Nilfisk vacuum cleaner spare parts

Vacuum cleaner cylinder main filter. Pleated filter with sheet metal base and rubber rim. Replaces filters 1406880003, 1406880500. Fits Nilfisk Terrier UZ934.

• Filter height 128 mm
• Filter outer diameter 190 mm
• Filter inner diameter 161 mm

Vacuum cleaner filter. Located inside the top lid. Fits: Nilfisk / Electrolux VP930, GD930, UZ930, Volta UZ930, Electrolux UZ920 - UZ930S, UZ932, Euroclean, Nilfisk GD920 - GD930S Panther, EVA, Volta Proffs

• thickness 35 mm
• diameter 300 mm

Fine filter also available: Nilfisk UZ 930 / GD 930 imurin lisäsuodatin (300mm) 5 kpl

ES100 dust bag kit. Contains 10 microfiber dust bags. Better filtering ability than paper bag, up to 50% longer service life. Guarantees the best suction power. Cardboard width 95 mm. Hole size 55 mm. Bag length 740 mm, height 165 mm. Volume approx. 15 liters. Suitable for many professional vacuum cleaners:

• Electrolux Z930, Z940, Z950, Pro Z951, UZ173, UZ872, UZ920, UZ921, UZ922, UZ923/S, UZ925, UZ930/S, UZ945, DP9000, P9000
• Volta UZ173, UZ920, UZ930, UZ923/S, UZ925, UZ93, UZ945
• Nilfisk GD930 Panther, DP9000, GD936, GD940, GD950
• EuroClean HZ173, UZ920, UZ930, UZ930S, UZ931, UZ935, UZ945
• Kärcher T201, T251, T201C

Vacuum cleaner suction hose. Handle end diameter 32 mm. machine head max diameter 54,5 mm. Fits:

• Electrolux / Nilfisk UZ872, UZ932, UZ934 Terrier, GD320, GWD320, GWD335
• Volta UZ872, UZ832

Vacuum cleaner suction hose. Three claw attachment to the cleaner. 32 mm handle end diameter for telescopic tube. Attachment point outer diameter 43 mm. Hose length 185 cm + handle. Original Nilfisk spare part.

• Electrolux Euroclean / Volta / Nilfisk Panther GD930, UZ930
• LUX / Electrolux D710, D325, D310, D730, D728, D740, D748, D750, D768, D770, D775, D780, D790, D795
• Electrolux ZE020, 9000846858, 115719049, 116435017, 1081601336
• Nilfisk 1402782500

Paper dust bags for professional vacuum cleaners. pack of 10 dust bags. Suitable for:

• Electrolux Z930, Z940, Z950, Pro Z951, UZ173, UZ872, UZ920, UZ921, UZ922, UZ923/S, UZ925, UZ930/S, UZ945, DP9000, P9000
• Volta UZ173, UZ920, UZ930, UZ923/S, UZ925, UZ93, UZ945
• Nilfisk GD930 Panther, GD930S, DP9000, GD936, GD940, GD950
• EuroClean HZ173, UZ920, UZ930, UZ930S, UZ931, UZ935, UZ945
• Kärcher T201, T251, T201C

Vacuum cleaner dust bags. Including 4 pieces of microfiber dust bags. Fits to Nilfisk: GA70, GM80, GM90, GX80, GX90, GS80, GS84, GS90, GS90C, G90/A, 816200, GSD

(DUBG222NIL4) 

Power cable for vacuum cleaners. Lenght 15 meters. Black. 2 x 1,0 mm2. Round outer sole with 6,5mm diameter. Euro- plug. VCPC110CBK150.

Professional vacuum cleaner motor for Nilfisk / Electrolux Panther GD930S2, UZ930S2 -models with power adjustment. Attachment with two springs on the top of the motor. Motor height c. 165mm, bottom diameter c. 143mm. 230V 4,8A 1000W MKM 3535-6 50/60Hz 20000 r/min. 1407902500

Vacuum cleaner handle with suction hose connection. Original spare part for many Nilfisk VP930, GD930 Panther, Electrolux UZ930 -series models.

Vacuum cleaner filter cartridge. Diameter 185 mm, height 140 mm. Replace filters  63990, 11753, 302000490, 107402338 (orange edged). Fits many Makita, Nilfisk, Protool models.

Black rocker switch with rubber cover. Excellent switch for dirty and wet objects. Protected by a rubber edge throughout, protection class IP65 from the outside. Black frame. The ON-OFF-ON positions (1-0-2) remain on. Suitable for many vacuum cleaners, household appliances, industrial machines and other electrical equipment. Replaces part Nilfisk Aero / Flex 107409135.

Vacuum cleaner wheels 2pcs. Azle diameter 8 mm, axle length 25 mm. Wheel diameter 50 mm. Original spare part for Nilfisk Multi 2 -series models.

Vacuum cleaner suction hose 1.8 m. Replaces part 12018001. Fits many Nilfisk CDB, CDF, GD series models.

Power switch with orange light. 3628-251.22 INTERBÄR. Replaces e.g. switch Nilfisk 1405496510. Suitable as a main power switch for many devices.

• Mounting hole size 22 x 19 mm
• External dimensions of the frame 24 x 21 mm
• Thickness 23 mm
• 4 x 4.8 mm Abiko connectors
• 10A 250VAC

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage.

Vacuum cleaner microfiber filters. Includes two similar filters on the vacuum cleaner cover. Maximum dimensions 130 x 178 mm, thickness 1.5 mm. Replaces filter 11693700. Original spare part for many Nilfisk GS80, GM80, GS81, GS90, GM90 series models.

Vacuum cleaner microfiber dust bags. The package contains 4 pieces of 22 / 30l Fleece dust bags. Original spare part for a few Nilfisk Multi II series models. Check the fit table for your model.

Vacuum cleaner suction hose. Accessory version, fits many Electrolux Euroclean / Volta / Nilfisk Panther models with three-pin suction cup holder. Telescopic tube connection 32 mm. The outer diameter of the vacuum cleaner connection head is 43 mm. Hose length 180 cm + handle.

• Electrolux Euroclean / Volta / Nilfisk Panther GD930, UZ930, VP930
• LUX / Electrolux D710, D325, D310, D730, D728, D740, D748, D750, D768, D770, D775, D780, D790, D795
• Electrolux ZE020, 9000846858, 115719049, 116435017
• Nilfisk 1402782500
• Volta U200 series

Vacuum cleaner carrying handle. Does not include mounting screws (use old screws). Black plastic. Original spare part for Nilfisk Terrier UZ934.

Vacuum cleaner motor V1J-PH20-009. Original spare part for some Nilfisk GD101, GD111, Saltix 10, VP300 series models. Check the compatibility with your model in the compatibility table with the product number found on the model label of the vacuum cleaner.

• 220-240V ac 900W
• 1471428000 SIP CINDERSON MOTOR

Wet & Dry vacuum cleaner Hepa filter attachment plate. Black plastic. A thread in the middle to tighten the filter in place. Original spare part for many Nilfisk Alto Aero 20, 25 and Multi 20, 30 series models. Check the fit for your model in the fit table.

Machine head to vacuum cleaner suction hose. This hose connector locks the hose to the vacuum cleaner. Suitable for vacuum cleaners where the hose is attached using the three fixing lugs on the machine head. Fastening point diameter 43 mm. Rubber seal. Left-handed thread for suction hoses with an outer diameter of 38-41 mm. Suitable for many Nilfisk GD930 Panther, VP930, Electrolux Euroclean UZ930, Lux D700 series vacuum cleaners.

Vacuum cleaner suction hose handle. Black plastic. Original spare part for many Nilfisk Select series models. Check the suitability for your model in the suitability table with the information on the model label of the vacuum cleaner.

Dust bags for industrial vacuum cleaners / vacuum cleaners intended for professional use. 3 synthetic microfibre bags in the package. Replaces parts 1407633010, 1407695000, NA1470746010. Original spare part for many Nilfisk GWD350, GWD350-2, GWD375, GWD375-2, MAXXI WD7, WD150, WD175, WD245, WD245F, WD250, WD260, WD275 series models. Check the fit for your model in the fit table.

Dust bags for contsruction vacuum cleaners / large vacuum cleaners. The package includes five microfiber dust bags. Fits many Electrolux, Kärcher, Nilfisk Aero models. Check the fit for your model in the fit table.