Electrolux hose handle PureD9

Vacuum cleaner suction hose handle. RF remote controller included. The new version with "Smart" button, replaces the previous handle version with "Auto" button. Original spare part for many Electrolux PureD9, PureD8 -series models. Please ensure the fit with PROD/PNC number.

Handle reprogramming:

1. Plug the vacuum cleaner cord into an electrical outlet
2. Press the start and minus buttons on the new handle at the same time (task within 20 seconds of connecting the cord)
3. The vacuum cleaner should start for a short time (1.5 s) and then switch off
4. Programming successful

Reset instructions:

1. Plug the power cord of the vacuum cleaner into the socket
2. Press the start, plus and minus buttons on the new handle at the same time (to be done within 20 seconds of connecting the cord)
3. Unplug the cord from the outlet
4. Wait at least 5 seconds
5. Reconnect the power cord of the vacuum cleaner to the outlet
6. Press the start and plus buttons on the new handle at the same time (to be done within 20 seconds of connecting the cord)
7. The vacuum cleaner should start for a moment (1.5 s) and then turn off
8. The vacuum cleaner is ready for use.