Timer switch / Mechanical timer 4 h. OEM MI2R2064H. 4 hour timing. Turns off the device after 0-4 hours. Also includes a knob and time scale. Suitable for e.g. for many drying cabinets, agricultural and automation installations.

• Operating voltage: 250 V AC / 16 (4) A
• Operating temperature: -30 ° C to 125 ° C
• 6.3 x 0.8mm Abiko
• Dimensions of the scale board 68 x 68 mm
• Knob diameter 40.5 mm
• Faucigny instruments MI2R2064H + RG + S4H

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Time clock switch, 6 hour timer. Turns off the unit after the selected time (0-6) hours. Also includes a black knob and aluminum time scale. Mechanical clock movement, two connecting poles. Suitable for e.g. for many drying cabinets, agricultural and automation installations.

• 6 h
• 250V, 16A
• T125°C
• 2 pol
• 47 x 45 x 30 mm
• axle 22 mm, Ø 6 mm

MI2R2066H +S6H +RG faucigny instruments

Mechanical timer clock switch. 2 hour (120 min) timing. Two changeover contacts, turns the device off or on after 0-2 hours. Also includes a knob and a time scale. Suitable for e.g. for many drying cabinets, agricultural and automation installations.

• 0-120 min
• 250V, 16A
• T125°C
• 2 poles / tips, 6 x 6.3 mm Abiko flat connectors
• 47 x 45 x 30 mm
• Scale plate 68 x 68 mm
• axle 22 mm, Ø 6 mm
• Faucigny Instruments OEM Type Mi2

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Timer 15 min., 250V, 16A, T125°C, 2 pol, 47 x 45 x 30 mm, axle 22 mm, Ø 6 mm. MI2R2061M + S15M + RG

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Time clock switch, one hour timer. Turns off the unit after 0-60 minutes, depending on the time you select. After the set time, both tips of the switch change position. Also includes a knob and time scale. Suitable for e.g. for many drying cabinets, agricultural and automation installations.

• MI2R20630M + S60M + RG
• Mounting hole distance 28 mm
• 60 min
• 250V, 16A, T125 ° C
• 2 switching tips / changeover contacts
• External dimensions 47 x 45 x 30 mm
• Aluminum scale plate 68 x 68 mm
• Shaft 22 mm, Ø 6 / 4.5 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Thermostat controlling the temperature of the drying cabinet EGO 55.17012.060 70°C. Original spare part for many Electrolux EDD, Husqvarna QW series models. Check the compatibility with your model in the compatibility table with the PROD/PNC number found on the model label of the cabinet.

• The distance between the fixing holes is 28 mm
• Shaft diameter 6 mm
• Shaft at the bevel 4.6 mm
• Shaft length 19 mm
• The diameter of the capillary sensor is 6 mm
• Sensor length 91 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Dryer cabinet wire shelf holder. Including one piece. Original spare part for many Electrolux WD EDD, Elektro Helios ET, Husqvarna QW, Zanussi TS -series models.

Dryer cabinet fan motor assembly. rotor L 300mm, rotor D 61mm. Attacments 313mm x 46mm. 6,3mm abiko -connectors. 230V 50Hz. Fergas Sweden (50283). Fits for many Electrolux WD203 WR, Husqvarna QW, Zanussi TS -series models.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Cabinet dryer fan assembly 32 2060-24030L. On some models, you will need to make mounting holes for the heating element on the edge of the fan opening yourself. Rotor L 300mm, rotor D 61mm. Attacments 314mm x 46mm. 6,3mm abiko -connectors. 240V 50Hz, 35W. Original spare part for many AEG TS, Electrolux EDD210, Husqvarna QW, Rosenlew KK -series models.

• Fan blade length 240mm
• Wing diameter 61mm
• Maximum length about 310mm
• Mounting lug distance 265mm, spacing 46mm
• 6.3mm Abiko connectors
• 240V 50Hz, 35W
• Fergas 116528
• Replaces the fan Fergas 51022, FIME C25R8107 CL.H

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional with electrical permits required by law. If an electronic component is installed by a person without electrician degree or permits the customer is responsible for any possible accidents / damage.

Dryer cabinet timer switch. Replaces older Invensys -timer. Original spare part for many Electrolux EDD210, Husqvarna QW -series models. Please note that the appearance of the mechanism may differ from the original of your machine, as the manufacturer of the part has changed. The new movement replaces the previous Invensys branded clock. The wiring diagram and connector numbers are marked on the back of the part.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.