Stick mixer axle glide bearing. Fits to top & bottom part of axle. Outer diameter 9mm, inner diameter 5,5mm, height 5mm. Original spare part for all Bamix models.

Hand held stick mixer shaft with bearings, rubber clutch and protective tube with seals. If the shaft of your appliance gets stuck, this part makes it easy to replace wearing parts from the Bamix mixer. The drive arm is assembled and complete, so it is only attached to the motor with screws. Check the product images that the rubber clutch on the top of your old shaft is equipped with a similar 7 x 3 mm hole. Original spare part for Bamix M133, M140 Mono, M160, M180, M200, L160 deluxe models.

• Total length 177 mm
• The length of the smooth part of the shaft is 98 mm
• The diameter of the fastening part is 43.5 mm
• Fixing holes 24 x 24 mm (34 mm across)

Stick mixer axle. Lenght 153mm, diameter 6mm. Original spare part for Bamix Mono & deluxe models like M100, M120, M122, M133, M140, M160, L160.

Stick mixer clutch between motor axle & drive axle. Attachment to drive shaft with threads, to motor axle with slot. Original spare part for all Bamix models since 80's (older rubber clutches had a wider slot for the motor shaft, this does not fit them. The rubber clutch of the old model in question is no longer available).

• Thread 4 mm
• Slot 7 x 3 mm
• Rubber part lenght 17 mm
• Total Leght 22 mm
• Motor end diameter 15 mm

Stick mixer axle bottom seal. Outer diameter 9mm, inner diameter 6mm, height 7mm. Original spare part for all Bamix & Unold models.

Stick mixer axle, axle casing & rubber clutch. Bearings & seals included. If the axle is jammed, you can easily fix your mixer with this axle casing. Original spare part for Bamix Gastro models.

• Total length 224 mm
• Smooth section length 148 mm
• Length from protective tube to mounting flange 205 mm
• Mounting holes in the flange 24 x 24 mm (34 mm cross)
• Flange outer diameter 44 mm

Stick mixer blade guard / cover. This part is attached to the drive shaft with left-handed thread. Original spare part for all Bamix models.

Handheld stick mixer handle part. Light grey plastic, dark grey rubber buttons. If the buttons worn out, this part has to be changed. Original spare part for Bamix Gastro -models: M200, G200.

Metal shaft for Bamix stick mixer processor blade axle.

• Total lenght 64mm
• Diameter 9mm

Stick mixer handle cover lid. Original spare part for Bamix M133, M140 mono.