Print

Tiivisteet_reikaelevyt_ja_muut


Display per page
Sort by
101 - 150 of 162 results
Product no.: KW712145

Kitchen machine cogged gear wheel pair with axle. Original spare part for many Kenwood Prospero KM240, KM260, KM280 -series models.

Product no.: KW712146

Kitchen machine axle end drive head. Attachment with left handed thread. Original spare part for many Kenwood Prospero KM240, KM260, KM280 -series models.

Product no.: KW715880

Meat mincer feeder screw X1-2 / X1-1. Original spare part for Kenwood KAX950ME AW20011012 meat grinder.

Notice. plastic mincer feeder screw can't be replaced with this one.

Product no.: KW684480

Meat mincer sausage horns. Including centering disc to replace hole disc & two different sized horns for making sausages. Original spare part for Kenwood meat mincers KAX950ME AW20011012, AT940, AT950, A920 & kitchen machines MG480 , MG510, MG517.

  • The diameter of the outer edge of the funnel is 63 mm
  • Outer diameter of the centering plate 65 mm
  • Center hole 9 mm
  • Centering plate thickness 7 mm
  • The inner diameters of the ends of the funnels are 10 mm and 19 mm
  • The length of the funnels is 143 mm
Product no.: KW684478

Meat mincer push rod for feeding the meat. Openable lid. Original spare part for many Kenwood KAX950ME (AW20011012), AT950A (AWAT950B02), KAX950A, A950, AT950, A950A, AT940 -meat mincers & MG450, MG470, MG480, MG510, MG511, MG515, MG517 -machines.

Product no.: KW715879

Meat mincer body part. Aluminium, not dishwasher proof. Original spare part for Kenwood KAX950ME (AW20011012) -mincer.

Product no.: KW715968

Blender gasket between blade unit & jug. Inner diameter 66 mm. Original spare part for blender KW715833 & models KHH301WH, KHH326WH.

Product no.: KW710245

Planetary wheel for kitchen machine, original spare part. Replaces part KW609777.

Product no.: KW710714

Blender output drive head. Original spare part for many Kenwood BL700, BLX5, BLX6 -series models.

Product no.: KW715263

Kitchen machine whish attachment / planetary wheel. Original spare part for many Kenwood Major KM630, KM640, KM760, KMM700 -series models.

Product no.: KW650300

Kitchen machine rubber feet. Including five pads. Original spare part for many Kenwood Major KM -series models.

Product no.: KW713375

Kitchen machine top frame locking pin / axle. Including chromed shaft, plastic piece, spring & locking ring. Replaces older spare part KW669167. Original spare part for many Kenwood Major KM -series models.

Product no.: KW714245

Kitchen machine drive shaft for vegetable cutters AT647, KAH647PL. Fits many Chef, MajorTitanium and Cooking Chef models with two top power outlets on. This shaft is only suitable for power take-offs with a triangular shaped drawbar. Original spare part, check the compatibility with your device in the model view.

Product no.: 5332108700

Water tank seal, original spare part. See list for compatible models.

Product no.: KW706991

Meat mincer medium hole disc for many models. Original spare part. 

  • Total diameter 53 mm
  • Diameter from cut off 49 mm
  • Thickness 5 mm
  • Middle hole diameter 8,3 mm
  • Cutting hole diameter 4,5 mm

Replacing hole disc KW715694.

Product no.: KW707127

Meat mincer coarse hole disc for many models. Original spare part.

  • Total diameter 53 mm
  • Diameter from cut off 49 mm
  • Thickness 5,3 mm
  • Middle hole diameter 8,3 mm
  • Cutting hole diameter 6,1 mm
Product no.: KW644959

Multimixer drive belt 600-3KC-6, original spare part. See list for compatible models!

Product no.: KW712673

Feed tray / top plate of the meat grinder. Attached to the top of the meat grinder. The outer diameter of the feed opening is 47 mm. Original spare part for Kenwood AT955, MG700, MG710, MG720 models.

Product no.: KW715557

Meat grinder sausage funnel set. Grey plastic. Includes two sausage horns and a Kebbe squeezer. Original spare part for a few Kenwood MG350, MG360 series models.

  • Maximum funnel / guide diameter 59 mm
  • The inner diameters of the ends of the funnels are 10 mm and 18 mm
  • Funnel length 138 mm
  • Kebbe extruder diameters 23 mm 32 mm
Product no.: KW717212

Multimixer gear wheels, bigger and smaller. Original spare part. See list for compatible models!

Product no.: KW717121

Multimixer seal, original spare part.

Product no.: KW715647

Portable mixer motor unit, original spare part for some HDP40-series models.
 

Product no.: KW713873

Blender/mixer seal, original spare part for many BL700- and BLP600-series models. See list for compatible models.

Attention! the same blenders are made with different sized jugs and seals. The dimensions of this gasket are:

  • Outer diameter 87 mm
  • Inner diameter 69 mm
Product no.: KW714287

Food processor drive shaft, original spare part. See list for compatible models.

Product no.: KW715549

Food processor mincer hole disc, original spare part. See list for compatible models.

Product no.: KW710638

Primary drive gear located between the kitchen machine motor and the gearbox. Transmits power from the motor's worm wheel to the gearbox. Metal. Diameter 45 mm, thickness 10 mm. Number of Teeth 40. Original spare part for many Kenwood Kmix KMX50-KMX99 series models. Check the fit table for your model.

Product no.: KW710630

Kitchen machine motor. At the end of the shaft is a worm wheel through which the force is directed to the gearbox. Original spare part for many Kenwood Kmix KMX50-KMX99 series models (not suitable for KMX75 model). Check the fit table for your model.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: KW716784

Food processor drive shaft, original spare part. Colour white. Length 160 mm. See list for compatible models.

Product no.: KW714493

Planet wheel of a kitchen machine. Original spare part for many Kenwood KMX series models. Check the fit table for your model.

There may be a delay in the availability of this part.

Product no.: KW710657

Whisk shaft for a food processor. Made of steel. Includes washer and nut. Original spare part for many Kenwood KMX series models.

Product no.: KW712341

Vegetable slicer extension chute for Kenwood AT340. Original spare part.

Product no.: KW712340

Vegetable slicer cabinet for model AT340. Original spare part.

Product no.: KW710611

Rubber foot for the kitchen mixer. Includes five rubber feet. Original spare part for many Kenwood KMX series models. Check the fit table for your model.

Product no.: KW650180

Plug and seal in the universal machine gearbox. Cap in white plastic and black rubber seal. Original spare part for many Kenwood Chef models. Check the fit table for your model.

Note. There may be a delay in the delivery of this product.

Product no.: KW713281

Kitchen machine motor 230V. Includes a nylon pull head (which is often broken due to the use of a blender). Original spare part for many Kenwood Chef Premier and Major Premier models. Check the suitability for your model in the compatibility table on the bottom of the device.

Product no.: KW717144

Blender bottom seal, original spare part for model KAH359GL.

Product no.: AW20010016

Juicer to be connected to the slow power take-off of a food processor. Purejuice Slow Press Juicer KAX720PL. Attached to the power take-off at the front of the kitchen machine. Thrust-operated. Suitable for making fruit, berry and vegetable juice and making almond milk. A juice jug and a cleaning brush are included. Fits directly on Kenwood KMX, KVC, KVL series models and older Major / Chef models with KAT001ME adapter.

Product no.: KW714207

Citrus press cone for kitchen food processor. Fits Kenwood Prospero KM240, KM280 series machines and AT284 multi-purpose bowl and citrus juicer KW714205.

Product no.: KW714422

Meat grinder metal plate (medium). Original spare part for AT955, MG700, MG710 and MG720 meat grinders.

  • Diameter 69 mm
  • Height 6,7 mm
  • Center hole 9,6 mm
  • Hole diameter 4,5 mm
Product no.: KW714421

Meat grinder fine metal plate. Original spare part for MG700, 710 and 720 meat grinders.

  • Total diameter 70mm
  • Holes 3mm
Product no.: KW714420

Meat grinder coarse metal plate. Original spare part for MG700, 710 and 720 meat grinders.

  • Total diameter 70mm
  • Holes 8mm
     
Product no.: KW712650

Meat grinder motor UG-30R. 230V ac 50Hz. Original spare part for Kenwood MG700, MG710, MG720 models.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: KW714302

The center / cone of the citrus squeezer of the kitchen machine. Grey plastic. Original spare part for some KHH30 Multione, KHH32, FPP235 series models. Check the fit for your model in the fit table:

FPP235 0WFPP23502 
KHH300WH 0W20010013 
KHH301WH 0W20010013 
KHH301WH 0W20010041 
KHH326WH 0W20010001 
Product no.: KW712682

The body part of the meat grinder. Aluminum (not dishwasher safe). Does not include the blade fixing nut (available separately: KW712680). The original spare part, e.g. Kenwood MG700, MG710, MG720 for meat grinders.

Product no.: KW712680

Tightening nut for the perforated plate to be screwed into the body part of the meat grinder. This part locks the hole disc against the blade and pusher pulley. Aluminum, not machine washable. Original spare part for Kenwood AT955, MG700, MG710, MG720 models.

Product no.: KW714170

Multi mixer rubber feet set, original spare part. Fits models KM241-245, KM280-288 etc. See list for compatible models.

Product no.: KW675025

The drive end located at the end of the motor shaft of the kitchen universal machine. Plastic, attached to the motor shaft with the supplied cotter pin. The gear part rotates the slower power take-off, the crosshead at the end rotates the blender blade. Original spare part for many Kenwood Major, Cooking Chef, Chef XL, XL PRO series models and motors KW716659, KW674760. Check the compatibility with your model in the compatibility table with the information on the model sticker found on the bottom of your device.

  • Total length 40 mm
  • Inner diameter 8 mm
  • Outer diameter of tooth ring 21 mm
  • Cross 13.5 x 13.5 mm
  • Cotter pin 16 x 3 mm
Product no.: KW714310

The motor of a blender or a small Food Processor universal machine. Original spare part for many Kenwood Multipro Compact FPM, FPP series models. Check the compatibility with your model in the compatibility table with the information on the model label found on the bottom of the device.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: KW674992

High speed power outtake attachment bracket located on top of the kitchen appliance. A dark grey plastic part attached to the machine with two screws, where the protrusions on the bottom of the blender or other accessory lock. Fixing screws are not included in the delivery. Original spare part for many Kenwood Major and Cooking Chef KM, KMC, KMM series models. Check the suitability for your model in the suitability table using the model marking found on the bottom of the machine.

Note! not suitable as a mounting plate for a slower PTO!

Product no.: KW660018

Carbon brushes and their springs for the motor of the kitchen universal machine / food processor. Abiko flat connectors. Original spare parts for many newer kenwood Chef and Major KM, KCM, KMM, PM series models and motor KW713281.

  • Lenght 27 mm
  • Width 8 mm
  • Thickness 5 mm
  • Connector 6,3 mm AMP
101 - 150 of 162 results