Inlet & outlet pipes

Washing machine / dishwasher water inlet hose with Aquastop -valve. 3/4" attachments. max 90°C. 0,2-10 bar. Lenght 3500mm.

Dishwasher water inlet hose with Aquastop control & water inlet valve. Bitron. Length c. 140cm. Alternative part, replaces hoses 8072506168, 1171990623, 1171990805, 3286024439, 3286024603, 4055125068. Fits for many Aeg Faforit, Electrolux ESF ESI GA ESL, Husqvarna QB, Ikea -models.

Dishwasher drain hose, original spare part for many D1400-series models. Lenght 2m. See list for compatible models.

Dishwasher circulation pump hose. Grey rubber. Original spare part for many Candy, Hoover -models.

Dishwasher water inlet hose with magnetic solenoid valve & aquastop. Replaces parts 482000023524, C00372679. Length 1600mm. Inlet connector 3/4". The machine takes water with the 230V water valve located in the inlet end of this hose. Fits for many Ariston, Indesit, Hotpoint, Whirlpool -models.

Dishwasher drain hose. Length 2.1 m. O-ring outer diameter of the machine head connection 24 mm. Outlet head outer diameter 22 mm. Replaces part 00496985. Original spare part for many Bosch Siemens models. Check the suitability for your model using the E-number on the top of the machine's filling door in the suitability table.

Faucet connection adapter for connecting the filling water hose of a washing machine or dishwasher. Included between the adapter and the tap fitting-half inch rubber seal. If your inlet faucet connection is 1/2 "(tap thread measured from the top approx. 21 mm) and your washing machine water hose connection is 3/4" (hose connection thread measured from the inside approx. 25 mm) you can adapt to the hose connection with this adapter. The supplied rubber seal seals the adapter to the faucet at the ends, i.e. between the end of the threaded part of the faucet and the flange inside the adapter. Manufactured by Electrolux.

Eltek Water Block flow valve manual reset fitting 10.0245.00. Fits directly to the Water Block's 3/4 "output. The red button allows you to reset / reset the Water Block's activated limiter. Fits Eltek valves 100041 and 101179.

• Input connection 3/4 "female (thread inside 24 mm)
• Outlet connection 3/4 "male (thread 26 mm on top)
• Rubber seal at the inlet connection
• Total length 75 mm

Rubber hose between the dishwasher's washing pump and the water dispenser. Replaces part C00312781. Original spare part for many Whirlpool models. Check the fit table for your model.

• The inner diameter of the smaller end is 26 mm
• Inner diameter of the larger end 31 mm
• Length 60 mm

Rubber hose between the dishwasher bottom sump and the drain pump housing. Original spare part for many AEG Favorit, Electrolux ESF, ESI, ESL, Elektro Helios DI, Husqvarna QB6040, Ikea LDW, RENGORA, SKINANDE, Rosenlew RW, Zanussi ZDF, ZDI, ZDT series models. Check the suitability for your model in the compatibility table with the machine's PROD/PNC number.

Dishwasher inlet hose and water valve 230V. Length 2 meters. Original spare part for many Bosch / Siemens models. Check the fit table for your model.

Alternative version W502691.

Dishwasher plastic drain hose. Spare parts for many Bosch SG, SM, Siemens SE, SF, SL series models. Check the fit table for your model.

• Length 1,5 m
• Connector 1: outer 22,5 mm, inner 19 mm
• Connector 2: outer 22 mm, inner 19 mm

Dishwasher drain hose. A breather insert in the hose. Length 2.3 meters. Replaces parts 140011409012, 140011410010. Suitable spare part for many AEG, Electrolux and Husqvarna models. Check the compatibility with your model in the list of compatible models.

Dishwasher / washing machine drain hose. Length 1.5 m. Straight connection ends, inner diameter of the connections 21 mm. Replaces parts 1473431, 1473432, 1473433, 1473434, 1473435, 1473436, 1108288000. Part manufactured by accessory manufacturer TP REFLEX, fits many Miele G500, G7700 series models. Check the fit table for your model.

Plug / hat special brass with 3/4 "connection size. Includes seal. With this part you can plug a threaded connection with a 3/4" external thread, eg a washing machine tap. OPAL

• Internal thread approx. 24.3 mm
• Nut base 30 mm
• Thread depth to seal 10 mm
• Height 14.5 mm
• Gasket 24 mm / 16.5 mm / 2 mm

Cap / plug for the drain hose connection in the kitchen odor trap. Inner diameter 19 mm. Black elastic plastic. If you remove the dishwasher drain hose from the kitchen sink drain connection, plug the odor trap connection with this part.

Dishwasher filling water hose with Aquastop water safety system and solenoid valve. 220-240V ac. Manufactured by Bitron. Alternative manufacturer's part, replaces Miele hoses 5016970, 5016971, 5168031, 5168032, 5168033, 5168034, 5168035. Fits many Miele G7800 series models. Check the fit table for your model.

Dishwasher / washing machine water drain hose. Length 215 cm. 90 degree angle from the end of the machine. Rubber coupling heads. Replace the hoses Electrolux 1118270030, 1118270006, 8996461308406, Miele 5500330, 2244182, 2244183, 5500331, 9706850, LG 5214FR3188H, 5214FR3188G. Check the compatibility table for your model.

• The inner diameter of the machine connector is 22 mm
• Outlet inner diameter 21 mm
• Hose outer diameter 24 mm

A rubber hose that directs water from the dishwasher's circulating water pump to the distributor / sray arm changer. Original spare part for many Asko DBI, DFI, DFS, DI, DSD, Gorenje GI, GS, GU, GV, Cylinda SVDISK, Upo D6000 series models. Check the fit table for your model.

Dishwasher inlet hose. Includes a water valve at the end of the hose. Replaces parts Samsung DD81-01405A, Eltek 10.0390.56, Gorenje 385839, 565921, 342411, Fagor Brandt AS0014390, Midea 17476000007423. Fits many Samsung models. Check the fit table for your model.

AquaStop filling hose for a dishwasher. Includes the water valve. Manufacturer Bitron, original quality part that replaces the original spare part 00299756. If the machine does not take water, the water valve at the end of this part may be broken. Fits many Bosch and Siemens models, check the compatibility with your model in the compatibility table using the E-number found on the door of your machine.

Dishwasher rubber connection between the bottom sump and the heating element. The hose also has a connection point for the sensor. Replace parts 284579 Gorenje, 758973893 Panasonic, 437698 Küppersbusch. Original spare part for many Smeg models. Check the fit table for your model.

Plug U-25. Used to plug the kitchen water trap overflow connection. Inner diameter 25 mm. Manufactured by Prevex.

• Inner diameter 25 mm
• Height 19.5 mm
• Maximum outer diameter 31 mm
• Smallest outer diameter 29.5 mm

Dishwasher inlet hose with Aquastop water valve. TP Reflex. Replaces hoses 1760360200, 54400325. Fits many Beko, Gram, Cylinda models. Check the fit table for your model.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Dishwasher inlet water hose with magnetic valve. At the end of the filling hose, there is an electric water valve. Hose length 1.5 meters. Replaces hoses Gorenje 842761, Galanz 258210000146. Original spare part for many Gorenje GI, GS, Upo D42, D62, DI62 series models. Check the suitability for your model in the suitability table with the information on the model sticker found on the edge of the door of your machine.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.