Model sticker locator
Click the appliance that you have and find out where the model sticker can be found.
Model sticker locator
Your basket is empty.
Front page Home appliance spare parts Washing machine Other spares
Other spares
Washing machine / tumble dryer stand 656143. Below is a sliding basket for laundry. For washing machines weighing a maximum of 250 Kg. Plastic. Adjustable feet. Top section dimensions 620 x 555 mm. Stand height 310 mm. Meliconi.
Estimated delivery time: 4-10 business days.
Washing machine water temperature sensor. Original spare part for many AEG lavamat, Electrolux EW, Elektro Helios KT, TT, TF, Husqvarna QW, Rosenlew RTT, RTF, Zanussi TL, TC, TJ, WD, FJ, FL -series models.
Estimated delivery time: 2-7 business days.
Washing machine drum front part, original spare part.
Estimated delivery time: 4-10 business days.
Washing machine main circuit board. Original spare part for many Samsung WW80J66, WW90J66 series models. To ensure compatibility, please send us the model and serial number on the model label before ordering.
Estimated delivery time: 2-10 business days.
Faucet connection adapter for connecting the filling water hose of a washing machine or dishwasher. Included between the adapter and the tap fitting-half inch rubber seal. If your inlet faucet connection is 1/2 "(tap thread measured from the top approx. 21 mm) and your washing machine water hose connection is 3/4" (hose connection thread measured from the inside approx. 25 mm) you can adapt to the hose connection with this adapter. The supplied rubber seal seals the adapter to the faucet at the ends, i.e. between the end of the threaded part of the faucet and the flange inside the adapter. Manufactured by Electrolux.
Estimated delivery time: 2-7 business days.
Washing machine door handle spring. This part is in connection with the door locking claw. The shaft of the opening handle passes through this part. Original spare part for many Samsung WD, WF, WW series models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Washing machine motor axle support, original spare part. See list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine detergent drawer cap seal, original spare part. See list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine tub support spring. Supports the sink of the washing machine from the upper frame of the machine. The spring usually does not need to be replaced unless it shears off. Replaces part C00447715. Original spare part for many Whirlpool AWG, FSCR, WLF series models. Check the suitability for your model in the suitability table with the machine's SERVICE number.
Estimated delivery time: 4-10 business days.
Eltek Water Block flow valve manual reset fitting 10.0245.00. Fits directly to the Water Block's 3/4 "output. The red button allows you to reset / reset the Water Block's activated limiter. Fits Eltek valves 100041 and 101179.
- Input connection 3/4 "female (thread inside 24 mm)
- Outlet connection 3/4 "male (thread 26 mm on top)
- Rubber seal at the inlet connection
- Total length 75 mm
Estimated delivery time: 2-10 business days.
Washing machine pressure switch hose. Length 5 meters. Outer diameter 8 mm, inner diameter 4 mm. Fits for many Miele models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Washing machine heating element seal, replaces Miele part 5986211. See list for compatible models!
Estimated delivery time: 4-10 business days.
Washing machine PCB, original spare part. Replaces part DC94-06067B.
To ensure compatibility, please send us the model and serial number on the model label before ordering!
Estimated delivery time: 4-10 business days.
Washing machine drum lock C00377380, original spare part. See list for compatible models!
Estimated delivery time: 10-20 business days.
Washing machine circuit board assembly. Original spare part.
Please write us model code & serial number so we can ensure the fit to your model.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time 2 - 4 business days.
Washing machine tub spring, original spare part. See list for compatible models!
Estimated delivery time: business days.
Washing machine tub spring, original spare part. See list for compatible models!
Estimated delivery time: 4-10 business days.
Drying washing machine temperature sensor, original spare part. See list for compatible models!
Estimated delivery time: 2-7 business days.
Washing machine drum suspender spring, alternative version. Replaces parts 4176780, 4473970, 4710290. See list for compatible models!
Estimated delivery time: 4-10 business days.
Washing machine inlet hose, original spare part. See list for compatible models!
Estimated delivery time: 2-10 business days.
Washing machine water NTC temperature sensor. Replaces part 41022107. Fits many Candy CM, CO, CT, GO, Hoover DYN, HN, OP, VHD series models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Display circuit board / electronics on the washing machine control panel. Original spare part for many Samsung WW series models.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-14 business days.
Thermostat that controls the water temperature of the washing machine. Original spare part for many AEG Lavamat series models. Check the compatibility table for your model with the machine model data.
Estimated delivery time: 4-10 business days.
Washing machine thermostat sensor seal. Rubber. Original spare part for many AEG Lavamat series models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Washing machine front panel, original spare part. See list for compatible models!
Estimated delivery time: 4-10 business days.
Washing machine dispenser opener, original spare part. See list for compatible models!
Estimated delivery time: 4-10 business days.
Washing machine EasyDose detergent drawer divider, original spare part. See list for compatible models!
Estimated delivery time: 10-15 business days.
Drying fan motor for drying washing machine 17.5Vdc. Located at the top of the washing machine in the dryer case. Original spare part for many Samsung WD series models. Check the fit table for your model.
Estimated delivery time: 2-10 business days.
Washing machine dryer fan motor shaft seal gasket. Original spare part for many Samsung WD series models.
Estimated delivery time: 4-10 business days.
Washing machine analog pressure switch, original spare part. See list for compatible models!
Estimated delivery time: 2-7 business days.
Drying washing machine touch screen and electronics. Original spare part, see list for compatible models.
Estimated delivery time: 4-10 business days.
Pressure chamber in the bottom hose of the washing machine. White plastic. In this section, the water level creates pressure on the pressure switch, from which the machine examines the amount of wash water. A clogged pressure chamber can cause problems with drainage and program progress. Original spare part for many AEG Pallets, Electrolux EWT, EWD, WASGL, TW, EW, EWB, Elektro Helios TT, Husqvarna QW, Rosenlew RTT, Zanussi ZWT, TE, ZWA, ZWQ, TL series models. Check the fit table for your model.
Estimated delivery time: 2-7 business days.
Plastic control panel at the top of the washing machine and front panel of the detergent drawer. If, for example, the handle part of the detergent drawer breaks, you may need to replace this part. Original spare part for many AEG Lavamat L6FB series models. Check the compatibility table for your model with the PROD/PNC number of your machine.
Estimated delivery time: 2-7 business days.
Drain connection for washing machine and dryer drain hoses. With this funnel you can attach two home appliance drain hoses into the same 32 mm sewer pipe. Fits a rubber-sealed 32 mm sleeve section. The ends of the drain hoses remain free to flow due to the design of the inside of the funnel. White plastic.
- Connection head for drain pipe 32 mm
- Maximum outlet hose diameter 33 mm
- Total height 255 mm
- Top length 75 mm
- Top width 40 mm
Estimated delivery time: 4-10 business days.
Washing machine front wheel and pedal, original spare part for model HHPT6146S (31002420).
Estimated delivery time: 15-20 business days.
Washing Machine Main Circuit Board / Power Card. Original spare part for a few Samsung WF1702NHW, WF1702NHV series models. To ensure compatibility, we need the serial number on the model label of your machine before ordering a part.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-10 business days.
A spring supporting the washing machine tub package from above. There are usually two of these in the machine, sold individually. Length 145 mm. Original spare part for many Samsung WD, WF, WW series models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Washing machine tub support spring. Supports the tub at the top of the machine. The machine usually has two of these similar, sold individually. Original spare part for many Samsung Q1000 series models. Check the fit table for your model.
Estimated delivery time: 4-10 business days.
Washing machine pump cover. 7,5 x 6,5 cm. Original spare part for many Bosch / Siemens models.
Estimated delivery time: 2-10 business days.
Washing machine axle seal, fits many Bosch models and replaces seal 00056766.
- Outer diameter 88 mm
- Inner diameter 40 mm
- Thickness 14,8 mm
- Type GPPFIFE
Estimated delivery time: 4-10 business days.
Washing machine on/off button, original spare part for many Asko and Cylinda WM25.3-models. See list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine adjustment foot counterpart, original spare part. See list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine internal hose between inlet valve and detergent dispenser. Original spare part, see list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine fluff filter, original spare part. See list for compatible models.
Estimated delivery time: 4-10 business days.
Washing machine front panel, original spare part. See list for compatible models.
Estimated delivery time: 2-7 business days.
Washing machine shaft seal. Alternative part, replaces Miele parts 1751620, 1751621 and 1195751. Check the compatibility with your model in the compatibility table.
Estimated delivery time: 4-10 business days.
Top loading washing machine control circuit board / display. Includes electronics with machine control buttons, program selector and display. Original spare part for many AEG Lavamat L70000 series models. Check the suitability for your model with the PROD / PNC number on the machine door in the suitability table.
Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional. If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.
Estimated delivery time: 4-7 business days.
Dishwasher circuit board, original spare part. Replaces part Korvaa osan 140006214013. See list for compatible models.
This part needs to be configured, please send us your dishwasher PNC/Prod and serial number.
Estimated delivery time: 2-7 business days.
Washing machine circulation water tube holder.
Estimated delivery time: 2-7 business days.
Washing machine circulation hose holder.
Estimated delivery time: 2-7 business days.
| 201 - 250 of 352 results |
|
