Fridge water connection kit 10m

Water connection kit for a refrigerator with a drinking water dispenser. Includes parts for connecting the refrigerator / side-by-side cabinet to the water supply network. Suitable for all LG, Samsung, Electrolux, AEG, Bosch, Siemens, Daewoo, Ariston, Hotpoint, Haier refrigerators with a 1/4" (6.35 mm) PE pipe connection in the water valve.

Contains:

• 1 pc. Tap connector 3/4" - 1/4" (6,35mm)
• 1 pc. Water pipe PE 1/4" (6,35mm), 10m
• 1 pc. Water filter 5500l

For installation, you only need cable ties to secure / support the water pipe and filter and possibly an adapter for the tap connection if your tap has a 1/2" connection.

1. The tap connector is screwed into the water network of your home, for example to the connection point made under the kitchen tap. The connection point must have a shut-off valve so that the water supply to the cabinet can be turned off, for example during a vacation or to change the water filter. It is recommended to bring the tap connection as close as possible to the refrigerator to be connected so that the length of the plastic PE pipe run will be short.
2. The PE water pipe is connected to the quick connector of the tap connector by inserting a clean and straight end of the PE pipe into the quick connector. If your refrigerator model does not have a built-in water filter, install the water filter included in the package near the tap connector (in an easily accessible and monitored place to make changing and detecting leaks easier). From the filter, continue with the PE water pipe to the refrigerator water valve.
3. The PE pipe is connected to the refrigerator water valve with the collar nut on the water valve (order separately if your cabinet does not have a nut in place). Finally, secure the water pipe and filter to the furniture and refrigerator with cable ties so that they cannot swing and hit. Replace the filter with a new one every 6 months to maintain the best filtration performance.