Print

Oven / stove

Oven / stove

Display per page
Sort by
41 - 50 of 64 results
Product no.: 2284

Professional kitchen oven overheating sensor, 365°C with automatic reset. Replaces older 360°C versions. EGO 56.10573.500 365-20°C 2115. Fits Metos Rational HCPC, CCD and CM -series models.

  • Capillary lenght 1170 mm
  • Sensor bulbo ø 4 x 95 mm
  • Nut M14 x 1
  • 16A 230Vac

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 0S2878

Professional kitchen convection oven silicone hose for washing. 6,35X13,2mm, Lenght 1400mm. Other end straight 8 mm, the other end corner 1/2" (15mm). Including adapter 1/2" - 10mm, gasket & corder adapter with quick lock. Original spare part for many Electrolux Professional AOS ovens with winding washing hose. Replaces part 0S1262. See list for compatible models.  

Product no.: 2663

Oven / grill thermostat RM gastro 402511200. Capillary length 970 mm, sensor part Bulbo 5 x 80 mm. Adjustment range 50-300°C. 1-phase, 16A 230Vac. Fits many RedFox and RM Gastro models.

Product no.: 4003D

Knob for the thermostat of an oven, stove or other heating device. Imit 556326. Scale 0-300 degrees. Suitable for 6 mm shaft (D-model 6x4.6 mm). Diameter 41 mm, height 15.5 mm. Black plastic. Suitable for e.g. to thermostat 4001D.

Product no.: 4001D

Thermostat controlling the temperature of an oven, stove or other heating device 0-300°C. Single phase 16A 230V. Capillary length 1500 mm. Sensor part Bulbo 3.5 x 190 mm. D-shaped axle 6x4.6 mm. Toggle switch tip ( C-1 closed or C-2 open). Imit TR2 9332. Compatible knob: 4003D

Product no.: 4003E

Thermostat knob washer Imit 556501. Chromed steel. Suitable for thermostats and controls with a distance of 28 mm (20 x 20 mm) across the mounting holes around the axis. Outer diameter 56 mm. Flat area for the knob 42 mm.

Compatible products:

Product no.: 3221638

Oven halogen bulb Osram Halostar Oven 64428. Replaces bulbs Bosch Siemens 00189351. Fits many Bosch Siemens ovens. Check the fit for your model in the fit table.

  • G4 base
  • Power 30W
  • Operating voltage 12V
  • Heat resistance 450°C
  • 320 lumens
  • 2800K color temperature
Product no.: 050766

Hinge for the door of a commercial kitchen oven / stove. Located in the hatch. Same hinge fits right and left side, sold separately. Comes with a roller guide. Original spare part for many Electrolux Professional and Zanussi models. Check the fit for your model in the fit table.

Product no.: 2499

Commercial oven cooking thermometer sensor 87.000.97. This sensor has three wires. Fits many Metos Rational SCC201, SCC202 series models. Replaces section 40.02.102P.

  • Sensor diameter 3 mm, length 97 mm
  • Cord length 2100 mm
  • Handle 40 mm
  • Through nut M16

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Product no.: 2283B

Commercial oven cooking thermometer sensor 87.000.96. This sensor has eight wires. Fits many Metos Rational SCC201, SCC202 series models.

  • Sensor diameter 3 mm, length 97 mm
  • Cord length 2160 mm
  • Handle 40 mm
  • Through nut M16

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

41 - 50 of 64 results