Front page Home appliance spare parts Central vacuum cleaner Allaway spare parts & accessories
Allaway spare parts & accessories
Central vacuum cleaner circuit board and RC transmitter part. Original spare part for many Allaway CX, CXA, PM series models, e.g. C-1750-CA-02.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
293.00 €
Estimated delivery time: 7-14 business days.
Central vacuum cleaner suction hose handle. Steel, threaded connection to hose. Suitable for 32mm round telescopic tubes and nozzles. Compatible with hoses without handle starter / electric cord inside. Original Allaway spare part.
- Thread diameter at the base 32.5 mm
- Top thread diameter 36 mm
- Total length 410 mm
- The outer diameter of the joint is 32 mm
49.90 €
Estimated delivery time: 4-14 business days.
Combi floor nozzle for central vacuum cleaner or vacuum cleaner. Button-selectable functions for hard floors and carpets. Bristles clean hard surfaces such as tile floors, parquet, wood floors and laminates. The chromed steel surface slides well on a variety of carpet surfaces. Fits all suction hoses and telescopic arms with a 32mm round pipe connection, e.g. Aertecnica, Beam, Allaway, Puzer, Fresco Futura, Everything, Electrolux. Replaces Beam 045-175
- Overall width 270 mm
- Minimum height approx. 75 mm
- Inner diameter of the connecting pipe 32 mm
26.90 €
Estimated delivery time: 2-10 business days.
Central vacuum cleaner motor 1380W 230V. Original spare part for Allaway AW 1900 (V-1900-AA-00, V-1900-AA-02).
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
358.00 €
Estimated delivery time: 4-10 business days.
Carbon brushes for central vacuum cleaner motor. Original spare part for Allaway AW 1900 (V-1900-AA-00, V-1900-AA-02) vacuum cleaners and motor 10137V.
- Carbon dimensions 11 x 8 mm
- Carbon length as new 28 mm
- The length of the plastic case is 39 mm
- Maximum width of the plastic case 20 mm
- The total length of the case from the rear to the end of the brass part is 44 mm
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
31.90 € / pair(s)
Estimated delivery time: 4-10 business days.
Allaway central vacuum cleaner wall inlet outer frame for recessed mounting. White plastic. Fits Allaway classic wall inlet (80175V). Original Allaway spare part. Dimensions 132 x 95 x 16 mm.
14.90 €
Estimated delivery time: 4-14 business days.
Central vacuum cleaner foam filters. Original spare part for Allaway KaikkoPois KP-1200, KP-1400, EE-22 series models. The package contains two pieces of filters. LVI-number 6901374.
Dimensions of one filter:
- Diameter 160 mm
- Hole diameter 60 mm
- Height 103 mm
41.90 € / pair(s)
Estimated delivery time: 7-14 business days.
Silencer for the exhaust air of the central vacuum cleaner. Fits black Allaway 44 mm piping. Install the muffler as close as possible to the outlet of the exhaust air pipe (furthest from the vacuum cleaner). Outer diameter 8.5 cm, length 32.3 cm.
55.90 €
Estimated delivery time: 7-14 business days.
Allaway central vacuum cleaner set of cleaning tools:
- hose with handle start 10 m
- telescopic tube 32 mm
- floor nozzle 32 mm
- parquet tool 32 mm
- furniture tool 32 mm
- slot nozzle 32 mm
- brush nozzle 32 mm
Hose length 10 meters. Hose wall connector with a diameter of 37/38 mm, the length of the part protruding into the wall is 21 mm. The handle part fits all telescopic tubes and nozzles with a 32 mm connection. Fits Allaway box 80175V.
346.00 €
Estimated delivery time: 2-14 business days.
Main circuit board LCD2010CR (7A) for Allaway C40 Premium LCD-model. Original spare part.
Following parts are also compatible with C40 Premium LCD-model:
273.00 €
Estimated delivery time: 4-14 business days.
25-pin 400 mm ribbon cable between PCB 10100GV-AW and display panel 15441. Fits Allaway C40 Premium LCD-model.
Original Allaway spare part.
41.90 €
Estimated delivery time: 4-14 business days.
Central vacuum cleaner LCD-panel for Allaway model C40 Premium. Original Allaway spare part.
Following parts are also compatible with C40 Premium LCD-model:
192.00 €
Estimated delivery time: 4-14 business days.
Central vacuum cleaner motor carbon brushes Ametek 833410-53, fits Ametek / Lamb -motors 115950, 117743-00, 117157-00, 117201-00. Replaces Allaway original part 10129V used in models KP1200 and KP1800.
30.90 € / pair(s)
Estimated delivery time 2 - 4 business days.
Central vacuum system motor wire kit, includes 2 pcs of wires 420 mm (flat connectors 4.8 x 0.5 & 6.3 x 0.8 + covers). Needed for repairing Allaway LCD -appliances in addition to motor repair kit 10277S. Original Allaway spare part.
16.90 €
Estimated delivery time: 4-10 business days.
Central vacuum cleaner dust chamber guide cone for 20L canister, original Allaway spare part. This part leads larger particles to the bottom of the dust chamber. Grey plastic. Replaces part 10885V. See list for compatible models.
22.90 €
Estimated delivery time: 4-10 business days.
The frame of the wall sleeve of the handle-activated suction hose of the central vacuum cleaner. A sleeve with a locking cam for the hose wall connector. Includes gasket. Suitable for Allaway ON/OFF handle start suction hoses from 2004 onwards, e.g. 81226, 81211, 81227, 81210, 81242.
- Inner diameter 44 mm
- Inner diameter at the end 38 mm
- Height 39 mm
- The distance between the locking claws is 58 mm
15.90 €
Estimated delivery time: 4-10 business days.
Central vacuum cleaner dust bag installation kit. It makes the central vacuum cleaner hygienic and easy to empty. When using a dust bag, the need for fine filter maintenance is reduced. A dust bag is especially recommended for homes with pets. Fits many Allaway central vacuum cleaners from 2002.
The dust bag installation kit includes:
- 2 pcs Microfibre dust bags 13 litres
- Suction unit
- Bag holder
Fits Allaway models: C series, DV30
83.90 €
Estimated delivery time: 4-10 business days.
Allaway vacuum cleaner holder covers. You can use these to cover the holes. Includes 2 pcs.
14.90 € / pair(s)
Estimated delivery time: 4-10 business days.
9.90 €
Estimated delivery time: 7-14 business days.
Central vacuum cleaner motor rubber top seal 11455V and seal mounting ring 10404V. Seal dimensions: Outer diameter 162 mm, Inner diameter 108 mm, Height 8 mm. Fits motor 10135S, all Allaway CA, CV, CX, CXA series models, BA30, PM30 series before 2009, PM300 series before 2004.
22.90 €
Estimated delivery time: 7-14 business days.
Central vacuum cleaner handle part for handle-started hose STD-2 model 1. Start button. The handle tube fits a 32 mm round tube. Original spare part for Allaway Classic hoses Standard 10 m 81227 / 81227V, Standard 9 m 81226 / 81226V (see the picture that your old handle looks exactly the same).
- One hole for the hose mounting sleeve
- Distance of low-current contacts 12.5 mm
If your handle has contacts at a distance of 35 mm, choose the handle version STD-2 model 2
99.00 €
Estimated delivery time: 4-14 business days.
Central vacuum cleaner hose handle with start&stop function. Original spare part for B050-090, B050-105, B050-120 -hoses. Also replaces the handle Allaway 10751BV STD-2 model 2, fits classic hoses Standard 10 m 81227 / 81227V, Standard 9 m 81226 / 81226V (see the picture that your old handle looks exactly the same). We do not guarantee compatibility with other hose models. Fits 32 mm diameter telescopic tubes. Take the screw for the cover located below from the old handle, it is not supplied with the handle.
- Distance between electrical connections 35 mm (check that the sliding surfaces of the hose are at the same distance)
- One hole for the hose mounting sleeve
If your handle has contacts with a distance of 12.5 mm, choose the handle version STD-2 model 1
79.90 €
Estimated delivery time: 2-14 business days.
51 - 72 of 72 results |
|