Model sticker locator
Click the appliance that you have and find out where the model sticker can be found.
Model sticker locator
Your basket is empty.
Front page Home appliance spare parts Vacuum cleaner Lux vacuum cleaner parts Other parts
Other parts
Interconnecting cord between the Lux vacuum cleaner and powered turbo nozzle. Length 210 cm. Suitable for brush tools ZE3, ZE3.1, PB1 and vacuum cleaner LUX 1R D820. Connector 15 x 24 mm, slanted wires 2 pcs 2 x 6 mm. Includes three plastic clips for attaching the cord to the pipe.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner power cable. 9m / 2 x 0,75mm2. Flat outer sole. Abiko-connectors. Fits Lux D820 1R D740 etc.
Estimated delivery time: 2-7 business days.
Vacuum cleaner front wheel. Original spare part for Lux D750-D790 models. Wheel width 10mm, diameter 30mm.
Estimated delivery time: 2-7 business days.
Estimated delivery time: 2-14 business days.
LUX vacuum cleaner ZE 3 carpet brush turbo nozzle motor. Original spare part for many ZE3 & ZE3.1 -models.
Estimated delivery time: 2-7 business days.
LUX D820 (1 Royal) vacuum cleaner's PB 1 carpet brush nozzle's drive belt. lenght 178mm, W 3,8mm. 185-23-110 24/12.
60 "teeth"
Estimated delivery time 2 - 4 business days.
Vacuum cleaner main power switch. Accessory model, replaces switches Miele 4367102, 9023230, 9023231, 1681.3103, 16813103, Electrolux 1050326030, 4055009932, Candy Hoover 49025425. Fits many Electrolux, Lux, Miele models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Vacuum cleaner main circuit board. Electrolux 1131717033. Note! This board has nine LEDs. The card is the newer version without main switch, you can order one here: Lux D820 (1R) virtakytkimen korjaussarja. Original spare part for few LUX 1R Royal (D820) -models.
Estimated delivery time: 2-10 business days.
Currently unavailable
Lux 1R D820 vacuum cleaner power switch may come off the circuit board connections and the machine stops running. The circuit card does not need to be changed; this power switch kit is a repair kit to replace the broken switch.
Estimated delivery time: 1-10 business days.
Vacuum cleaner motor for Nilfisk GD 930 panther & Electrolux EuroClean UZ 930 -models. 1000W 240V. Alternative part. Attachment with one spring on the center. Total height 180mm, turbine chamber height 68mm, bottom diameter 131mm, max diameter 145mm.
Currently unavailable
Vacuum cleaner output filter cover. Blue plastic. Original spare part for LUX D820 Royal 1R -models. 1050153012
Estimated delivery time: 2-14 business days.
Vacuum cleaner output filter cover handle. Springs not included. Original spare part for LUX D820 Royal 1R -models.
Estimated delivery time: 2-14 business days.
Vacuum cleaner turbo nozzle drive belt. Between motor & brush roll. Original spare part for LUX / Electrolux Powerlux PL1 -turbo floor tool.
- L 14,5 cm
- 50 teeth
- 110209 Germany CT HTD 150 3M 4
- 1050281-01
Estimated delivery time: 2-7 business days.
This product includes motor 1131503052 and installation kit 2196054-01.
Lux motor has been replaced by new version, and installation kit is needed to make it fit.
Fits Lux D820 1R Royal vacuum cleaner.
Estimated delivery time: 4-14 business days.
Vacuum cleaner end frame. If the suction hose gets loose from the cleaner, may the attachment points of this part have worn out. Original spare part for LUX 1R D820.
Estimated delivery time: 2-10 business days.
Vacuum cleaner base bottom part with wheels. Original spare part for Lux Intelligence AP11.
No longer available.
Replacement part: bottom
Vacuum cleaner front wheel. Including wheel, axle and wheel frame. Original spare part for LUX Intelligence AP11 model.
- Base diameter 58 mm
- For 10 mm axle
- Wheel diameter 22,5 mm
- Wheel width 15 mm
Estimated delivery time 2 - 4 business days.
Vacuum cleaner power cord winding device. Cord not included. Original spare part for Lux Intelligence AP11 -model.
Estimated delivery time: 2-10 business days.
Vacuum cleaner electric cable. Original spare part for Lux Intelligence AP11 -model.
Estimated delivery time: 2-10 business days.
Vacuum cleaner dust bag chamber lid opening & locking part. Original spare part for Lux Intelligence AP11.
Estimated delivery time: 2-10 business days.
Motor brush floor tool cable. Length 112cm. This cord fits to the floor tool itself. Original spare part for Lux PB1 -model.
Estimated delivery time: 2-10 business days.
Vacuum cleaner suction hose seal at the connection between the hose and the vacuum cleaner. Original LUX spare part for the suction hose of the 1R and D820 models.
Estimated delivery time: 2-10 business days.
Lux vacuum cleaner hose switch circuit board. Original Lux spare part for Intelligence AP11 models.
Estimated delivery time: 2-10 business days.
Vacuum cleaner suction hose handle battery cover lid. Original spare part for LUX S115 -model.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner dust chamber door opening / locking handle. Replaces parts 238277, 5615026. Original spare part for Lux Intelligence AP11 -models.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner hose handle remote controller cover. Original spare part for LUX S115 -models.
Estimated delivery time: 4-10 business days.
Original spare part, lenght 187 cm. Replaces part 1050846011.
Estimated delivery time: 14-21 business days.
Vacuum cleaner interior hull, dust bag housing / tank. Bluish plastic. Original spare part for Lux Intelligence AP11.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner turbo brush tool axle. This part is located between motor & cogged drive belt. Original spare part for Lux PB1 -floor nozzle.
- Total length 72 mm
Estimated delivery time: 4-10 business days.
Vacuum cleaner ON/OFF -button, cord winder button + springs. Dark blue plastic. Original spare part for LUX AP11 intelligence -model.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner floor tool holder. Located in the side of the vacuum cleaner. Holds floor nozzle & telescopic tube upright when cleaner is landwise. Dark blue plastic. Attachment screw not included. Original spare part for LUX Intelligence AP11 and AC11.
Estimated delivery time: 2-10 business days.
Vacuum cleaner handle & handle hole bottom cover. Dark blue plastic. Original spare part for Lux Intelligence AP11 -models.
Estimated delivery time: 4-10 business days.
Vacuum cleaner circuit board assembly Kolektor A0813A_24_02. Original spare part for Lux Intelligence AP11.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
Vacuum cleaner suction motor. Original spare part for Lux Intelligence AP11.
- DOMEL 463.3.409 I.CI.H 1840114447
- 220-240V 50/60Hz
- Base diameter 120 mm
- Total height 114 mm
- Suction opening diameter 34 mm
- Turbine edge height 30 mm
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.
Estimated delivery time: 4-10 business days.
Vacuum cleaner suction hose adapter for LUX Intelligence AP11 hose, model 1R (D820). Original spare part.
Estimated delivery time: 2-14 business days.
Vacuum cleaner rear wheel. Dark blue plastic. Replaces wheels 115840043, 115840050. Original spare part for LUX 1R Royal, D820, D790, D775, D795 series models.
Estimated delivery time: 4-10 business days.
Dust bag container lid on the front of the vacuum cleaner. Light grey plastic / steel. Includes locking part and dust container lever. Original spare part for Lux S115, also replaces the dark blue Lux AP11 Intelligence vacuum cleaner front cover 241752.
Currently unavailable
Blowing air housing around the motor of the vacuum cleaner. The valve and flaps in this section allow the fan function of the vacuum cleaner to be used. Dark blue plastic. Original spare part for LUX Intelligence AP11.
Estimated delivery time: 4-14 business days.
Turbo nozzle drive belt PB S115, original spare part.
Estimated delivery time: 4-10 business days.
Ankle part / joint of the motorized turbo floor nozzle of the vacuum cleaner. Includes wires to the brush roll tamper motor. Original spare part for Lux Power Brush (PB1) floor tool.
- Dimensions of the connection point 40 x 62 mm
- Hinge pins diameter 12 mm
- Distance of hinge pins 56 mm
Estimated delivery time: 2-10 business days.
Vacuum cleaner turbo brush tool motor. Original spare part for LUX PB1 -turbo nozzle.
Estimated delivery time: 4-10 business days.
The LED lamp of the vacuum cleaner's power nozzle. Original spare part for the Lux PB1 motorized floor tool.
Estimated delivery time: 2-10 business days.
Vacuum cleaner bottom with wheels for Lux model S115, original spare part. Colour light grey / silver.
Estimated delivery time 2 - 4 business days.
Vacuum cleaner handle holder, located between handle and hose. Original spare part for Lux Intelligence cleaner.
Estimated delivery time: 4-10 business days.
Vacuum cleaner back cover for Lux model S115. Colour light grey. Replaces former black AP11 / Intelligence rear cover that is no longer available. Press buttons not included.
Estimated delivery time: 4-10 business days.
The steel outer shell of the vacuum cleaner. Original spare part for the LUX Intelligence AP11 vacuum cleaner.
Estimated delivery time: 4-10 business days.
Power switch shaft for model Lux Intelligence AP11. Original spare part.
Estimated delivery time: 4-10 business days.
Remote controller circuit board 4000432 located on vacuum cleaner hose handle. Original spare part for model Lux S115.
Estimated delivery time: 4-10 business days.
Remote controller cover 4000332, located on vacuum cleaner hose handle. Original spare part for model Lux Intelligence AP11.
Estimated delivery time: 4-10 business days.
| 1 - 50 of 55 results |
|
