Spare parts

Professional / commercial washing machine drain valve rubber hose 0W2056, 432250501. This part releases water from the machine when the valve opens. Fits many Electrolux Professional, Wascator, Zanussi W365H, W375H, W385M, W3100, W3200, W3300 series models & valve 432250201. Check the fit table for your model.

Tumble dryer belt Optibelt-RB 487151143, 0E1270. 4 grooves, width 12 mm. Fits many Wascator, Wascomat, Electrolux Professional, Zanussi D200, DI200, TT200 tumble dryers. Check the fit table for your model.

Washing machine drain valve rubber hose. This part releases water from the machine when the valve opens. Fits many Electrolux Professional, Wascator, Zanussi FL, W100, W200, W300, WE series models and valve 472602000. Check the compatibility table for your model.

Professional washing machine water temperature probe with rubber grommet. NTC 3.8 KOHM. -10 -> +100°C. Replaces part 0W2255. Fits many Electrolux Professional- and Wascator-models. See list for compatible models.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional with electrical permits required by law. If an electronic component is installed by a person without electrician degree or permits the customer is responsible for any possible accidents / damage.

Commercial washing machine pneumatic drain valve 230V, 50/60 Hz. Fits many Wascator and Electrolux Professional appliances. See list for compatible models.

• Inlet connector 86 mm
• Outlet connector 76 mm
• Overflow pipe 44 mm
• Pneumatic tube connector 4 mm

The water heating resistance of the washing machine. There are three of these in the machine, sold individually. Replaces parts 0W1W06, 471983711. Suitable for e.g. Electrolux Professional Wascator W3105H, W3105N, W3130M, W3130N.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial washing machine water drain solenoid valve. Normally open. Fits many Asko, Cylinda, Aga, Electrolux Wascator models. Replaces parts 471921965, 0W0510.

• The outer diameter of the entrance is 50 mm
• The outer diameter of the outlet is 50 mm
• 230V 50-60Hz 20-17Amp
• Depend-O-Drain Made In USA
• The valve housing may be black or light brown

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial washing machine drain valve 24V, replaces Electrolux Professional part 0L2506. See list for compatible models.

• 24 VAC
• 50/60 Hz
• Water inlet 55 mm
• Water outlet 1,5" (~38 mm)
• Overflow pipe 35 mm

Commercial washing machine heating element 230V 2200W. Length 340 mm, width 65 mm, flange 80 x 26 mm. Replaces parts 0E1699, 0W3724, 471981301, 4719813-01, 471981302, 4719813-02. Fits some Wascator and Electrolux Professional models. Check the compatibility with your model in the compatibility table using the information on the machine's model label.

Extension hose for the washing machine or dishwasher  hose. Length 100 cm. In the continuation point, a male connector with an outer diameter of 19 mm, to which you can connect the machine's original hose with a hose clamp. Female end of the drain connection with an inner diameter of 19 mm. Fits most makes and models.

Tub basin shock absorbers for washing machines / professional washing machines. Replaces parts Wascator 0W2295, Suspa 06230027. Fits many Electrolux Professional, Wascator, Zanussi Clarus / Compass models. Check the suitability for your model in the suitability table with the information on the model label of the machine.

• Resistance 120N
• Fixing holes 8 mm
• 165 mm

Commercial washing machine / washing machine water heating element. 6000W 230V (2x3000W). Replaces part Kawai 230v2*3000W, 471981147, 4719811-47. Original spare part for Electrolux Professional Wascator models W4400H01 (950439), W4400H02 (950440).

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Washing machine water heating element. There are three of these in the machine, sold individually. Replaces parts 0W1W06, 471983711, Backer, Irca, Kawai. Fits, among others. Electrolux Professional Wascator W3105H, W3105N, W3130M, W3130N.

• 3330W 240V ac
• Length from flange 330 mm
• Flange rubber 22 x 47 mm
• Flange 31 x 59 mm

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Washing machine, mop machine water valve. Replaces part 471823652. Fits many Electrolux Professional Wascator models. Check the compatibility table with the machine model label for compatibility.

• Three-way valve: solenoid valve with three 220-240Vac coils
• Outer diameter of output connections 13.5 mm
• 5.5l/min flow limiter on output equipped with orange coil
• Highest operating temperature 90°C

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Washing machine drum drive belt 4717711-07, 471771107, 0W2286. Fits many Electrolux Professional Wascator W3105H series models. Check the compatibility with your model in the compatibility table using the machine model information.

Washing machine tank water heating element 230V 2X3180W. Length 456 mm, width 59 mm, flange 78 x 33 mm. Replaces resistors 0W5117, 471982524, 471982724. Fits some Wascator and Electrolux Professional models. Check compatibility with your model in the compatibility table using the information on the machine's model label.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Washing machine, commercial laundry machine, mop machine door locking device, door switch 438956101, 0HN496. Fits many Electrolux Wascator Wascomat Compass Pro, Clarus WH6 W300, W3000 series models. Check the compatibility with your model in the compatibility table using the machine model information.

• ELS DOORLOCK DL4 HS7580/10

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Overflow hose 4322520-01 located at the back of the washing machine / clothes dryer. Black rubber. Replaces part 0W2066. Original spare part for many Electrolux Professional, Wascator, Wascomat models. Check the compatibility with your model in the compatibility table.

Washing machine / clothes washer door glass. Replaces 0W2133. Original spare part for many Electrolux Professional, Wascator Compass Pro series models. Check the compatibility with your model in the compatibility table using the information on the machine's model label.

• Diameter 380 mm
• Height 52 mm

Washing machine / laundry machine loading door handle and locking shaft. Replaces part 0W24BJ. Original spare part for many Electorlux Professional / Wascator Compass, Clarus series models. Check the compatibility with your model in the compatibility table using the information on the machine's model label.

Commercial washing machine heating element 2000W, fits e.g. Wascator W-123, W-124, W-160 and Peko 1002 ja 1202 -models.

CPU unit for a commercial washing machine/dryer. Circuit board located behind the machine's control panel. Includes the Display Blue Gen6 432870204. An original spare part for many Electrolux Professional, Wascator, and Wascomat Compass Pro WH6-6 washing machines and TD6-7 tumble dryers. Please verify compatibility with your specific model by checking the compatibility table against the information on your machine's model label.

• Note! Replacing this part requires Electrolux Professional programming tools.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Bottom drain valve 438009302 for commercial laundry machines, industrial washing machines, and mop-washing machines. This water-pressure-operated drain valve is engaged by water pressure at the start of the wash cycle and is released via a spring mechanism at the end of the cycle, once the water pressure at the valve’s inlet connection ceases. Inlet: 85 mm; outlet: 65 mm. Compatible with many models in the Electrolux Wascator, Wascomat, Compass Pro, Clarus, WH6, W300, and W3000 series. Please verify compatibility with your specific machine using the compatibility chart and your machine's model details.