Front page Home appliance spare parts Vacuum cleaner Accessories
Accessories
Loads of spares for vacuum cleaners.
Robot cleaner maintenance kit ERK3, original spare part. Includes following parts:
- 3 x side brush
- 3 x filter
- 1 x brush roll
80.90 €
Estimated delivery time: 2-7 business days.
Locking part of the floor nozzle of the battery-operated arm vacuum cleaner. This part locks the rotating brush in place on the nozzle. Original spare part for many AEG Electrolux ZB100, ZB3000, ZB5000, ERGO, EER series models. Check the suitability for your model with the PROD / PNC number on the vacuum cleaner bottom in the suitability table.
13.90 €
Estimated delivery time: 2-7 business days.
Robotic vacuum cleaner service set. Includes 2 filters, 2 side brushes, 1 brush roller, 1 rubber roller and roller cleaning tools. Fits many iRobot Roomba 600 series models. Check the fit table for your model.
47.90 €
Estimated delivery time: 4-10 business days.
A rubber roller rotating under a robot vacuum cleaner. Fits many iRobot Roomba 500, 600, 700 series models.
17.90 €
Estimated delivery time: 4-10 business days.
Rotary brush roller for robotic vacuum cleaner. Fits many iRobot Roomba 500, 600, 700 series models.
19.90 €
Estimated delivery time: 4-10 business days.
Robotic vacuum cleaner filter. Fits many iRobot Roomba 500 and 600 series models.
12.90 €
Estimated delivery time: 4-10 business days.
Robotic vacuum cleaner rotating brush roller bearings. The set includes 10 bearings. Fits many iRobot Roomba 600 series models.
28.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner front wheel and axle. Replaces part 09082132. Original spare part for many Hoover Sensory, Telios series models. Check the fit for your model in the fit table.
34.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner motor carbon brush. Sold individually. Original spare part for many AEG Vampyr -series models. Replaces Nilfisk GD 930S/S2 carbon brush 1407719000.
- Carbon thickness: 6.5mm
- Carbon height: 11mm
- Carbon length: 32mm
- Case length: 37mm
- Electrical connector: 4.8mm
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
27.90 €
Estimated delivery time: 2-7 business days.
Robotic vacuum cleaner left (L) drive gear; driving wheel and motor. Original spare part for many Samsung VCR8930, VCR8940, VCR8950, VCR8980, VC-RM, VR10F71U series models. Check the fit table for your model.
124.90 €
Estimated delivery time: 4-10 business days.
Robotic vacuum cleaner right (R) drive gear; driving wheel and motor. Original spare part for many Samsung VCR8930, VCR8940, VCR8950, VCR8980, VC-RM, VR10F71U series models. Check the fit table for your model.
124.90 €
Estimated delivery time: 4-10 business days.
Pedals / buttons on top of the vacuum cleaner. Blue / orange color. Original spare parts for a few Electrolux UltraSilencer Energy Saver models. Check the suitability for your model with the PROD / PNC number of the vacuum cleaner base in the suitability table.
17.90 €
Estimated delivery time: 2-10 business days.
Central vacuum cleaner dust chamber seal, original spare part for models SC335 and 2100EA.
26.90 €
Estimated delivery time: 4-10 business days.
Bagless vacuum cleaner dust container. Transparent plastic. Original spare part for Electrolux Mobilite ZML8805EL (Product number 900258085) and ZML8805EL (Product number 900258148). Check the suitability for your model with the PROD / PNC number on the bottom of the vacuum cleaner.
31.90 €
Estimated delivery time: 2-10 business days.
Vacuum cleaner motor carbon brushes (2 pcs), replaces Kärcher 6.610-204.0. Fits Kiekens 1081212 motor.
- Casing length 43,9 mm
- Casing heigth 12,7 mm (21,5 mm with connector)
- Casing thickness 9,9 mm
- Carbon length 29,5 mm
- Carbon heigth 11,3 mm
- Carbon thickness 6,3 mm
20.90 €
Estimated delivery time: 2-7 business days.
Central vacuum cleaner black plastic cover, original spare part. Fits KP1500, KP1800 etc.
18.90 €
Estimated delivery time: 4-14 business days.
Body of the handle at the top of the handle of the cordless vacuum cleaner. From this part, the mating piece of the locking holding the vacuum cleaner part in the upper position is often broken, and the vacuum cleaner part no longer remains in the upper position. Dark grey plastic. Original spare part for many electrolux Pure F9 FlexLift PF91 series models. Check the suitability for your model in the compatibility table with the PROD / PNC number on the body under the vacuum cleaner dust container.
Handle bottom cover 140070698026 available separately.
18.90 €
Estimated delivery time: 2-10 business days.
Vacuum cleaner front wheel. Original spare part for many AEG ACE, AJM, ASP, AUF, LX, VX, AAC, AAM, AVQ, Vampyr, Electrolux EL, ESC, EPF, ESP, EUS, EUF, XXL, Z8000, ZAC, ZAM, ZCS, ZCX, ZE , ZP, ZSC, ZUA, ZUF, ZUP, ZUS, Volta Bolido, U4500, U7500 series model. Check the fit table for your model.
12.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner front wheel holder. Original spare part for many AEG ACE, Vampyr, AUS, AJM, VX, LX, ASP, Electrolux ESP, ZSP, EUS, ZUS, ZUF, ZSP, EUF, ZE, ZUA, ZUP, ZSC, XXL, Z8000, Volta 4500, Bolido, U4500, to the U6000 series model. Check the fit table for your model.
15.90 €
Estimated delivery time: 2-10 business days.
Motorized drive wheel of the robot vacuum cleaner on the right side (R). Original spare part for many Samsung VR20H9, VR20J9, VR2A series models. Check the fit table for your model.
134.90 €
Estimated delivery time: 4-10 business days.
Motorized drive wheel of the robot vacuum cleaner on the left side (L). Original spare part for many Samsung VR20H9, VR20J9, VR2A series models. Check the fit table for your model.
136.90 €
Estimated delivery time: 4-10 business days.
AEG / Electrolux vacuum cleaner valve flap buffer, original spare part. See list for compatible models.
6.90 €
Estimated delivery time: 2-7 business days.
Vacuum cleaner pad filter holder. Yellow plastic. Fits many Dyson DC07, DC08, DC19, DC20, DC29 series models.
6.90 €
Estimated delivery time: 4-10 business days.
Bagless vacuum cleaner dust chamber, original spare part. See list for compatible models.
41.90 €
Estimated delivery time: 2-7 business days.
Vacuum cleaner hose connector seal, original spare part. See list for compatible models!
13.90 €
Estimated delivery time: 2-7 business days.
Vacuum cleaner power supply, original spare part. See list for compatible models.
- Voltage in 100-240V AC
- Voltage out 21,7 V DC
- Max current 0,55A
- Power 38 W
- Plug 5,5 x 2,1 mm without central pin
56.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner tube conversion adapter. This sleeve allows you to connect nozzles with a 32mm round tube to a vacuum cleaner with a 35mm round tube. Manufactured by Wessel-Werk 13.1580-300. Suitable for e.g. Miele, Bosch, Siemens, Electrolux, AEG, etc.
7.90 €
Estimated delivery time: 4-10 business days.
Battery powered vacuum cleaner power supply SIC-290075EU. Fits for many Rowenta, Tefal, OBH Nordica models. See list for compatible models.
- Voltage in 100-240 V AC
- Voltage out 29 V DC
- Max current 0,75 A
- Power 21 W
- Plug 5,5 x 2,5 mm, length 53 mm (no central pin)
38.90 €
Estimated delivery time: 2-7 business days.
Cover for the battery compartment on the handle of the vacuum cleaner hose. Original spare part for many Nilfisk Elite, Select series models. Check the fit table for your model.
16.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner shaft attachment part, original spare part. Replaces part 432200534271.
See list for compatible models.
17.90 €
Estimated delivery time: 4-10 business days.
Motorized drive wheel of the robot vacuum cleaner on the right side (R). Original spare part for many Samsung Powerbot VR10M, VR1A, VR1D, VR1F, VR1G series models. Check the fit table for your model.
102.90 €
Estimated delivery time: 4-10 business days.
Motorized drive wheel of the robot vacuum cleaner on the left side (L). Original spare part for many Samsung Powerbot VR10M, VR1A, VR1D, VR1F, VR1G series models. Check the fit table for your model.
102.90 €
Estimated delivery time: 4-10 business days.
Wheel and shaft on the front of the floor nozzle of the cordless vacuum cleaner. When worn, this wheel can cause the nozzle to suck into the floor. Original spare part for many Electrolux Pure F9 PF91 series models. Check the fit table for your model.
Axle material may be plastic or metal depending on availability.
15.90 €
Estimated delivery time: 2-7 business days.
Vacuum cleaner motor carbon brushes. Contains two pieces. Suitable for e.g. many Nilfisk vacuum cleaners. Carbon dimensions 9 x 6 mm, carbon length 27mm.
20.90 € / pair(s)
Estimated delivery time: 2-10 business days.
Vacuum cleaner motor carbon brushes. Contains two L63F12 carbons. To be soldered to the old carbon connector. Suitable for e.g. for many Nilfisk GD930 and Electrolux Euroclean UZ930 vacuum cleaners. Carbon dimensions 9 x 6 mm, carbon length 27mm.
50.00 € / pair(s)
Estimated delivery time: 4-10 business days.
Vacuum cleaner rear wheel. Original spare part for many Electrolux Ultra One Mini UMORIGIN, ZUOM series models. Check the fit of your model in the fit table with the PROD / PNC number on the bottom of the vacuum cleaner.
31.90 €
Estimated delivery time: 2-7 business days.
Locks are located at the end of central vacuum cleaner support rail. Original spare part. Dark gray colour. Included in supporter kits 15189BS and 15195V.
12.90 €
Estimated delivery time: 4-10 business days.
Central vacuum cleaner LCD unit / control panel. Original spare part for Beam Platinum SC395, SC395EB, SC398, SC398EB models with diameter of 38 cm.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
337.00 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner suction hose end collar. This part is located between suction hose and handle. Maximum diameter 45 mm, height 24 mm. Counterclockwise thread for 38 mm hose.
3.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner handle lock ring. Black plastic, outer diameter 50 mm. This part locks handle to hose end collar.
3.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner socket kit, IEC-connector C18. Original spare part, see list for compatible models.
33.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner motor carbon brush 230240. Sold individually. Original spare part for many Numatic Henry models and Ametek 205403 DL21104T (230V) motor.
- Carbon thickness: 6.3 mm
- Carbon width: 10.9 mm
- Carbon length: 32.5 mm
- Housing length: 45.2 mm
- Electrical connector 6.3 mm Abiko
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
22.90 €
Estimated delivery time: 4-10 business days.
Plastic fasteners / locking clamps for the vacuum cleaner motor unit and the dust container below it. Original spare part for a few Nilfisk Multi II series models:
- MULTI II 22 INOX 18451551 NILFISK
- MULTI II 30 T 18451556 NILFISK
- MULTI II 30 T INOX VSC 18451553 NILFISK
- MULTI II 50 18451554 NILFISK
15.90 € / pair(s)
Estimated delivery time: 4-10 business days.
Robot vacuum cleaner brush roller cover, original spare part. In some models, this has been replaced by part 4060002021 from certain serial number. To ensure compatibility, please send us a picture of the product sticker under your robot cleaner.
9.90 €
Estimated delivery time: 2-7 business days.
Vacuum clener telescopic tube lower end plastic part that connects tube and nozzle. Original spare part.
13.90 €
Estimated delivery time: 4-10 business days.
6.90 €
Estimated delivery time: 2-7 business days.
Lock between vacuum cleaner telescopic tube and nozzle, original spare part. Fits Allaway Premium tube 81051.
13.90 €
Estimated delivery time: 4-10 business days.
Vacuum cleaner dust container, original spare part for many ZUAG3800 series models. Replaces part 2194100455. See list for compatible models.
53.90 €
Estimated delivery time: 2-7 business days.
Vacuum cleaner carrying handle. Does not include mounting screws (use old screws). Black plastic. Original spare part for Nilfisk Terrier UZ934.
28.90 €
Estimated delivery time: 10-20 business days.
Cyclone tank for battery-operated vacuum cleaner, Cyclonic technology. Transparent plastic. Original spare part for many Hoover H-FREE 100, HF122 series models. Check the fit table for your model.
43.90 €
Estimated delivery time: 4-10 business days.
151 - 200 of 251 results |
|