Spare parts

Kit for professional dishwasher. Includes 1 x Z201905 nozzle, 1 x Z201906 attachment clip and 1 x Q307036 nozzle seal. Fits Fagor FI-30, FI-80, LVC12, LVC15, LVC21 models.

Dishwasher metal spray arm. This model has holes in the ends & middle. Spray nozzles not included. Lenght 230mm, diameter 12mm. Fits to Fagor FI-30, FI-48, FI-72, FI-80, FI-100, FI-120 -models. Z201901000

Commercial dishwasher spray arm center piece Z201903000. Rinse tube connections 12mm. Fits to Fagor FI-30, FI-48, FI-72, FI-80, FI-100, FI-120 -models.

Commercial dishwasher pressure switch. Fagor FI-30, FI-48, FI-64, FI-72 -models. D 58 mm, tube 5,5 mm. 230V 16A max 85°C. 40/15mbar.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial dishwasher / washer detergent pump. Simple hose pump to 230V 50Hz. Including suction nozzle, corner joint, 350cm pipe, attachment kit. Fits for many Dishwashers & other washing devices. Made in Italy.

Timer max 5,5 L/h

Commercial dishwasher bottom water divider + seal. Original spare part for Fagor FI-30, FI-48, FI-64, FI-72 -models. Z200703, 505051.

Dishwasher fine filter for Miele Professional:

Knobs for home appliances, commercial appliances & other devices. Including 5 knobs, spacers for 6/4,6mm & 8/7mm axles. Longer spacer 16mm from knob surface, shorter spacer 0mm. Knob diameter 39mm. Knob direction is fully adjustable. Stainless steel colored plastic.

Commercial dishwasher bottom spray arm holder + seal. Original spare part for Fagor Fagor FI-30, FI-48, FI-48B, FI-50, FI-64, FI-64B, FI-72 -models. Z200701

Commercial dishwasher over flow tube. Stainless steel tube, black plastic hat. The hat moves up with the water.  Fits Metos WD6 & WD7 -models. Including tube & top part, bottom seal not included.

• The total length of the hat at the bottom position is 335 mm
• Lower outer diameter 33, 5 mm
• Lower end collar diameter 75 mm

Oven / dishwasher water drain pump for commercial kitchens, professional kitchens or restaurants. 230V 50Hz 30W. Includes pump housing, strainer and magnetic pump. Replaces pumps Z220901000, Z220901, 12024273, Copresi EBS005/0014, EBS2556-4101, EBS2556-5300. Fits many Fagor models, including FI-30, FI-48B, FI-64B.

Forssan Huoltopalvelu Ltd does not take any responsibility for accidents occurring in the installation of products or damage caused by incorrectly installed products. The installation of any electronic spare part has to be installed by a professional person with electrical permits required by law professional.  If an electronic component is installed by a person without electrician degree or needed permits the customer is responsible for any possible accidents / damage. Electronic spare parts have no right of return if they have been tested in place on the device.

Commercial bottom over flow tube & seal ring for Fagor FI-80, FI-100, FI-120 -models. H 395mm, bottom D 40/44mm. Z710901

Hood type dishwasher hood gas spring. resistance 800N. Enforced model. Bolt attachment from the sides. Fits for many Metos Wexiödisk WD6, WD7, WD8 -series models. Chech the resistance from your old gas spring. Install gas spring allways piston rod down, to ensure lubrication. W713,0512. Stabilus Lift-O-Mat 6939 N R 0800N 353/23UF

• Distance between mounting bolts when free 285 mm
• Bolt M8 (8mm)

Commercial kitchen dish pre-rinse shower hose 547432. 1/2" attachments with inner thread. Lenght 100cm. Steelbraided plastic covered hose. Fits for many Echtermann Euro Clean  -models.

Commercial kitchen dish pre-rinse shower hose. 1/2" attachments with inner thread. Lenght 125cm. Steelbraided plastic coated hose. Fits for many Echtermann Euro Clean  -models.

Door magnet for WT100 and many other professional hood-type dishwashers. 23 x 16 x 28 mm, 5 mm thread. Original spare part.

Commercial dishwasher 50/60 Hz vibrating detergent dispenser GRI 230V. Fits for Metos WD-series professional dishwashers.

Professional dishwasher rinse aid pump Mod. CM 620120 IDRAULICO.

Professional dishwasher door spring, fits Metos Master 2 and Metos Master 3.

Professional dishwasher detergent pump. Hose pump 230 V, adjustable max. 5 l/h. Made in Italy.