner hose handle with remote control. Fits for many Electrolux Ultra One models without motor floor tool.

Programming:

• Press the ON / OFF button on the vacuum cleaner and hold it down as you push the vacuum cleaner's electrical outlet on the socket.
• Keep the vacuum cleaner ON / OFF button pressed until the AUTO LEDs are blinking. Cleaner is now on the remote control learning mode. you can let go of the vacuum cleaner ON / OFF button
• Press the ON / OFF button on the handle.
• If programming was successful, starts the power indicator LED flash, which indicates that the learning process is finished.
• press the ON / OFF button. vacuum cleaner is now on standby for launch on the remote control.

Vacuum cleaner suction hose handle with remote control. You have to configure the remote control to the vacuum cleaner or change the old remote from your old handle. Original spare part for many AEG / Electrolux UltraActive, UltraPerformer ja UltraSilencer -models:

Vacuum cleaner suction hose handle. RF remote controller included. Original spare part for many Electrolux Ultra One Mini & Deluxe -series models.

Resetting the controller:

1. Plug in the vacuum cleaner power cord
2. Immediately press the on / off and minus (-) buttons on the remote control and hold for 3 seconds
3. Unplug the vacuum cleaner from the wall for at least three seconds
4. Plug in the vacuum cleaner power cord
5. Immediately press the on / off and plus (+) buttons on the remote control and hold for 3 seconds
6. The cleaner should now start from the remote control

Vacuum cleaner hose handle remote controller. Original spare part for many AEG Electrolux Ultra Performer, Ultra Active, Ultra One -series models.