Model sticker locator
Click the appliance that you have and find out where the model sticker can be found.
Model sticker locator
Your basket is empty.
Front page Home appliance spare parts Kitchen multi mixer Kenwood Tiivisteet_reikaelevyt_ja_muut
Tiivisteet_reikaelevyt_ja_muut
Blender mill glass jug. Original spare part for Kenwood BL770 -model.
Estimated delivery time: 2-7 business days.
Meat grinder aluminium body part. Nut, blade or screw parts not included. Original spare part for Kenwood models MG350, MG354, MG360, MG362, MG364.
Estimated delivery time: 2-7 business days.
Kenwood small feed pusher. Used inside bigger pusher, product no. KW712587. Original spare part for Kenwood models FP970, FP971, FP972, FP973, FP979, FP980.
Estimated delivery time: 2-7 business days.
Gasket for Kenwood blender. Outer diameter 85mm, inner diameter 69mm, height 4mm. Original spare part. Glass blender is default accessory for Multipro Compact models FPM260, FPM265 and FPM270.
Estimated delivery time: 2-7 business days.
Kitchen multi machine drive shaft / blade disc holder. Original spare part for Kenwood Multipro Compact FPP210, FPP220, FPP230, FPP238, FPP239 food processors.
Estimated delivery time: 2-7 business days.
Kitchen multi machine drive shaft / blade disc holder. Original spare part for Kenwood Multipro Compact FPM250, FPM260, FPM265, FPM270 models.
Estimated delivery time: 2-7 business days.
Blade holder / shaft for the vegetable cutter of the kitchen machine. Original spare part for Kenwood AT264 / AT284 multifunction bowls and Kenwood Prospero KM240, KM260 and KM280 series models.
Estimated delivery time: 2-10 business days.
Attachment piece for additional devices located on top of the kitchen universal machine at the power take-off. Grey plastic. For example, a blender is attached to this part. Original spare part for many Kenwood Chef and Major universal machines. Check the compatibility with your model in the compatibility table with the model information found on the bottom of your machine.
Estimated delivery time: 2-10 business days.
Meat grinder cog wheel & spacers. 26 teeth, Diameter 56mm, height 18mm. 10 teeth, diameter 27mm, height 30mm. Original spare part for Kenwood MG35 meat grinder.
Estimated delivery time: 2-7 business days.
Kenwood Chef and Major vegetable cutter with 5 different blades: fine, coarse, thin, thick and grinder blade. Fine and coarse blades are fit for chopping chocolate, nuts and cheeses etc. Thin and thick blades are for slicing vegetables etc.
Replaces older cutter AT643 (AWAT643B01). You may need an adapter to fit the new cutter to older machines (current blade shafts are hexagonal, not chiseled): Kenwood yleiskoneen hitaan ulosoton adapteri KAT001ME
Estimated delivery time: 2-10 business days.
Kitchen multi mixer gearbox. Replaces parts KW715533, KW712414. Original spare part for many Kenwood Major A900, KM200, KM400 -series models. Bayonet -attachment for tools.
Estimated delivery time: 2-10 business days.
Kitchen multi mixer upper body locking shaft. Original spare part for many Kenwood KM300, KM400, KM800, PM900 -series models.
Estimated delivery time: 2-10 business days.
Coffee automat steam nozzle black O-ring seal. Outer diameter 9,8mm, inner diameter 6mm, material c. 1,8mm. Fits for many DeLonghi EAM, EC, ECA, ECAM, EN, ESAM -series models.
Replaces gaskets 5332149000, 5332177600
Estimated delivery time: 2-10 business days.
Kitchen machine top tilting guide. Original spare part for many Kenwood Chef & Major -models.
Estimated delivery time: 2-10 business days.
Blender top lid seal. 130x111x3mm. Original spare part for Kenwood blenders A989, A990, A993, A994, AT993A, AT994A. Machines Kenwood A701A, A901, FP800.
Estimated delivery time: 2-10 business days.
Rubber seal between blender blade & jug. Original spare part for Kenwood BL680.
Estimated delivery time 2 - 4 business days.
Blender rubber foot kit. Including four stopper legs. Original spare part for Kenwood BL700, BL708, BL710, BL760, BL770 -models.
Estimated delivery time: 2-10 business days.
Kenwood blender lid. Includes gasket and filling cork. Fits models AT993, AT994. Original Kenwood spare part.
Estimated delivery time: 2-7 business days.
Blender plastic clutch. Located under the blade. Original spare part for Kenwood Prospero AT283 & AT262 -blenders (both glass & acrylic jug).
Estimated delivery time: 2-10 business days.
Kitchen multi machine high speed output drive coupling. This part drives for example blender. Original spare part for many Kenwood Prospero KM260, KM280 -series models.
Estimated delivery time: 2-10 business days.
Citrus press pressing cone. Clear plastic. Original spare part for Kenwood JE280, JE281 & JE290 -models.
- Attachment outer diameter 74,2 mm
- Total height ~85 mm
Estimated delivery time: 2-10 business days.
Kenwood kMix hinge & spring. Original Kenwood spare part. Fits kMix 650.
Estimated delivery time: 2-7 business days.
Vegetable cutter / meat grinder lid larger & smaller feed pushers. You can feed vegetables & meat safely with these parts. Clear poly carbonate. Original spare part for Kenwood:
- Vegetable cutters: AT340, AT647, KAH647PL, MGX400
- Food Processors: FPM800, FPM810
- Meat grisders: MG517
Estimated delivery time: 2-10 business days.
Kenwood blender gasket. Fits FP980, FP970, FP971, FP972 and FP973.
Estimated delivery time: 2-7 business days.
Blender jug bottom part. Grey plastic. Blade not included. Original spare part for Kenwood KAH359GL, KAH358GL, AT358, KAH357NS.
Estimated delivery time: 2-10 business days.
Meat grinder. Aluminum frame. Includes three steel hole discs with 3 mm, 4.5 mm and 8 mm hole punches. Body, feed screw, feeder plate and tension nut anodised aluminum (Non dishwasher proof). Two sausage funnels, smaller for pork gut shell and bigger for lamb gut shell. Kebbes funnel (stuffed meatballs). For sausage and kebab funnels, there is a storage compartment inside the feeder pusher. Connected to the slow power output of the machine. Also suitable for older Chef and Major machines with a separate adapter: KAT001ME.
Original accessory for many Kenwood Chef Sense and kMix models (KVC, KVL and KMX).
Estimated delivery time: 2-10 business days.
Adapter for Kenwood kitchen machines to the outlet on the front edge. With the help of the adapter, you can use the accessories intended for the newer Chef Sense and kMix universal machines that can be connected to the meat grinder outlet in the older Chef and Major universal machines. If your machine has the BAR chisel-head output shaft, this adapter converts it to Twist Connection accessory attachmens current hexagonal shaped axle.
- Chisel head for machine outlet 5 x 14 mm
- Diameter for machine 25 mm
- Inner diameter for attachment flange 43 mm
- Chuck for the hexagonal shaft of the attachment 8 mm
- Tightening / locking bolt
Estimated delivery time: 2-10 business days.
Meat grinder larger cog wheel. Two-faced: Smaller cogged section 9 teeth (diameter 21mm), larger cogged section 85 teeth (diameter 83,4mm). Total Height 35mm.
Original spare part for Kenwood models: MG350, MG352, MG354, MG360, MG362, MG364.
Estimated delivery time 2 - 4 business days.
Planetary wheel for kitchen machine. Original spare part for many Kenwood Chef KM200, KM300, KM400 -series models.
Estimated delivery time: 2-7 business days.
Kenwood mixer gearbox. Original spare part for many KM & KMM series Chef and Major -models. Notice. once installed, this spare part has no return policy.
Estimated delivery time: 2-10 business days.
Kitchen machine power output safety switch. Original spare part for many Kenwood Prospero KM240, KM260, KM280 -series models.
Estimated delivery time: 2-10 business days.
Kitchen machine control module / circuit board assembly. Including also micro switch. Original spare part for many Kenwood Chef & Major KM200, KM300, KM400, KM600, KM700, KM800 -series models.
Estimated delivery time: 2-10 business days.
Grain mill for Kenwood Kmix -models. Fits also for Chef & Major models with separate adapter: Kenwood yleiskoneen hitaan ulosoton adapteri KAT001ME
The Grain Mill attachment uses an authentic milling action to quickly process grains and pulses. It will mill them to any grain size you need, from coarse granules to a very fine flour. By milling your own flour at home you can be sure of the initial quality of the grain and also that it is not contaminated by other grains - vital for anyone with an allergy to certain flours & gluten found in wheat, rye, barley and oats.
Estimated delivery time: 4-10 business days.
Kitchen machine motor carbon brushes. Original spare part for Kenwood Chef models A701A & A707A.
- W: 4mm
- H: 5,5mm
- L: 19,5mm
Estimated delivery time: 4-14 business days.
Kenwood food processor switch. Fits model AT340.
Estimated delivery time: 4-14 business days.
Kitchen machine fast output drive head. This part drives also the belt for slower top power output. Located in the end of motor axle. Original spare part for many Kenwood Major & CookingChef -series models.
- Attaches to the motor shaft bores
- Inside diameter of the hole 7 mm
- Total length 40 mm
- The outer diameter of the gear is 21 mm
- The outer diameter of the grid is 13.5 mm
Estimated delivery time: 4-10 business days.
Meat mincer feeder screw HXD1-1. Original spare part for MG700, MG710 and MG720 models.
Estimated delivery time: 2-10 business days.
Kitchen machine white knob. Including brass spacer & locking rings. Replaces older knob with separate decal ring, please read about the change: Changing guide
Original spare part for many Kenwood Chef & Major KM200, KM300, KM400, KM800 -series models.
Estimated delivery time: 4-10 business days.
Kitchen machine transmission cogged drive belt. Replaces previous belt PowerGrip 60704. Original spare part for many Kenwood Major / Chef models since 1990. Check the fit table for your model.
Estimated delivery time: 2-10 business days.
Handheld mixer whisk jack holders / power gears. Including 6pcs of spacers. Original spare parts for many Kenwood Kmix HM7, HM8, HMA -series models.
Estimated delivery time: 4-10 business days.
Kitchen machine vegetable cutter blade holder. Original spare part for many Kenwood MultiPro FP700, FP900 -series models.
Currently unavailable
Bread machine dough bowl. H 180 mm. Size c. 210 x 146 mm. Twist&lock attachment. Compatible kneader: Kenwood leipäkoneen vaivain 8mm. Original spare part for Kenwood BM350 & BM450 -models:
| BM450 | 0WBM450002 |
| BM350 | 0WBM350002 |
NOTE! There are two different bowl attachments. Check the product illustrations to make sure that the clamps on the bottom of the bowl are the same as your old bowl. A bowl with higher mounting points is also available.
Estimated delivery time: 4-10 business days.
Kenwood meat mincer cog wheel. Fits: MG530, MG400,GM515, GM480, MG470, MG500, MG450, MG300. Includes spacers.
Estimated delivery time: 2-7 business days.
Mixer arm / dough hook at the bottom of the bread machine bowl. Fits newer Kenwood BM250, BM256, BM260, BM350, BM366, BM450 models. Note! Fits only a bowl with an 8mm shaft (different bowls have been used in the same equipment).
Fits bowls:
Knife suitable for 10 mm shaft of previous model versions also available: Kenwood leipäkoneen vaivain 10mm
Estimated delivery time: 4-10 business days.
Kitchen multi mixer gearbox. Original spare part for Kenwood Major KM630, KMM770 models.
Estimated delivery time: 4-10 business days.
Multi mixer drive unit and cover. Fits many Kenwood Chef-models, see list for compatibility.
Estimated delivery time: 4-10 business days.
Kitchen machine motor pulley / drive head. Original spare part for many Kenwood Chef models. See list for compatibility.
- Axle hole 8 mm
- Drive head diameter 13.5 mm
- Pulley tooth outer diameter 20 mm
- Total length 38 mm
Estimated delivery time: 4-10 business days.
Multimixer drive unit, fits many Kenwood Major models, see list for compatibility.
Estimated delivery time: 4-10 business days.
Julienne blade for Kenwood KAH647PL, AT640, AT647. Original spare part.
- Diameter 158 mm
- Hexagonal chuck, 12 mm
- total height 34 mm
- Cutting strip width 4 mm
Estimated delivery time: 4-10 business days.
Universal machine bowl shaft. Fits Kenwood Chef / Major models KAH647PL and AT647 bowl. Only suitable for power take-off with four-pronged crosshead. Shaft for the triangular drawbar head: Kenwood monitoimikoneen vetoakseli AT647
Estimated delivery time: 4-10 business days.
| 51 - 100 of 164 results |
|
