Model sticker locator
Click the appliance that you have and find out where the model sticker can be found.
Model sticker locator
Your basket is empty.
Front page Professional kitchen spare parts Dishwasher wash and rinse arms
wash and rinse arms
Commercial dishwasher over flow pipe fitting / drain connection. Including 2" / 48mm drain part Z710902000, 72x56x2mm seal Q307059000 & 2" attachment nut Q220001000. Original spare part for many Fagor FI-80, FI-100 -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher rinse arm jet nozzle holder nut. Grey plastic. Fits for many Elettrobar E, Fast, Niagara, Clean, Colged Steel -series models.
- Top diameter: 16mm
- Bottom diameter: 17mm
- Height: 9mm
Estimated delivery time: 2-10 business days.
Commercial dishwasher rinse arm jet nozzle. Plastic. Fits for many Elettrobar E, Fast, Niagara, Clean, Colged Steel -series models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water inlet valve. One coiled solenoid 220-240VAC. 90 degree angle. Inlet 3/4" (thread from top 26,3 mm), outlet 14,5 mm. 6,3 mm Abiko connectors. Attachment collar holes 45 mm. Original spare part for many Electrolux -models.
An accessory version is also available (with separate flat connectors): Magneettiventtiili, yksiosainen kulma 14 mm
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
Estimated delivery time: 2-10 business days.
Commercial diswasher water rising tube 115140. This part provides water to the ceiling top spray arm. Fits for many Colged Neotech, Protech, Startech, Steeltech, Toptech, Elettrobar Niagara, Pluvia, River -series models.
Estimated delivery time: 4-10 business days.
Commercial dishwasher overflow / drain tube 048842. Including 30 mm x 2,5 mm O-ring seal 046799. Pipe total length 271 mm, bottom seal outer diameter 30 mm. Top hat outer diameter 39 mm. Grey plastic. Fits many Electrolux EUC, NUC, WT, Zanussi -models.
Estimated delivery time: 2-10 business days.
Commercial dishwasher water inlet valve. Single valve, 90 dergee angle. AC 24V 50Hz. Outlet 14 mm. Inlet 3/4". Max 90°C. Fits for many Meiko, Zanussi -models.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 2-10 business days.
Commercial dishwasher rubber outlet hose. Joint inner diameters of the joints 48, 35, 34 mm. Fits many Dihr HT12 models.
Estimated delivery time: 2-10 business days.
Professional dishwasher washing tube end plug, diameter 8mm.
Estimated delivery time: 2-7 business days.
Professional dishwasher washing tube end plug, diameter 10mm.
Estimated delivery time: 2-7 business days.
Water valve for a commercial dishwasher or other appliance. Single coil straight solenoid valve. Replaces parts 058996, 0780058996, 7I058996. Suitable for e.g. many Electrolux and Zanussi dishwashers. 3120505
- Coil 24Vac 50/60Hz (alternating current)
- Input 3/4 "
- Output 12 mm 180°
- 6.3 mm Auxiliary connectors
- Water max. temperature 90°C
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
Water valve for a commercial dishwasher, restaurant appliance, coffee machine or other appliance. Single coil straight solenoid valve. Replace parts 0E5070, 07800E5070, 70210E5070, 7I0E5070. Suitable for e.g. many Electrolux and Zanussi dishwashers. 3120512
- Coil 24Vac 50 / 60Hz (alternating current)
- Input 3/4 "
- Output 14 mm 180 °
- 6.3 mm abiko connectors
- Maximum water temperature 90 ° C
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
Water inlet valve 068000 for commercial appliances. Two-coil model, outputs straight back in relation to the inlet. Replaces e.g. Animo 02158.
- 220 / 240V 50 / 60Hz
- max. temperature 90 ° C
- Inlet 3/4 "
- two Outlets ø 13.5 mm
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
Comemrcial dishwasher overflow pipe and seal. Length 187 mm, diameter 40 mm. 500618, 5210131, 5210158. Fits Dihr GS45, GS50, Metos MM2, Aqua 50, Aqua 80 models.
Estimated delivery time: 4-10 business days.
Commercial dishwasher water solenoid valve. 230V 50/60Hz - max. temperature 60°C inlet 3/4" - outlet ø 3/4". Fits for many Universal dishwashers.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
180° water valve for commercial dishwasher / appliance. Input 1/2" male thread, output 1/2" male thread (outer diameter of the thread approx. 20 mm). 230V ac 50 / 60Hz. Maximum water temperature 90 °C.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 7-14 business days.
Solenoid valve repair kit 048046 for Müller valves. Star on the membrane, height 8 mm.
Estimated delivery time: 4-10 business days.
Rubber connection sleeve for commercial hood type dishwasher. Connects washing pump to the water spray arms. Replaces part 0L2825. Inner diameter 50 / 45 / 50 mm, outer diameter 60 / 55 / 60 mm. Fits many Electrolux EHT8, NHT8 series hoods.
Estimated delivery time: 2-10 business days.
Support tube for the upper shower arm of a hood-type commercial dishwasher. Grey plastic. This part brings water to the washing spray arm on the roof of the machine and supports the arm. Includes a seal between the rear wall of the machine and the bracket. Replaces part 69017. Fits many Colged River, Elettrobar Niagara models. Check the fit table for your model.
- Plastic M6 thread for arm axle
- Length 310 mm
- Wall mounting 72 x 120 mm
Estimated delivery time: 2-10 business days.
Professional dishwasher upper spray arm distributor. See list for compatible models.
Estimated delivery time: 2-7 business days.
The lower hub of the washing arms of a commercial dishwasher. Light plastic. In this part, there is also a connection for the water hose of the upper platform. Fits many hood type Elettrobar Niagara, River, Colged Gold GL, Steeltech, Protech, Neotech, Toptech dishwasher. Check the fit for your model in the fit table.
Estimated delivery time: 4-10 business days.
Lower hub seal 80182 for a commercial dishwasher. Flat rubber seal 61 x 47 x 2 mm. Between the bottom hub and the bottom of the machine's washing compartment. Fits many Elettrobar Niagara, River, Colged Gold GL, Steeltech, Protech, Neotech, Toptech cup counters. Check the fit for your model in the fit table.
Estimated delivery time: 4-10 business days.
The overflow pipe for the basin of a commercial dishwasher. Grey plastic. Maximum length 385 mm. Outer diameter 39 mm. O-ring seal included. Suitable for Electrolux Professional hood type dishwashers NHT8, KHT8, EHT8, ZHT8I, AHT8I, EHT8I, ZHT8TI, EHT8TI with free flow drain.
Estimated delivery time: 4-10 business days.
Washing machine or dishwasher drain pump housing. Inlet 24 mm, outlet 22 mm at a 90 degree angle. Fits to screw-mounted drain pumps with a 60-61 mm sealing surface, e.g. Washing machine drain pump, universal model (screw-mounted)
- Input outer diameter 24 mm
- Output outer diameter 22 mm
- Inner diameter for the sealing surface of the pump 60 mm
Estimated delivery time 2 - 4 business days.
The washing tower supporting the lower shower arms of the commercial dishwasher. 94 mm. The plastic part in the center of which the axis of the shower arms is centered (does not include the axis). Thread on the bottom for connection to the lower coupling. Replaces parts 560004, 560024. Fits many Dihr Tekno6, Metos Metosmaster 2.
Estimated delivery time: 4-10 business days.
Shaft 15300 supporting the shower arms on the underside of the commercial dishwasher. Thread on the underside for connection to the lower coupling. Fits many Dihr Tekno6, Metos Metosmaster 2.
Estimated delivery time: 4-10 business days.
The bottom well / pump sump of a commercial dishwasher. Plastic. Original spare part for several Meiko models, e.g. 545D, DV40T, DV80T, Ecostar, Ecostar 545.
Estimated delivery time: 4-10 business days.
The overflow tube of a commercial dishwasher. Plastic. Original spare part for several Meiko models, e.g. 545D, DV40T, DV80T, DV120T, Ecostar, Ecostar 545, EcoStar545D-M-FA.
- Maximum length 256 mm
- The outer diameter of the lower part at the end is 33.5 mm
- Hat diameter 46 mm
- Diameter at the protrusions of the upper part 40 mm
Fits for Pump Sump 8004720
Estimated delivery time: 4-10 business days.
Commercial hood type dishwasher water valve. See list for compatible models.
- 230V, 50/60 Hz
- 180°, inlet 3/4", outlet 10,5 mm
- Max temperature 90°C
- Operating pressure 0,2...10 bar
Estimated delivery time: 4-10 business days.
Commercial diswasher pressure switch 250V / 16(4)A / 250/130-390mbar. See list for compatible models.
Estimated delivery time 2 - 4 business days.
| 31 - 60 of 68 results |
|
