Other spare parts

Dishwasher door lock. Original spare part for many AEG, Electrolux and Zanussi -models.

Dishwasher installation kit to be integrated in the kitchen cabinet. Includes mounting brackets for mounting the machine on cabinet frames / underside of the table top, mounting plate mounting screws for mounting the machine door, filling water hose adapter 1/2 "-3/4", 1/2 "seal and drain hose hose clamp. Suitable for many AEG Favorit, Electrolux ESL, Hikea RDea, Ikea RDea Check the suitability table for your model.

The sliding part of the dishwasher door is part of the hinge mechanism and prevents the door from falling when it is open. Original spare part for many AEG Favorit, Electrolux ESF, ESL, ESI, Husqvarna QB series models. Check the suitability for your model in the suitability table with the information on the model sticker found on the right side of the machine door.

Dishwasher door hinge spring wires. Includes two pieces of cords with plastic connection ends ready. Original spare part for many Bosch Siemens models. Check the fit table for your model.

Dishwasher water heating element. 230V 1850W. Fits many Candy Hoover models. Check the fit for your model in the fit table.

Rubber hose between the dishwasher's washing pump and the water dispenser. Replaces part C00312781. Original spare part for many Whirlpool models. Check the fit table for your model.

• The inner diameter of the smaller end is 26 mm
• Inner diameter of the larger end 31 mm
• Length 60 mm

Bottom sump at the bottom of the dishwasher washroom. Includes rubber connector hoses. Original spare part for many AEG Favorit, Electrolux ESF, ESI, ESL, Elektro Helios DI, Husqvarna QB6040, Ikea LDW, RENGORA, SKINANDE, Rosenlew RW, Zanussi ZDF, ZDI, ZDT series models. Check the fit table for your model.

Rubber hose between the dishwasher bottom sump and the housing of the circulating water pump. Inner diameter 41 mm. Length approx. 43 mm. Original spare part for many AEG Favorit, Electrolux ESF, ESI, ESL, Elektro Helios DI, Husqvarna QB6040, Ikea LDW, RENGORA, SKINANDE, Rosenlew RW, Zanussi ZDF, ZDI, ZDT series models. Check the suitability for your model in the compatibility table with the machine's PROD/PNC number.

Note! Not suitable for models where the rubber compound is an integral part of the bottom pool. In this case, the entire bottom sump must be replaced.

Dishwasher circulation pump impeller, replaces part 00065550. See list for compatible models!

Dishwasher door repair set, original spare part. Replaces parts 00659339, 00627230 and 00623540.

See list for compatible models!

Dishwasher water heating element. 1600W 230V. Original spare part for many Asko, Upo, Gorenje, Cylinda models. Check the fit table for your model.

Dishwasher lower basket plate holder brackets. Includes 4 smaller clips, 4 longer clamps, 1 center holder. Original spare part for many Bosch Siemens models. Check the compatibility with your device in the model view!

Dishwasher front edge adjustment foot. Metal threaded rod and plastic paw. Original spare part for many AEG Favorit, Electrolux, Elektro Helios, Ikea, Husqvarna, Rosenlew, Zanussi models. Check the fit table for your model.

The plinth plate located under the dishwasher door, in the lower part at the front. White plastic. Dimensions 595 x 129 mm. The distance between the fixing holes is 470 mm. Does not include mounting accessories. Original spare part for many Bosch Siemens models. Check the suitability for your model in the suitability table using the E-number on the upper edge of the machine door.

Non-return valve located in the bottom basin of the dishwasher in connection with the drain pump. Prevents water from flowing from the sink drain along the drain hose into the dishwasher. Original spare part for many AEG, Electrolux, Husqvarna, Ikea, Rosenlew, Zanussi models. Check the fit table for your model.

Dishwasher door latch. Located in the upper part of the door. Original spare part for many AEG and Electrolux models. Check the compatibility with your model in the compatibility table with the PROD/PNC number of the model sticker found on the edge of the machine door.

Dishwasher internal LED light and cover, original spare part. Replaces part 1529404004. See list for compatible models!

Viewed from the front of the top basket of the dishwasher, the left support rail. Grey plastic. Holds the cutlery level on the slide rail. Attaches to the metal support frame of the dinner table on the right side. The protrusions of this part run on the inside of the metal rail. Original spare part for many Asko, Gorenje, Upo models. Check the fit for your model in the fit table.

• Maximum length 197 mm
• C3-10049524

Rubber hose between the dishwasher's water softener and the washroom. Original spare part for many AEG Favorit, Electrolux ESF, GA, ESI, Husqvarna QB, Ikea ENASTAENDE, Zanussi ZDT series models. Check the fit table for your model.

Dishwasher, refrigerator or freezer logo plate "AEG". Original spare part for many AEG Favorit, Santo, Arctis series models. Check the suitability for your model in the suitability table with the machine's PROD / PNC number.

Dishwasher lower basket guides (right and left). Original spare part, see list for compatible models!

Dishwasher bottom cover mounting accessories. Includes plinth plate brackets. plinth fixing screws and screw caps in black, white and brown. Original kit for many Bosch Siemens SR series models. Check the fit table for your model.

Dishwasher push button board, located behind the control panel. Original spare part, see list for compatible models.

Dishwasher door sealing strip. Located in the machine body, from side to top to the other side. Length 1775 mm. Profile 8 x 21 mm. The machine door seals against this part. Replaces part Amica 1010181. Original spare part for many Beko DFN, DIN, DSFN, DSN, DUN, DWD, SDFN series models. Check the fit table for your model.

Dishwasher front adjustable leg. Also fits many models in the back foot holder. Black plastic. Replaces part Gorenje 403743, ATAG 88043200. Fits many Gram OM, DS, Point PD, Upo D60, D62, D65 series models. Check the fit table for your model.